SCX6 CLOD - DUAL BRUSHLESS - 35lb MEGA RIG!!

[ferp420]

just for reference the red raptor is the same body you used on your clod the f150 extra cab is also the same size as the body you used
so the scx6 body is at least 2 inches wider than your clod body and a inch or 2 longer a ruff measurement of the wheel base is 24 inches with ruffly 4 to 5 inches under the belly in that picture it was sitting on top of a Folgers coffee can
I would like to see your clod pull a full size SUV like in the scx6 videos
maybe a vid of a 6 year old riding it or pulling a wagon load of kids for no other reason than to see it

 

[ferp420]

your clod is bearly bigger than my trx4 and has the same new bright raptor body it's 13 " wide and 18 wheel base and the scx6 covers 90% of the rig with just the cab

 

[ferp420]

did you see that cab swallow those 3.8" 40series tires

 

[ferp420]

this pic on the bottom is a 1/6 scale newbright Ford raptor body the same one you have on your clod on top is the scx6 honcho cab it literally makes the 1/6th newbright body look tiny

 

[ferp420]

and the orange nylint jeep body is a true 1/6th scale that's a 12 inch Luke Skywalker in it and notice his head is covered

 

[WRXronald]

Thank you that post is super helpful to tell better.

Guess I just have to get my rig up next to one.

The body does look big I acknowledge that... guess I wasn't trying to say it's not big.

Just saying my rig has...

EXACT SAME WHEELBASE AS SCX6 19.74inches

TALLER TIRES BY ABOUT 1 INCH. (look up 3.8 Rock Mashers 8.2ish inches tall 3+ wide)

Weighs 23lbs all up with lipo (not too far behind sxc6 but yeah i lose here)

HAS ON-BOARD AIR (SCX6 doesn't even have aired tires yet?)

I'm running (as shown in vids) 14.5inch width outer tire to outer tire (I lose here but I gave away over an inch of width to cut and shut my Mashers into Pizza Cutters... so do I really lose here on overall width -- the rig performs better everywhere just about with the pizza cutters setup and AIR).

So,

Ok..OK... ferp wins!! Cookie for my man. I appreciate you posting up and showing how big that bad boy really is.

I don't agree about the dwarfing statement... but hey let's rock crawl and see who's the dwarf by performance measure?

My rig is up running as of today ready to roll now with twi 80amp RHINOS bedazz dragbrake and sine wave control on 350kv Turnigy AERODRIVE outrunners 4250 ----- each capable of up to 12s and 1500watts. I'm running 8s.

No ill will here just slinging a Lil FUN... high likelihood I get lambasted in most categories by the beast built by the best..

AXIAL.

LFG

 

[ferp420]

not trying to take away the awesomeness of your truck I bet it crawls awesome too
if ya ever make it to the hammers I'll be stuck between a rock and a hard place or in the sand somewhere lol I'll crawl with ya anytime

 

[WRXronald]

not trying to take away the awesomeness of your truck I bet it crawls awesome too
if ya ever make it to the hammers I'll be stuck between a rock and a hard place or in the sand somewhere lol I'll crawl with ya anytime

"thumbsup"

we should prolly burn one together too :mrgreen:

 

[WRXronald]

Still creepin.....

Lets make it official - a YOUTUBE CALL OUT. Your SCX6 can silence ol' piddly CLOD in one fell swoop.

Simply come climb these stairs and make it look oh so easy....... I have cash that says it can't..... :mrgreen: "thumbsup"

https://youtu.be/3Om_o01UAac?si=RQ1w0TaO0xncEZfa

<iframe width="560" height="315" src="https://www.youtube.com/embed/9CtpAsZyAXY?si=yFr1RtNVIK-z7XKQ" title="YouTube video player" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share" allowfullscreen></iframe>

 

[ferp420]

"thumbsup"

we should prolly burn one together too :mrgreen:

ya and wheel some Subarus lol

<iframe width="560" height="315" src="https://www.youtube.com/embed/MoQYwDlQHdw?si=T9aXDejmlz4RAiFm" title="YouTube video player" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share" allowfullscreen></iframe>

Simply come climb these stairs and make it look oh so easy...

