Holmes' Wraith

[1beatjeep]

W/T/F all glued up & ready to go:

Axial R35 2.2 Falkens
Deuces Wild 2.2 Standard Foams
1.50" width 6 Bolt wheels
View attachment 306192


Ottsix U4 Silver
5.5 Double Deuce Comp Cut / Medium Outer
1.50" width 6 Bolt wheels
View attachment 306193




..Uploaded from the lab @ the C.I. Compound...

NICE list of Stuff there Eddie....

 

[JohnRobHolmes]

I'm equipped quite nicely for just about any occasion! I've got some vp axles here just waiting for scale c hubs to build up and throw 4ws under it next.

 

[wreckmaster516]

Hey john, o have your amazing 13t cm expert and im thinking about running 3s in my wraith. Will I hurt the motor 14t pinion and 87t spur @ 48p
Thanks in advance and I cant wait to see your wraith tearing it up

 

[JohnRobHolmes]

That should be pretty good gearing. Be sure the motor has 6 to 12 degrees of timing so the brushes last longer.

 

[JohnRobHolmes]

Start with a few parts

 

[JohnRobHolmes]

Fresh kicks and a rebuild were needed after worlds in Nevada. The VP axles were taken for another project and I had been beating on it with a 3500kv Puller 540 on stock gearing, so the frame had been broken from high speed impacts and the plastic wheels were getting wobbly. A fall ripped the hub out of one of the rears, so it was time to move forwards. Changes since the last update:


Subframe and bumper swaps on front and rear, some used aluminum parts I got from Harley.
Vanquish products beadlocks
Ottsix Racing U4 tires and dual stage foams
Holmes BLE sensored controller
Puller Pro 540 3500kv sensored 4 pole motor
Proto BLS HV500 servo
Ti steering link from VP