Scale Crawler Picture Archive (PICTURES ONLY!)

[rbgerrish]

Chassis: Dorkstar Metalwerks

Body: Ford Courier

ESC: Super Rooster

Motor(s): Magnetic Mayhem

Servo(s): GWS Metal Geared

Trans: Stampede

Axles: TLT

Tires: Geolandars, Moabs, Narrowed Mashers

Wheels : Hpi

WB: 11.6"

Overall Width: ?

Diff clearance: ?

Center Chassis clearance: ?

Overall height: ?

Weight: ?

 

[Sr.Irie]

Truck Base :TLT
Body:Bronco
Frame:Hillbilly tube
ESC:Old school 610-hrv
Motor:Hillbillywound 33t
Servo(s):F-hitec 5995, R-hitec 645
Trans:Stampede
Axles:TLT
Tires:Moab
WB:12"
Overall Width:10 3/4

 

[1BadJeepBruiser]

Truck Base : Kyosho 4runner TLT-A-FIED with EXO

Body: 4runner

ESC: JR

Motor(s):Kyosho

Servo(s): JR 650z

Trans: locked PEDE

Axles:locked TLT

Tires: Moabs on original wheels

WB: 12 1/2

Center Chassis clearance: more then 3

Overall height: 10 inches ?

Truck Base : TLT (SOLD)

Body: Ford Courier

ESC: JR

Motor(s): 55t lathe

Servo(s): JR 650z

Trans: Locked Stand up Pede

Axles: locked tlt

Tires: geolanders

WB: 12" maybe?

Weight:

Truck Base : Bruiser

Body: Bobbed Mountaineer body

ESC: SR

Motor(s): Lathe

Servo(s): 650z JR

Trans: CUSTOM Juggsterr single speed trans and mount

Axles: Bruiser with 4 rear hubs and wheel spacers up front

Tires:moabs

Other: Working winch, interior cage, bed cage, fuel cell, rear seating, Buggy leafed, bob'd bed, dual shock mounts more shiat then I can list

Truck Base : Boyer Built frame (SOLD)

Body: HPI Bronco body cut and dove tailed

ESC: Novak SR

Motor(s): 55T lathe

Servo(s): Hitec high torque

Trans: locked Stand up pede

Axles: locked tlts

Tires: Moabs on RPMS with Juggsterr rock rings

Truck Base : HULK WERKS Pre runner

Body: proline ford extended cab with TRUE FIRE paint scheme

ESC: super rooster

Motor(s): lathe
Servo(s): Jr 590 up front, futaba 9402 in the back

Trans: locked full metal geared PEDE

Axles: locked tlts

Tires: Moabs On RPM wheels with Juggsterr rock rings

Truck Base : Bruiser

Body: Nissan Pathfinder body

ESC: Tekin rebel 2

Motor(s): magneticmayhem
Servo(s): hitec

Trans: locked PEDE

Axles: Bruiser with bearings, shimmed pinion, rear hubs all around

Tires: soon to be mashers on custom Bruiser wheels

Truck Base : high lift

Body: high lift

ESC: LRP water proof runner

Motor(s): magneticmayhem
Servo(s): JR high torque

Trans: stock 3 speed

Axles: stock with bearings and locked
Tires: stock
Wheels: Bruiser Builder custom aluminum wheels
Extras: Scale Hobbies Cap, Juggsterr rear bumper and grill guard, sho dog customs fox shock resavoirs, 2.2s- narrowed claw dawgs.... all coming soon

 

[bigred]

Truck Base : TLT

Body: Rubi

ESC: Rooster

Motor(s): 55t Lathe

Servo(s): Junk!!

Trans: pede

Axles: TLT

Tires: Cut-N'-Shut Proline Dirt Hawgs

WB: 12.5"

Overall Width:?

Diff clearance: ?

Center Chassis clearance:3"

Overall height: ?

Weight: 5lbs RTR

 

[shrek]

here is my first attempt at a scale crawler.

chassis: homemade nn copy red polycarbonate links too
axles: clod locked with shoo goo
esc: tekin rebel
servo: hitec 645mg
center chassis clearence: 4"
wb: 12"
thats all i have for now here is some pics.:roll:

 

[thaclodking]

Scale Hilux:

Steel chassis
TLT axles
Pede tranny
Winch front and rear
Removable exocage
Steel front bumper
Bruiser body
Pede rims
HPI Geolandar tires

 

[maxxdrive]

Truck : Ole Red

Truck Base : Home made

Body: clod buster with homemade toolbox, reciever hitch, mirrors, cowl induction hood

ESC: lrp runner

Motor: 45T Lathe

Servo: Hitec 645 ms

Trans: 1st-stampede 2nd-nitro rustler

Axles: TLT-1.