I don't have those stairs but I do have rocks

<iframe width="560" height="315" src="https://www.youtube.com/embed/cvV90kCsw4k?si=hWzBtUul3GFdL6Uw" title="YouTube video player" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share" allowfullscreen></iframe>

 

[WRXronald]

The dunes now that takes nads.

The vid of the scale SCX6 on the rocks - - nice, impressive, but not that much? Its all flat and massive grip surface on the rocks, i mean flat as in no ledges, i get its off-kilter/balance.

Still say bring it and do the wooden stairs 6 inch +. That things got nothing for me. That rock vid has no tall ledges to clear, just a flat hill climb with MASSIVE grip coming from the rocks under all four tires.

Not saying i'm not impressed at all --- i am. SCX6 will always impress me i think it can take WAY more of a romping than my rig. Links, bits, small screws etc really need an upgrade on my chassis, bad. I almost bought the SCX6 chassis and just swapped onto it sans trans, driveshats etc on CLOD Axles. But thought maybe it was a waste and too heavy... I might still try. SO PRICEY.


Just separating wheat from chaff one way or another. :ror:


Come climb the wooden low grip tall attitude stairs SCX6 - just get up 2 of them, no problem, right?

muhuahhahahahahahhah


I don't even think stock it has ANY chance at all --- https://youtu.be/nygnLFs7jkU?si=MXccXa1GGHX2P-s_ ---- snapped rear end ring/pinion just on some rocks running 3s 5000mah? meh... please, bush league.

3s isn't enough to get out of bed for let alone push a 20lb rig. I mean, don't get me wrong, i like 3s and all, my TRX4 runs on 3s -- 8400mah (3 total onboard lipos)

You'll need some 3.8's or serious 2.9 tire mod or WILD and CRAZY wheel speed all seems would break something in the stock version of SCX6 (and no please do not come over and hit my wooden stairs at 20mph to THRASH your way up lol). Just stay home if thats the plan. This is about crawlin up and incline when the grip chips are down and all ya got is a big grippy half flat but just properly aired tire and little shimmy wiggle to get over the humps!

Oh and the fact thats someones "first crawl" in the SCX6 --- one hell of a driver must have some hours - being the stakes are huge if it were to take a tumble and all - its hard to know a rig well, its pitfalls/weaknesses the first time crawling with it.

 

[WRXronald]

and the orange nylint jeep body is a true 1/6th scale that's a 12 inch Luke Skywalker in it and notice his head is covered

The latest -- this vid should prove beyond a doubt the size capability of a Clodbuster setup ---- can support an SCX6 body no problem. Also - showing next to my 1/6th New Bright Jeep Rubicon --- same size - same width, sure the Honcho cab is beefier, but the fenders on the Jeep are actually about 1/8th inch wider overall.

I do concede the Honcho is a fair amount larger than the 1/6th New Bright Ford Raptor body --- but same when compare the Raptor to the Jeep - - it looks smaller by far. When I run the Raptor the truck looks like it has Monster Truck tires kinda like a Sparks Auto build. WHen i ran the Jeep in the past it looked a little more to scale for a Jeep maybe sitting on outrageous 48's or 52's (feasible but still nutty!)

I'm going for a stretch to 25 inch wheelbase and a Long-bed pickup truck setup using the SCX6 Honcho. I think the tire size with the almost 9 inch Rock Crushers will look something like 40's-ish, maybe 42's.

You weren't wrong though - the Honco body is HUGE!!!! Videos and pics just don't do it justice until its in hand. I abo****ley agree there.

Just not alot bigger if at all than the true big 1/6th Jeep New Brights, both the giant Nylint and the large Rubicon TJ that I have. Of course the TJ was MUCH cooler. "thumbsup"

Waiting on some L channel to stretch the chassis and think I'll be able to see it better once the cab is painted. Struggling with proper wheelbase -- thinking 24.5" to 25.5" with a 15.5 to 16.5 inch flat bed.

