Project Venom: Crawl Space's Wraith Poison Spyder Build

[TheScaleAddict]

o

Red wheel,gray inner ring & raw rings"thumbsup"
Crushers actually work real good, but I will contact Eddie at ci getting foams & possible pit bulls???

One of the best decisions you will ever make. EVER.

 

[Crawl Space]

Red black and silver sounds badass

For some reason I feel like Fiona should be running punisher shafts ;-)

I don't know what foam came with the ripsaws & OMF's (stock foam?) but I'll probably eventually go with CI foams.

 

[TheScaleAddict]

Red black and silver sounds badass

For some reason I feel like Fiona should be running punisher shafts ;-)

I don't know what foam came with the ripsaws & OMF's (stock foam?) but I'll probably eventually go with CI foams.

Maybe. :ror:

I would suggest going with CI foams sooner than later. There is nothing out there that is remotely close to their quality and performance. "thumbsup"

 

[hpiguy]

Man those OMF's are gorgeous! But they sure are proud of them though. I took a long hiatus from crawling and just put a set of RB II's with CI's double deuce foams (6" firm rear ring, medium front ring) on my Wraith, and they're incredible. Boy how things change in 7 years. :lmao:

 

[Crawl Space]

Sorry for the long gap in posts, I've been workin' like a dog and have had barely any time to install stuff, let alone crawl! I do have a serious round of mods going in and the CI double deuce foams are part of that. "thumbsup"

Still working out some sensor issues with the HH revolver, but it's going to be worth it for sure.
It is a frickin' torque monster with a drag brake from hell! I'm definitely going 3s or 4s eventually too :twisted:

It looks so badass that I wish it was more readily viewable with the body on.

 

[der ceej]

what is the brand of steering link you used? i like the beefy look of it. great build!

 

[Crawl Space]

what is the brand of steering link you used? i like the beefy look of it. great build!

Thanks! They are GH racing. Very beefy, but I may swap them eventually for some stainless or titanium links. They are worlds better than stock though!

 

[Crawl Space]

Sorry I have not updated recently. Decided to do the driveshaft mod and got some lower r2j 1/4" SS links installed! Also got the CI DD foams stuffed in those OMF's. I will post more pics and some video when I get my revolver back from Holmes Hobbies (had a sensor issue). I haven't felt like driving it since I put the stock 20t back in

 

[Crawl Space]

The revolver S finally came back in the mail today - I can't wait to install it tonight and try out my new 3s Lipo! I will post some revolver crawling footage soon! "thumbsup"

 

[Crawl Space]

I finally had time to do some crawling with the revolver s - I absolutely love it!! Here is a short crawling video of Project Venom on 2s with 87/20 gearing. I hope to test the same setup on 3s this weekend.

<iframe width="853" height="480" src="//www.youtube.com/embed/Lzddq78dPAQ?rel=0" frameborder="0" allowfullscreen></iframe>

 

[Jsouza1980]

I like your build but even though I don't know you and you don't me... We will forever be bitter enemies until the end. This is my wraith I've just really started to get into. I don't mean to jump in on your thread but your project venom compliments my project LOL

Sent from my iPhone using Tapatalk

 

[Crawl Space]

Ha ha, nice. We should do a Nemesis vs. type thread :mrgreen:

You know what would look sick on the spidey wraith? Red VP method rims with black beadlocks.

Thanks for posting!

 

[TheScaleAddict]

Ha ha, nice. We should do a Nemesis vs. type thread :mrgreen:

You know what would look sick on the spidey wraith? Red VP method rims with black beadlocks.

Thanks for posting!

Tru-Dat

 

[PSCMedia]

Love those Red Methods but I'm biased. They were modeled off my real set on the Spyder JK. "thumbsup"

 

[Hoyta]

That picture is beyond sick!!!

 

[Jsouza1980]

That's a very good idea. Those are nice rims. I just started the project so it bone stock now but those are definitely a consideration. Hopefully after Christmas I can start my own build thread. Ill be keeping an eye on yours for sure


Sent from my iPhone using Tapatalk

 

[Crawl Space]

Thanks brotha, I think I can look past the archenemy thing ;-)

Gonna charge up the 3s and go shoot some more test video tomorrow! I'm tootin' my own horn, but damn are those OMF's are photogenic :mrgreen:

 

[Natedog]

FYI - If you put a lowercase "L" after the imgur link location, right before the ".jpg" it will make your pictures smaller and much more manageable for forum viewing.

So changing "imgur.com/qpQgFi9.jpg" to "imgur.com/qpQgFi9l.jpg" will give you a photo like this:

I like bigger pics than these...big monitor is nice too. Not sure how big the pics were before, but they are kinda small on my big monitor now. Good looking build so far, I was looking at those same VP wheels but I want at least 1" wide...preferable 1.2"...of actual width the way all other beadlock wheel makers are measuring. OMFs and Methods look great though.

 

[Crawl Space]

Thanks Natedog! Yeah, I'm a fidelity guy too, but it's the internet so whatever :roll: All the full res photos are viewable on my imgur account. (personism)

Went to the same spot and tried to shoot the same sort of video on 3s - enjoy...


<iframe width="853" height="480" src="//www.youtube.com/embed/9gBJVz3M1Og?rel=0" frameborder="0" allowfullscreen></iframe>

 

[Natedog]

Sorry I have not updated recently. Decided to do the driveshaft mod and got some lower r2j 1/4" SS links installed! Also got the CI DD foams stuffed in those OMF's. I will post more pics and some video when I get my revolver back from Holmes Hobbies (had a sensor issue). I haven't felt like driving it since I put the stock 20t back in

What are your thoughts on that outrunner and esc setup? Also how you liking the VP wheels...wish they were a little wider.

EDIT: How much of the high frequency noise is the steering servo and how much is the esc/motor?