Wider Stance

[GrimReaper1216]

I'm looking to widen my stance on my G6. What are some hubs that would widen my stance? Links would be helpful!

 

[Norton]

Junfac makes wideners: 2.2" Wheel widner (4) (Offset: +13mm) [J51032] : JunFac.com

There is a wider one than this too.

Easy, cheap and they work.

 

[raul shabinguez]

I just got these for my deadbolt. Doesn't seem like a big change but it definitely helps roll overs and still looks fairly stock.
GPM Racing Alloy Hex (12 x 9mm) for 1:10 Axial Wraith + Other Axial Models, Blue:Amazon:Toys & Games

Only thing is the wheel nut covers can't be used.

 

[GrimReaper1216]

Thank you! I will be getting these soon.

 

[SkyJacked]

Heres what a g6 Looks like with a VP stage one and 2.2 junfac widens looks like... Just to keep in mind u gotta run 2.2 wheels or rc4wd 1.9 that's can run the 2.2 widner bolts. These are 2.2 axial rocketers with 1.9 rock beasts stretched on them.

This is 1.9 rc4wd wheels with axial sticky bfg krawler tires

Sent from my iPhone using Tapatalk

 

[krank22]

RC4WD mini 12mm wideners are great. No pins or rubber o rings. 15mm wide.

 

[Reddog95]

You might give these a try.

RCP X MIP CVD Part -...

 

[JDIRCC]

Heres what a g6 Looks like with a VP stage one and 2.2 junfac widens looks like... Just to keep in mind u gotta run 2.2 wheels or rc4wd 1.9 that's can run the 2.2 widner bolts. These are 2.2 axial rocketers with 1.9 rock beasts stretched on them.

This is 1.9 rc4wd wheels with axial sticky bfg krawler tires

Sent from my iPhone using Tapatalk

Or you can chuck the your 1.9 wheels like i did and drill the centers that little bit to fit the hex bolts

 

[JDIRCC]

and ps those stretched rock beasts look killer

 

[GrimReaper1216]

Heres what a g6 Looks like with a VP stage one and 2.2 junfac widens looks like... Just to keep in mind u gotta run 2.2 wheels or rc4wd 1.9 that's can run the 2.2 widner bolts. These are 2.2 axial rocketers with 1.9 rock beasts stretched on them.

This is 1.9 rc4wd wheels with axial sticky bfg krawler tires

Sent from my iPhone using Tapatalk

Would they work with axial 1.9 beadlocks?

 

[yotapower07]

What about the full width xr10 mod? Better steering and the increased width you're after. It will perform a lot better than wideners but it will also cost more too.

 

[Tmaxxed]

I did the wide xr10 mod to my g6 and it's awesome. Twice the steering and more stabile. I just used .25 hubs in the front and .850 hubs in the rear. Works awesome.

 

[Tmaxxed]

 

[driftah]

I tried the same path but then just grabbed some slw type rims and voila tons of vp widths to choose from...never goin back to wide hexes or adapters.

 

[Stormin2u]

There are lots of wheels that use VP's SLW hubs for width adjustment. IMO for the long run that's th way to go no matter what Axial style axle you choose. RPP also has EZ lock wheel that offers an adjustable hubs.

 

[byrnieman]

Can someone link me to a thread on the Xr10 mod?


Sent from my iPad using Tapatalk

 

[Jrgunn5150]

http://www.rccrawler.com/forum/showthread.php?t=387262

 

[raul shabinguez]

I just got these for my deadbolt. Doesn't seem like a big change but it definitely helps roll overs and still looks fairly stock.
GPM Racing Alloy Hex (12 x 9mm) for 1:10 Axial Wraith + Other Axial Models, Blue:Amazon:Toys & Games

Only thing is the wheel nut covers can't be used.

Here's an idea of what it looks like on my deadbolt. Stock wheels and tires. Nothing else required.

 

[Tmaxxed]

Rc bros has beef tubes that make the scx10 axles the right width for xr10 unis. Just install the tubes and wraith/xr10 knuckles and chubs bolt right on. That's what I did and it worked great.