What RC parts have you 3D Printed????

[JatoTheRipper]

I have a Bambu P1S. Mostly use it for ASA, PETG, and PLA.

You should have no problem. With a quick search I found some TPU profiles for the P1S online.

I chose the Overture TPU in Digitial Blue to start. They also have a High Speed version, but I didn't choose that for my first attempt at TPU.

Overture TPU 3D Printer Filament 1.75mm

【High-Quality TPU】: Made from flexible 95A TPU, Overture 3D printer filament provides superior pliability and durability, perfect for all your 3D printing projects, from engineering designs to creative 3D arts. 【Clog Free & Bubble Free】Designed and manufactured with clog-free patent to guarantee...

overture3d.com

 

[svt923]

I have a Bambu P1S. Mostly use it for ASA, PETG, and PLA.

I'll guess it isn't too different from my Prusa.

If you have a textured build plate, loosen the feed tension on the extruder, load up the default TPU settings, and you are like 95% of the way there. Maybe some small tweaking for perfect looking prints but more than adequate for functional stuff.

 

[Col_Sanders]

I'm sure the printer will be fine. I'm the weak link.

Maybe I'll order some TPU and give it a go. Are there any good free STLs for 4.75" inserts?

 

[svt923]

I'm sure the printer will be fine. I'm the weak link.

Maybe I'll order some TPU and give it a go. Are there any good free STLs for 4.75" inserts?

Not a lot of real good options on free files, these seem like the best of what's available

3D printed tire inserts

 

[Col_Sanders]

Same guy sells designs on Cults. I ordered some TPU. Will probably buy a file to test.

 

[JatoTheRipper]

I found this potentially handy little tool STL while searching for something else. It is a 3-pin JST connector pullers. I have not printed it, but may if I remember to do so. These little 3-pin JST connectors can be a bear and I am always worried I'll pull the wires out of the connector.

Miyoo Mini Battery Plug Puller (For Model V2/V3 Batteries) by GRU123

Battery Plug Puller for The Miyoo Mini (V2/V3 Battery)Remixed from a design by firia made for similar/larger JST connectors(thanks for sharing!).I reduce the sized to fit the Mini's (seemingly non-standard sized) battery plug and made some small improvements for strength. The puller slides in...

www.thingiverse.com