Scale Crawler Picture Archive (PICTURES ONLY!)

[neo]

Well, she's finished now. I have fitted the TLT wheels/tires just to see what it looks like, still undecided though.
Pretty pleased with the result overall."thumbsup"

 

[pigeonfarmboy]

My Army!

 

[swamped2a]

Truck Base : AMT snap-fit toyota chief 4x4

Body: AMT '80 toyota hilux

ESC: ES-01

Motor(s): HS-85bb servo

Servo(s):hitech HS-50

Trans: SSMT trans, cut down

Axles: SSMT

Tires: Aoshima Swampers

WB: 4 1/2"

Overall Width: 3 3/4"

Diff clearance: less than 1/2 inch

Center Chassis clearance: just shy of 1"

Overall height: 3 1/4"

Weight: 8.1 ounces haha

 

[4stAir]

heres my staticX bronco....

 

[H I R O]

 

[foodstamp]

truck.....red neck

Truck Base :custum chassis, with a tlt axil

Body: clod body with a cowl induction hood, and i dont have new pics, but i have a stainless grill

ESC:tekin 2

Motor: 55T Lathe

Servo: Hitec 645 ms

Trans:the new rustler tranns

Axles: TLT-1.

Springs: Jugg leaf springs

Tires: swamper boggers

WB: 11"

Overall Width: tlt axil width

Diff clearance:idk

Center Chassis clearance: alot

Overall height: idk

Weight: about 9 lbs

<p>

<p>

<p>

<p>

 

[Just Zach]

K2-3L Build aka midnight

Truck Base :TLT w/ K2-3L chassis

Bodyroline Ford Courier

ESC:Novak

Motor(s):Integy 55t

Servo(s):Hitec

Transede

Axles:TLT Locked

Tires:Moab 2.2

WB: 12"

 

[Metal Masher]

Truck: Wrinkles

Truck Base : Mountaineer

Body: Hand formed Aluminum

ESC: Novak Rooster

Motor(s): Zipp 27T mod

Servo(s): JR Z250

Trans: 1st Gen Losi Junior

Axles: Stock Mountaineer

Tires: 1/18 Nylint

WB: 11 3/8"

Overall Width: 10"

Diff clearance: 1" :roll:

Center Chassis clearance: 1 3/4"

Overall height: 7 1/4"

Weight: 13.5 LBS

 

[brendan h]

Truck Base : TLT

Body:Nissan titan

ESC:LRP Airunner (waterproof one)

Motor(s):55t

Servo(s):hitec 645mg. winch=savage steering one

Transede

Axles:tlt

Tires:moabs (narrowed claw dawgs to come)

WB: 11.5inch

Overall Width:NA

Diff clearance:NA

Center Chassis clearance:3.3inch

Overall height:NA

Weight:alot

 

[DISTURBIN' tha PEACE]

Truck Base : Bruiser

Body: Toyota

ESC: SR

Motor(s): Integy 55t

Servo(s): Hitec 9599TG

Trans: Pede, locked with bearings

Axles: Bruiser fronts, w/ bearings

Tires: Geolanders

WB: ~11

Weight: heavy

 

[TwistedCreations]

Here is my Yota.. Still have a ton of work to do to it.

Truck Base : TLT/ Toyota

Body: Mcallister Toyota truck

ESC: Mtroniks waterproof

Motor(s): 22t MM motor

Servo(s): Hobbico CS- 70's

Trans: Emaxx

Axles:TLT

Tires: 2.2 swamp dawgs on Kyosho 4runner wheels

WB: 12"

Overall Width: 9 1/2"

Diff clearance: 1 1/2"

Center Chassis clearance: 3"

Overall height: 8 1/2"

Weight: 7lbs.