Springs: Jugg leaf springs

Tires: Moabs.

WB: 11"

Overall Width: Stock axle width

Diff clearance: 1.5"

Center Chassis clearance: 3"

Overall height: 9.5" to top of cab

Weight: ? lbs

 

[NP435]

Here is my Bronco and Cruiser, both bent steel frames, same old TLT BLA BLA BLA
The frame was bent with a torch in a vise

bronco

 

[ColquittCustom405]

Specs:
-79 Nissan Cab
-TLT axles
-Futaba 3306 ESC
-Hitec 5625 Servo
-Integy Shocks
-Pede Trans
-11 3/4" WB
-2 3/4 Belly clearance
-Trail Box
-5.98 pds RTR
-Colquitt Custom Truggy Chassis

 

[madscrambler]

Some of my scale rigs

I sold the black wrangler but am working on a new one. The other is a replica of the spidertrax black widow

 

[madscrambler]

blackwidow

here she is

 

[rcbif]

Truck Base : modified stock tlt chassis
Body:ford bronco
ESC:lpr runner
Motor(s): matrix 55t
Servo(s):hitec standard
Transede
Axles:tlt
Tires:2.2 moab
WB:11.5in
Overall Width:9.75in
Center Chassis clearance:4in
Overall height:11in
Weight:donno

 

[Mello_Yello]

Truck Base : Custom Alum Chassis

Body: 72' C10

ESC: AI Runner plus reverso, waterproof

Motor(s): Integey 45t

Servo(s): Hitec

Trans: pede

Axles:tlt

Tires: 2.2moabs

WB:~~12"

Overall Width:~~10"

Diff clearance:1.5"

Center Chassis clearance:~~4"

Overall height:~~10"

Weight:idk, heavy as hell...

 

[smokinubyrc]

Truck Base : sw2 tlt

Body: jeep rubicon

ESC: novak xrs

Motor(s): Integey 35

Servo(s): Hitec

Trans: pede

Axles:tlt

Tires: 2.2moabs

WB:12"

Overall Width:9"

Diff clearance:1.75"

Center Chassis clearance: 2.75"

Overall height:10"

Weight: 5.5 lbs

 

[roadkill424]

tlt
custom clod body K5
super rooster
AE tranny
custom chassis
swamper tires

better pics soon

 

[geezy0022]

here some mounty pic

mods
esc- novak exv 14.4v
motor- titan monster
bat-two 2400 orion
single speed trany form scale hobbie
4-rc4wd leaf springs
4-rc4wd rear hubs
4-rc4wd rims
swamp dawgs
shocks for a buggy i had
buggy leaf spring set up in rear
dubble shackle in front
full ballbearings
ped shafts

 

[gren2]

Truck Base :stampede

Body:S-10

ESCld futaba

Motor(s):55-turn lathe

Servo(s):futaba s3003

Trans:stampede

Axles:tlt

Tires:masher 2ks

WB:11in

Overall Width:10in

Diff clearance:1.7in

Center Chassis clearance:4.5in

Overall height:10in

Weight:6.5lb:shock:

 

[XB_BOY]

hey guys

heres my pajero with the croc hunter body on it and the trailer behind:

 

[TerribleOne]

Rubicon Buggy

Hulkwerks tube frame
TLT axles, blackfoot stubs
Rc4wd Beadlocks/moabs
Pede trans
45t lathe
Rebel 2
Hitec 645
Lots of lexan panel work
Recaro seat, dash, steering wheel

WB. tad over 12.5
Heavy

 

[TerribleOne]

Leaf Toyota

Bruiser frame
TLT axles
Jugg leafs up front, bruiser out back
Pede trans
Narrowed M2K's
N Pede wheels, with skip rockrings
27t silv can for now
Tundra cab, Bruder bed
MSD Hilift
LRP waterproof esc
Hitec 645

WB. 12.25
WT. 9.5 nice and narrow

Built for the trail