Opinions on Vp cvd's ?

[Pabust]

If you can make them:

- Bulletproof (or almost twice+ as strong as Axial universals)
- Affordable (i happily pay $60 for a bulletproof set and more if it's twice as strong as Axial's)
- Available (Axial universals are very hard to get)

I'm in for a set. "thumbsup"

Also a no slop locker would be schweeet!

 

[comp pro]

how soon before we will be able to pre-order?

 

[Shinjari]

how soon before we will be able to pre-order?

Yeah, want a set so bad!

 

[The Violator]

If your going to go do it, go big. 5-6mm stub. I would gladly drill out a wheel to never have to replace a stub.

 

[Tommy R]

If your going to go do it, go big. 5-6mm stub. I would gladly drill out a wheel to never have to replace a stub.

And no offense to The Violator, but that's a deal breaker for me if the hub diameter is more than 4 mm. Case in point, I love the strength of my Super 300s, but it makes getting suitable hubs (for scalers) a PITA, not to mention I don't like drilling holes in expensive wheels I use on other rigs, as well. Regardless, I don't think that's the failure area anyway so I don't think there's any benefit to the large stub diameter.

My two cents... "thumbsup"

 

[tom@vp]

we are making 4mm and 5mm, and we will see if 6mm is needed.

 

[RCOG]

When do you guys think you might have these available?

 

[tom@vp]

When do you guys think you might have these available?

no release date set just yet, but the first 40 tester sets are to be complete this week.

 

[Harley]

no release date set just yet, but the first 40 tester sets are to be complete this week.

:twisted: great because I only need 35 sets! That still leaves 5 sets for you guys!!

 

[tom@vp]

im going to bust a few up with a vice and vice grips testing the little 3/32 pins ... now ill have none..:lmao:

 

[eric113]

Are these going to be cvd or Universal type ?

I like to see universal. Made for all axial axle lines.

 

[The Violator]

no release date set just yet, but the first 40 tester sets are to be complete this week.

If you want a tester who will give his HONEST opinion, I am sure Steve has my address.

 

[tom@vp]

Are these going to be cvd or Universal type ?

I like to see universal. Made for all axial axle lines.

You will see the universals in the universal thread when we make universals "thumbsup"

 

[Hittman]

no release date set just yet, but the first 40 tester sets are to be complete this week.

I really wouldnt mind testing a set"thumbsup"

 

[im gunna crawl]

Tom does your statement mean that you will be making u-joint front axles? For the whole axial line?

 

[tom@vp]

We have made a very substantial investement in a world class screw machine that enables us to make a whole line of products we have been unable to approach before.

We have commited to make a strong presence in the drive train market and axial has its name written all over it.

 

[blumaro]

We have made a very substantial investement in a world class screw machine that enables us to make a whole line of products we have been unable to approach before.

We have commited to make a strong presence in the drive train market and axial has its name written all over it.

Thats great, constantly breaking cvds, with my 11 turn crawlmaster.

 

[Farmer]

We have made a very substantial investement in a world class screw machine that enables us to make a whole line of products we have been unable to approach before.

We have commited to make a strong presence in the drive train market and axial has its name written all over it.

Then maybe some parts for these dinosaurs:mrgreen:

That would be wonderful in due time.

Later,
Farmer

 

[tom@vp]

Then maybe some parts for these dinosaurs:mrgreen:

That would be wonderful in due time.

Later,
Farmer

I thought everything needed was made

 

[tom@vp]

We are looking for a name one idea we kick around was vpvd's

Give to to a friend