Click for more pics

Click for build thread

 

[BigBaller]

Hilift
Novak Brushless Crawler system
JR9000T swinging the front tires
Hitec 645 shifter
4200 stick pack in frame
body lift mod
RC4WD narrow beadlocks
RC4WD 12mm wheel wideners

I loved the look so much I went right out and bought another brother."thumbsup" No no silly, the brother to this Hilift.:lol:

 

[RydeFab]

homemade aluminum ladder chassis, f650, tekin rebel 2, 55t lathe,

hitec 5955, losi xx-t trans, tlt axles, imex swampers on imex wheels,

14" wheelbase, 3/4 eliptical juggy leaves in front, 4 link in rear,

homemade front, rear, and rack out of 1/4" steel brakeline,

heavy weight...........................................

 

[Rockatansky]

Midnight Pumpkin HOTROD truck

Well, I got to looking at the Tamiya M03 FWD chassis and noticed the wheelbase would be close to the Midnight Pumpkin's shell. Turns out, it was a perfect fit. I mounted some HPI "vintage" series wheels and tires to complete the look for a nice "hot-rodded" truck. Click the link below to see the truck, and a couple of others too. ENJOY.

http://miamireiki.com/crawler_page.htm

Cheers

"Mini Cooper" M03 chassis
FWD not locked
Manta-Ray adjustable ball diff
Midnight Pumpkin body
HPI "Vintage" series rims
HPI "Vintage" series tires
Overall length is approx 12"

 

[elaz]

Jugg

Truck Base : Jugg

Body: F-350

ESC: Super Rooster

Motor(s): 2x reedy 19Turns

Servo(s): ERG WRX (SANWA)

Trans: JUGG

Axles:JUGG

Tires: 2.2 PROLINE MOAB

WB: 12"

Overall Width: 11 3/4"

Diff clearance: 1 1/4"

Center Chassis clearance: 4 1/4"

Overall height: 11"

http://i101.photobucket.com/albums/m80/elaz_74/RC/P1040187.jpg

http://i101.photobucket.com/albums/m80/elaz_74/RC/P1040195.jpg

http://i101.photobucket.com/albums/m80/elaz_74/RC/P1040197.jpg

http://s101.photobucket.com/albums/m80/elaz_74/RC/

 

[envious8420]

duallie

Truck Base :sassy chassis for a clod

Body:modded clod

ESC:novak

Motor(s)ld stock motor

Servo(s):traxxas 2055

Trans:losi xxxnt

Axles:tlt

Tires:front modded nylint, rear nylint tires on a modded tlt wheel

WB:12in.

Overall Width:9.5in.

Diff clearance:5/8in.

Center Chassis clearance:1 and 3/8in.

Overall height:8in.

Weight:4lbs.

 

[Crawln Coles]

My Silverado

Here's the specs:

Bruiser chassis
turned down TLT shocks
RC4WD R2 tranny
35T drift motor
Yokomo drift ESC
Spectrum rx
narrowed revolvers
cut and shut dirt works

Headlights
http://i105.photobucket.com/albums/m231/crawln_coles/ebay073.jpg

Maxx Flex
http://i105.photobucket.com/albums/m231/crawln_coles/ebay074.jpg

 

[microgoat]

Here's my latest:

Hi-Lift chassis
homemade IH Scout body
narrowed Imex Claws
homemade spoke rims
Novak Crawler system

 

[raul duke]

Rubi K2-3L scaler

My Rubi K2-3L

-Working winch and lights.
-Homemade front and rear bumpers.
-Homemade rock sliders, tire carrier and roof rack.
-Homemade 1.9 mashers on HPI 6mm offsets wheels
-K2-3L chassis
-Locked pede tranny and tlt diffs
-Rebel II esc, 45T lathe w/90t spur and 21t pinion

 

[mwoo]

Working on my Bruiser

Truck Base : Bruiser

Body: Bruiser

ESC: Novak SD

Motor(s): Integy 55t

Servo(s): Hitec 645

Trans: Stock Bruiser

Axles: Bruiser / front springs / rear 4 link

Tires: M2K

WB: 11.75

Overall Width: ?

Diff clearance: ?

Center Chassis clearance: ?

Overall height: ?

Weight: 10.5

Working on a winch