• Welcome to RCCrawler Forums.

    It looks like you're enjoying RCCrawler's Forums but haven't created an account yet. Why not take a minute to register for your own free account now? As a member you get free access to all of our forums and posts plus the ability to post your own messages, communicate directly with other members, and much more. Register now!

    Already a member? Login at the top of this page to stop seeing this message.

New Associated Enduro Crawler - Free-Mods & Upgrades

After Beeftubes, SSD and Treal, now Club5 Racing is working on a pumpkin cover:

73322562_1310339342423204_8390164852630355968_n.jpg


74572520_1310339439089861_4455201736855912448_o.jpg


Source: https://www.facebook.com/club5racingUSA
 
Topher Builds said:
By moving the weight forward and over the front axle it will help on climbs.



Sidehill could be compromised some but TBD.
Click to expand...
This truck becomes more and more interesting as the aftermarket upgrades appear. I'm anxious to see what a 1500 Mah 3s battery would do for the truck in this new battery tray.

Sent from my LM-G710VM using Tapatalk
 
club5 racing is also coming out with front shock hoops with a double-shear panhard mount. I'm waiting for him to finalize his changes.
 
Cesco said:
They really adapted this chassis, they have so many upgrades for it.
Click to expand...

I can't wait to see what he has coming out for the Capra. When I visited he was just getting started on the Capra kit. He's definitely developing for the Enduro though. I see more parts created for the Enduro vs the other trucks he makes parts for.
 
Even further than just Club5 Racing.

The speed with which aftermarket parts for the Enduro are introduced and the amount of vendors that do this. I cannot remember that this happened so quickly with the TRX-4, for example. Very cool to see that all these vendors support Element RC.
 
Cesco said:
Even further than just Club5 Racing.

The speed with which aftermarket parts for the Enduro are introduced and the amount of vendors that do this. I cannot remember that this happened so quickly with the TRX-4, for example. Very cool to see that all these vendors support Element RC.
Click to expand...

I think it's happening even faster with the Capra. Lots of stuff out already and tons on the way. But yeah, I'm loving all these parts coming out in spades.
 
Can somebody confirm which AE aluminum motor mount fits the stealth tranny? I remember there was some talk about one of them being countersunk on the wrong side. TIA
 
punkindrublik said:
Can somebody confirm which AE aluminum motor mount fits the stealth tranny? I remember there was some talk about one of them being countersunk on the wrong side. TIA
Click to expand...



The b5m plates work as well as the old rear motor car plates like the SC10, T4 and B4


Sent from my iPhone using Tapatalk
 
If attaching either of those to the enduro trans with the correct countersunk screws, The blue one is good as the orientation of the motor to input shaft has the countersinks on the correct side. The black one just won’t work as intended.
punkindrublik said:
So I should be safe with either of these? They are two entirely different items due to which side the countersinks are on.
https://www.associatedelectrics.com...ls/91547-ASC91547-ft_milled_motor_plate_blue/

https://www.associatedelectrics.com...2-ASC91602-ft_front_motor_plate_black_3_gear/

Thanks!
Click to expand...
 
punkindrublik said:
Can somebody confirm which AE aluminum motor mount fits the stealth tranny? I remember there was some talk about one of them being countersunk on the wrong side. TIA
Click to expand...
txbart said:
If attaching either of those to the enduro trans with the correct countersunk screws, The blue one is good as the orientation of the motor to input shaft has the countersinks on the correct side. The black one just won’t work as intended.
Click to expand...

EXACTLY why I was askin. Thanks so much!! "thumbsup"
 
Now available on Shapeways by Cesco RC, roll bars for the Sendero body.

CRC1022 Element RC Enduro Sendero Twin Roll Bar v1
https://www.shapeways.com/product/7...o-sendero-twin-roll-bar-v1?optionId=131902733

710x528_29588757_15851351_1573479516.jpg



CRC1023 Element RC Enduro Sendero Twin Roll Bar v2
https://www.shapeways.com/product/L...o-sendero-twin-roll-bar-v2?optionId=130712374

710x528_29513706_15817829_1572904932.jpg


V1 is version with light pod mounting points, V2 is version without them. Thirth single roll bar design is in the making.


The roll bar has a number of functions. Scale looks, rollover protection, and better connection between the cab and bed of the body.
The V1 also offers the option of adding Axial or Injora or simulair style lights.
 
Last edited:
antigacho said:
I wonder if the Treal Brass C-Hub Carrier for Element Enduro 1:10 RC
could be compatible with SSD RC Element Enduro Brass Knuckles?
Click to expand...

I would hope so, they're all using high quality calipers. I'm going to be ordering some to find out since nobody else seems to be bothering with Chubs.
 
You must log in or register to reply here.

Similar threads

JatoTheRipper
Enduro Trail Truck Builder's Kit 3
Replies
14
Views
600
JatoTheRipper
JatoTheRipper
8
No.89 Element VW build
2
Replies
21
Views
811
Gula
Gula
S
Which Element Builders kit?
Replies
7
Views
2K
Stomp
S
T
Utron with some french flavour
Replies
6
Views
224
Gula
Gula
H
Hillbilly's garage
2 3
Replies
48
Views
4K
hillbillyrc
H
Back
Top