New tires in this vid - RC4WD Rock Crushers on narrowed 3.8 Axial beadlocks. (The old Crushers i had were generic Redcats and they were actually shorter by almot an inch and had smaller lugs. The RC4WD when filled with my air system are 8.75 inches tall!!!!! AWESOMENESS. They are FLAT in this vid with 0 air in the tires just fyi.

sorry for the bad vid and sound -- its late.


Quick youtube short - https://youtube.com/shorts/A4gEqtofkBY?si=CoqqiOF9CUO7AE02

Link - https://youtu.be/wNdl2mqctZ8
<iframe width="560" height="315" src="https://www.youtube.com/embed/wNdl2mqctZ8?si=ntfs7s4J5HHjhmGD" title="YouTube video player" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share" allowfullscreen></iframe>

 

[bgredjeep]

The ability to park a car under it. The true measure of any high performance offroad machine...

 

[ferp420]

when your clod is ready for chocolate thunder let me know
https://youtu.be/sKfXN8hWajo?si=AhTD1D7JGFDuTH9I
at night
https://youtu.be/Hk7Voc_kEwM?si=onn4gmAkaP-ZDwew

 

[WRXronald]

The ability to park a car under it. The true measure of any high performance offroad machine...

big red yeah i completely agree!! im assuming you saw my video on the tube -- full size 1/10scale Tamiya TT02 GTR R34 parked up under my rig 100% no problem TONS OF CLEARANCE to spare?

It's linked in this thread I'm pretty sure... but just in case....

<iframe width="560" height="315" src="https://www.youtube.com/embed/rtu_vaxk7jI?si=_DgzbgSw7MPYXy_g" title="YouTube video player" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share" allowfullscreen></iframe>

"thumbsup"

 

[WRXronald]

Recent axle upgrades...

I plan to add a 30mm offset axle attachment but in this pick so far i have a +10mm on their. So will be adding another 20mm per side of width to the rig, ultimately rounding in at about 16.4 inches outer tire to outer tire.

With a slightly wider setup and moving the shocks/links into proper mount points theres now room to fit a 1/5th scale servo in there nicely - i crafted a little mount plate similar to the one that was already on the rig but shifting in slightly to accomodate the additional servo bulk -- 1/5th scale servos ARE BIG.

I have a 3s powered 1/5th scale servo on order outputting 170kg of torque at 12.3volts !!! :ror::ror::ror: YES MAAM! The one in there now is 60kg at 8.4volts.

Those are SCX6 links and repurposed panhard bar/steering linkage to fit my setup decently. Doing same to rear but leaving 1/10 servo and steering to keep it lightweight.


These are cheapo SCX6 upgrade links and pretty sloppy but i'm just going to buy sixteen 4mm steel ball bearing heims from Ali for $1.47 a piece and hack these ends off and drills/tap for the new high quality heims. The aluminum rods themselves are VERY solid at least for what i'm seeing. My former links NEVER bent and were PUNY compared to these. I did break alot of plastic rod ends though as the truck got heavier. Ti eventually!!!!

60 second Youtube short of the axle upgraded and on the scale... https://youtube.com/shorts/Qz4d-VX5d9Q?si=dYfaP6jhkQBlXiqI

Link - https://youtu.be/QjTEIEcQsd4?si=02fI9dNq5zAARttl
<iframe width="560" height="315" src="https://www.youtube.com/embed/QjTEIEcQsd4?si=ltFYkfienmMFOYto" title="YouTube video player" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share" allowfullscreen></iframe>

 

[WRXronald]

when your clod is ready for chocolate thunder let me know
https://youtu.be/sKfXN8hWajo?si=AhTD1D7JGFDuTH9I
at night
https://youtu.be/Hk7Voc_kEwM?si=onn4gmAkaP-ZDwew

Awesome terrain! But looked like alot of sand, uh, tough grit on parts i soft these days sorry. :lmao:

I did do big rigs (as in real thing); lots of fun but alas, i'm old, tired, rather play with little big rigs these days. Besides i traded up for an R35 --- different kind of FUN :mrgreen:

We had alot of fun this day in an '06 TJ this was just the first shot warming her up and the camera battery puked and it was all over. All the silver was missing under a fresh coat of its own chocolate thunder on the ride home that day my bro in law and i put 'er thru some paces up the brick mountain and then some.
"thumbsup"

Link - https://youtu.be/mAH4_VTs89s?si=1DbwjOaBeNcoDJ8A
<iframe width="560" height="315" src="https://www.youtube.com/embed/mAH4_VTs89s?si=FGlZXcdh0q8zMffz" title="YouTube video player" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share" allowfullscreen></iframe>

Also rebuilt a BEAUT from the ground up and made it SIIIIICCKKKK..... Sold at Barrett for a PHATTY price. :ror: 1984 Jeep Scrambler!!

