post your trailers here!!

[Undefined]

Heres the frame to mine so far..just finished the neck yesterday..some more triangulation on the deck then onto axle mounts. Its not scaled to detail to a real 1:1 trailer because I wanted a full upper deck above neck for a 1:24 truck or a few dirtbikes. I'm using 1" redwood slats for the deck.

Trailer is 11.5" wide, deck is 40", and the neck is 8". It will be a triple axle

Sent from my SGH-M919 using Tapatalk

 

[ItsDaKine]

Here's mine

 

[espnstang25]

 

[Fumbles]

Still working on the trailer but here's what I've got so far...
Welded up a rear bumper mount onto Rusty for it.

 

[Mike490]

Here is one I just finished.

http://www.rccrawler.com/forum/scale-accessories/460461-just-another-trailer-build.html

Here it is loaded



http://www.rccrawler.com/forum/scale-accessories/460461-just-another-trailer-build.html

I used 1.55 RC4WD white wagon wheels with 1.55 dirt grabbers. Just under 3" tall tires.

Sent on a crappy sprint network

 

[hotrodsonoma]

Here is my newest one.

http://www.rccrawler.com/forum/scale-accessories/491889-building-new-trailer.html?highlight=trailer

 

[Quiel]

Picked up this trailer from eBay. Had to clean it up a bit. For now she is staying stock.

 

[zonkerd]

my tent trailer

 

[sig_p232]

A couple campers:

Nate

 

[dr frankenstyle]

This one was a bit of a different kind of trailer build. There's a little more about it in my boat thread in the "non-crawler" section.


It's built almost entirely from oak (yep, wood), 6 to 10 coats of lacquer, 1.9 on-road wheels, leaf-springs, locking hitch, brass tongue-jack, working winch, LED and fiber-optic lighting ... the works.



Makes a nice display stand in the "off-season".

 

[W1ck3d0n3]

My first car huller.

 

[rjwalker]

 

[giwerja]

my first trailer build not 100% done yet still some tweaks to be made.

 

[MAC FAB]

....

 

[Darthintel]

 

[maxxdrive]

Sent from my SM-N910V using Tapatalk

 

[Mike Flea]

Lets try this again

 

[colinstuart311]

Here mine

my latest camper trailer

My latest

 

[maxxdrive]

Newest trailer triple axle gooseneck for three rigs.


Sent from my SM-N910V using Tapatalk

 

[Bucko]

Here's a couple I built out of styrene and basswood.