320mm wheelbase body options?

[GrittyMug345]

I just started looking for body options for my new Redcat E10 (first RC, new to the hobby!) but so far the only thing I have found made for a 320mm wheelbase is the Pro-Line Racing 322700 '72 Chevy C10 Long Bed. Can anyone point me towards some other options, if there are any? Thanks!

 

[DukeMinnix]

313mm is the standard 12.3 inch wheelbase, 7mm you're only talking about a quarter inch difference. You can split the difference front and rear and you'll be fine or if you were really dead set on it being spot on, shorter links front or rear.

 

[GrittyMug345]

313mm is the standard 12.3 inch wheelbase, 7mm you're only talking about a quarter inch difference. You can split the difference front and rear and you'll be fine or if you were really dead set on it being spot on, shorter links front or rear.

Just showing my newb colors on this one, lol! I'm still wrapping my head around mm as I've never worked with metric and haven't done any scale model building since I was a kid. I can definitely work around that small difference. Thanks Duke!"thumbsup"

 

[lonleycreeper]

I find with the older proline bodies, their Wheel base measurements are not always accurate. I always recomend getting the body you desire, and adjusting your wheelbase accordingly.

Trucks, and especially Jeeps are streached when lifted and when big tires are put under them, so a rc with a streached wheel base emulates that at times, esp. when running 2.2's