What did you do to you SCX-10 today?

[kuyawil]

Over a week ago, I installed a SuperShafty Bombproof AX-10 tranny (mirrored) and just this past week, I mounted a new KMS K3 (180oz) servo winch on the Jevne Racing Recon Brick Plate. My Bulldog 9300XT has been relegated to fair-lead duty for this awesome winch. Here's a couple pics.

Mirrored SuperShafty Bombproof Transmission

KMS K3 Servo Winch

 

[Reaxion911]

Wow i built a servo winch a while back and was having some issues with spooling and i think that mount/fairlead is the meow for dolly!

 

[Case182]

New R2J sliders, XL Swampers with CI foams, and 1.9 Methods from VP.

 

[kuyawil]

New R2J sliders, XL Swampers with CI foams, and 1.9 Methods from VP.

Nice! I got the XL's too but the rub was pretty bad. How bad is the rub with yours? I was considering raising the body posts or maybe a lift kit but I'm still deciding and wondering what others have done with this matter regarding the XL's.

 

[Case182]

I only rub at full flex. But it's not too bad. I've got three full holes on top of the pin in the body posts. So the forth from top has the pin in it.

 

[hpiguy]

Fabbed up some rock rings for the new to me axial beadlocks.

 

[OH6HEMI]

Nice! I got the XL's too but the rub was pretty bad. How bad is the rub with yours? I was considering raising the body posts or maybe a lift kit but I'm still deciding and wondering what others have done with this matter regarding the XL's.

Me too. Lol. I went ahead and lifted mine.

 

[OH6HEMI]

Well I made a pretty good score today. Got a traxxas xl-5, vapor pro esc, vector 4000kv 4 pole, tons of lipos, an x charger and a vintage trinity motor. And other misc parts. Can anyone guess how much?)

 

[OH6HEMI]

And thanks to Mr. John Rob Holmes amazing customer service I was sent a replacement crawl master expert 13t after I guess I got a bum one. FREE OF CHARGE!!!! Even got some stickers A HUGE thanks goes out to Holmes Hobbies.

 

[kuyawil]

Me too. Lol. I went ahead and lifted mine.

Thanks for sharing... By the way, is that the ProLine 1980 Blazer body?

 

[OH6HEMI]

Yes sir it is. I love it! I've got a buddy with a real k5 so I tried to copy it a little bit. Lol our blazer do the same things! Hahahha.

 

[OH6HEMI]

Thanks for sharing... By the way, is that the ProLine 1980 Blazer body?

 

[OH6HEMI]

That was on 35" boggers. Everybody's phone was dead I wish I had pictures of the hole we was in after this. There may have been alcohol in involved. Lol.

 

[OhioGuy82]

Traced my ongoing steering slop issue. Servo bushing is the culprit.. :idea:

 

[AZINDY]

I worked on converting my honcho into a hotrod inspired rockrod. Check out my thread "Azindy's version of a rockrod" for more info and pics of the build so far.

 

[6sharky9]

Traced my ongoing steering slop issue. Servo bushing is the culprit.. :idea:

Stock AE2 servo?.. You can fix that with a bearing conversion if you're happy with the servos power.

 

[OhioGuy82]

I have a bearing on the way. I hope it will make it here in a timely manner. Weather permitting. I'm more than happy with the stock servo.

 

[mallcrawler24]

moved my shocks into the alpha angle, made a bumper lift but will need to redo it since its plastic. took it out today for a little bit it was great. love this truck.

 

[OH6HEMI]

moved my shocks into the alpha angle, made a bumper lift but will need to redo it since its plastic. took it out today for a little bit it was great. love this truck.

Id like to see it got any pics?

 

[canadianbacon]

Took 'er out for a winter spin.