What did you do to you SCX-10 today?

[Pabust]

Installed some Vanquish Currie F9 XR10 width into mine:

8)

 

[stonecold]

Mounted up some custom length trailing arms for my Axialfest 2016 G6 project. Loving how it looks and how much of a difference it made.

 

[Brake Weight]

I put a 78-48p spur, a 23 tooth pinion, and a 20t motor. It's fun again. I think I'll swap my ar60s in this weekend.

 

[clodzilla319]

new Tires .. Falken Wildpeaks!! havent Run em yet, but Love'n the looks of em!!




"thumbsup"

 

[NorCalNomad]

Spent some time untangling a small mess

Sent from my phone

 

[caleb.cole]

Spent some time untangling a small mess

If this happens again you should remove the wheel and the hex behind it. This way you will have full access to the entire area that the plastic is caught on, and you should be able to simply pull it all off at once.

 

[Brake Weight]

Made it a true Wroncho using the Wraith skid and HR Wraith links. But now I don't like it because the servo is hitting the bumper and frame...and it's too tall.

Edit:

 

[slimfire]

I rebuilt the servo mount plate to have servo that bit rearward to prevent it from colliding with the bumper.
About the height I think you have to play with mounting holes and shocks length and oils / springs..

 

[kookie31]

Went for a drive

Sent from my iPhone using Tapatalk

 

[clodzilla319]

flipped the tranny... just cuz...

 

[Caustic101]

A couple days late to post but, just got my Falken and minutes later tore into it without even running it :mrgreen:

 

[Brake Weight]

I rebuilt the servo mount plate to have servo that bit rearward to prevent it from colliding with the bumper.
About the height I think you have to play with mounting holes and shocks length and oils / springs..

I cut the ends off of the frame rails in the front and swapped to the shorter Honcho shocks. Now it'll go bumperless, which is fine with me because the axle is ahead of the bodies I have. It works much better, but I'm wanting this more as a basher. So I dug into my bag of springs and found some old HR springs I've had since I bought the Honcho a few years back. These are much stiffer and work well for this. The height is also lower reducing the drive shaft angles and bringing the CoG down enough it doesn't roll over every turn.

Now I just need to fab up some links to fit something I've got.

 

[shiftauto]

Some inner fenders.

Trump is a joker not King

 

[shiftauto]

Mounted these up for a friend. He'd better like em because it was a PITA!!!

Trump is a joker not King

 

[HockmanRCBoys]

My son just took Traxxas Stampede suspension links and made SCX10 shock tower braces...turned out great!

 

[caleb.cole]

I added a Yeti Fuel cell to my honcho along with a fuel hose. I will paint it red and add more details later on.

 

[z50king]

Installed 4 rock lights, Roof LED bar, and Stinger LED bar. I did all this at the event and then wheeled it for 3 hours that night.

Thanks for Robert's RC Lighting

Sent from my SM-G900T using Tapatalk

 

[Old Kid]

Went crawlin'./DSC_0214.jpg[/IMG][/URL][/IMG]

 

[tda271]

Started painting new unlimited body. Shot the roof and fenders, will finish the body in silver

Sent from my SAMSUNG-SM-G890A using Tapatalk

 

[z50king]

Started soldering JST connectors to my lights and then quit before I had soldered anything. Maybe tomorrow

Sent from my SM-G900T using Tapatalk