What powers your SCX10?

[Tedro]

A 55t is way too slow.


I'm about to get a HH 35t :twisted:

Just got in a Tekin 35t Pro-Handwound in the mail today:twisted:

 

[champ7times]

35 turn pro handwound

holmes toquemaster ecc

4s li po

 

[Planespotter]

Tekin FX-R esc, Tekin 35T machine wound motor, and an assortment of 6 and 7 cell nimh packs.

 

[SStone]

Novak XRS, Traxxas 21t Titan, Venom 6-cell NiMh, 16t Pinion (at the moment), HR 88t Spur and Tranny gears.

 

[Jose C]

My honcho:

2s lipo

RC4WD Outcry

45t motor

 

[traxxas4fun]

as of now..

stock esc
20t stinger motor
6 cell nimh pack

my honcho is made for the mud, there isnt many rocks around. so the 20t is just sweet. The wheelspeed is awsome

Later i want to get a 21t titan (once i get the summit tranny :ror

 

[2500hdon37s]

Just got in a Tekin 35t Pro-Handowund in the mail today:twisted:

i accualy got a 30t insted of a 35t as John was out when i got mine, still has loads of tq and im about to go lipo!

 

[TrailDawg362]

I recently dumped the 5700 brushless in favor of a HH Torque Master Pro 35T/CC Sidewinder ESC/3S 5K, much better low end resolution. The new motor is so much more driveable, especially for mild crawling. Just tooling around, mixed speed and crawling, I'm getting about 2 hours of runtime on the 5000 lipo's "thumbsup".

 

[loudrhythm]

I switched over all my Losi Crawler gear. Losi 21.5 brushless crawler system with a 3S lipo. Using a 16T pinion and it works great. Huge crawling power and decent wheel speed.

 

[Sith Lord]

Someone needs to update the tally on page 1. Would be interesting to see where we're at now...

 

[indiana mudcat]

I'm starting out with a old 2s goat and a really old ( but barely used) Reedy conquest plus 27 turn. Losi 3300 2s pack, if I want more speed I'll throw a sidewinder and 3s at it, used the goat cause it won't bother me one bit if it gets wet and goes up in smoke.

 

[gomery12]

Tekin 35t Pro, Holmes Torquemaster, 4S Lipo

 

[SinCity]

12T Slash Motor(for fun)
27T Axial Stock Motor (for mudding and water)
55T Integy Motor (for crawling and comp)


XL-5 ESC

 

[WIDELOAD]

EZ-Run brushless ESC
1200kv turnigy outrunner motor
3S lipo.

outrunner makes for a nice and controlled bottom end with miniman cogging/stutter and it still has a decent turn of speed on 3s."thumbsup"

 

[ynmech]

Honcho updated to 23t JPH sport

Hilux:
2S 2600
Novak 2s Goat & 18.5bl

Both running 32p
Honcho 13t pinion
Hilux 16t pinion

 

[alexchen86]

Honcho 1.9: 27T Axial brushed/Sidewinder ESC on 3S lipo 14/87 gearing loads of torque already and good wheel speed.

Retro Truck 2.2: 35T RC4WD brushed/XL5 ESC on all batteries from 6-8 cell NiMH to 3S lipo gearing is 14/87 as well.

 

[kurt]

i thought i updated this but i guess not.

Was running a 14T puller on 6S with a mamba monster and the parts are in the mail to switch it over to a tekin redline 21.5T on 6S with a mamba max pro

 

[evo5]

Tekin FX-R esc, Tekin 35T , 14T pinion, and 3S lipo...

 

[stick-boy-rick]

stock honcho gearing
45t tekin
fxr ESC
6 cell nimh
pro-line flat irons
truck is pretty basic

 

[Gimp]

Holmes BR-XL
3s LiPo
Integy 35T
14T Pinion
Under-Drive Rear Gears