Just listin to the purr of that VORTEC V8!!!

Link - https://youtu.be/H6PCyjMW9-A?si=KHJVYnDgbNI91KCI
<iframe width="560" height="315" src="https://www.youtube.com/embed/H6PCyjMW9-A?si=mpcOkyxLJKhgGXtZ" title="YouTube video player" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share" allowfullscreen></iframe>


I love rigs of all sizes just like the next random crawler dude usually found somewheres hiding under a rock.

 

[ferp420]

playing submarine

<iframe width="560" height="315" src="https://www.youtube.com/embed/IXxKtU2hIAc?si=YbGGazqJod8cVSgw" title="YouTube video player" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share" allowfullscreen></iframe>

 

[ferp420]

I'll bet that honcho body will look sick with those 40 series wheels and giant tires

 

[WRXronald]

I'll bet that honcho body will look sick with those 40 series wheels and giant tires

It's ROCK READY AS OF TODAY!!!

Quick 1 min walk-around of the finished product - articulated a bit. Also a short in here too setup to haul a Tamiya TT02 Nissan GTR R34 - - I'm going to haul this car thru some terrain if all goes at planned that the TRX6 could only dream of.


Link: https://youtu.be/Atrl_dWSigE?si=8t7DIgdS8p0gLhHW
<iframe width="560" height="315" src="https://www.youtube.com/embed/Atrl_dWSigE?si=5uCReaVYDn8yGfUJ" title="YouTube video player" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share" allowfullscreen></iframe>

It looks pretty solid and I'm ELATED with how the transformation and addt'l stretch turned out - i went with black paint scheme... still working on interior but body's mounted up and all kinks are worked out except for stronger servo braces to come in the future, stronger 1/5th scale servo than the one in there now (from 60kg to 170kg up front, and upgrade rear from 1/10 to 1/5th servo).

Future plans are for automated air-compressor on-board powered by 12v w/radio controlled on/off, LED light bar and headlamps are on order, as well as a set of SCX6 alloy shocks. Not sure if they'll be too hard but worth a try - alot of my weight is unsprung though down in the axles and tires. But these 1/8th scale shocks are nearly maxxed on stiffness to get to 100% ride height (which is really a bit too high but my setup is intentional to run at mid or even full droop ridfe height on softest shock setting with ZERO tire rub. Perfect for crawl and as low a CoG as could be for what it is). There's over an inch of ride height adjusetment right now but adjusting the shock collars from max to min ---- pretty decent range i'm happy with so far.

The tailgate folds down, and future plans to make the side panels of the bed fold down as well on hinges for a legit full flatbed experieance.

I already test fit Tamiya TT02 Nissan GTR R34 in the rear as a EXTREME OFF-ROAD HAULER setup. It fits with the tailgate down so we are good to take it out for an extreme crawl -- the SCX6 shocks may help with that extra weight out back i think. (TRX6 can't touch the kind of terrain we can, mahahaha!!)


Last item on list is trying it out with another 0.8 inches wider on each side (+1.6 inches overall) once i get the new wideners.

I love how it looks all JACKED UP at max ride height but its a bit ridiculous :mrgreen: Don't forget these tires are 8.5 inches tall and the bottom of body is sitting about 1/4 inche above the top of the that tire. Looking at Honcho picks online with Proline SuperSwampers and dual stage foams the bottom of Honcho body looks 4.5inches, maybe 5 inches off ground? My setup is meant to be extreme though!


Lets get out and crawl -- who's in Northeast OH area?

"thumbsup"