Members' Rides - No talking

[Fendbass22]

SCX10 Kit
Old Traxxas TQ3 radio.
Traxxas XL-5
Axial 27T
Old plane servo.

 

[RemeCA]

My first post here because I am totally new to the crawler world. I am going for scale looks for trailing, not for outstanding crawling performance. I bought this original Honcho kit used and have been building it up to be bulletproof for my purposes (hope I'm doing it right!).

Truck Base : SCX10 Honcho kit

ESC: Novak Havoc 3s

Motor(s): Novak Ballistic 18.5T sensored brushless

Servo(s): Losi high torque (only 80 oz/in, getting replaced soon)

Trans: stock housing and gears except for RR one piece hardened outdrives

Axles: stock

Tires: Mudslinger 2.2's

Also has MIP driveshafts, aluminum links, STRC aluminum knuckles and hubs, Proline Comanche body with Honcho rollcage and aluminum bed.

 

[Scocrawler]

My rig:

Stock ax10 chassis

Axial 27t motor

CC Sv2 esc

CC Bec

Solar d772 servo

12.5" wb

Stock width

HB white dot Rovers

Nearly every cheap or free tweak has been done

 

[renezfd]

Newbie here.

Mad Torque

MaxStone 1/8

Other MaxStone 1/8

Mad Crawler

 

[rjwalker]

My project crawler almost done

 

[evan03]

mostly stock wraith
1/8 front buggy shocks extended to 115mm. custom valveing
lower shock mounts flipped over. rear upper flipped over.
turnigy track star 150 esc
turnigy 2100kv 1/8 motor.
gears are 14/56 32p for crawling switch to 20tooth pinion for sand
on 2-3 cell it crawls awesome and 4-6 its foffing fool with paddles.

 

[Workdaddy]

New to this fantastic hobbie...
This is my stock Losi Nightcrawler with the Ford f150 body I trimmed and painted lastnight.
(first body job)

 

[oldcoopdog]

recon wraith

custom shocks

ccbec

hh torque master expert 55t

rc4wd 2 speed

most of the other customs are hidden, kind of a sleeper look.

 

[jp823]

My first crawler/scalers. Put thing Dingo kit together then recently picked up a used Honcho for my daughter.

 

[Olle P]

Data as of today, 2013-07-27.

Truck Base: Losi Comp Crawler

ESC: Castle Mamba Max Pro

Motor: Turnigy TrackStar 17.5T (1870Kv)

Battery: Turnigy NanoTech 4S 1000mAh

Servo: Hitec HS-7954SH, running on 6.0V

Transmission: Stock, with the dig forks removed. 12T pinion.

Axles: All stock rear.
On the front HD worm drive and HD shafts. Aluminium C-hubs with 20 degrees caster angle.

Rims: Vanquish SLW 1, 1" wide, .600 hubs rear and .850 hubs front.

Tires: HB Rover, white.

Foams: CI Double Deuce with narrow inners.
Front 5.25" soft with soft tuning ring.
Rear 5.0" medium with medium tuning ring.

Wheel Base: 315mm

Overall Width: 265mm (front wheels)

Diff clearance: 46mm (front axle)

Center Chassis clearance: 70mm (lowest part of the skid plate)

Overall height: 195mm

Pictures

 

[Jfrisch01]

1 week old (newbie) scale or close to scale as my real jeep. 4 linked, chassis mount servo, axial rear bumper, proline cherokee body, integy steering link and knuckles

Sent from my iPhone using Tapatalk - now Free

 

[rcdude2025]

Truck Base : Redcat Rockslide RS10

ESC: Stock

Receiver: Stock 2.4ghz

Motor(s): Stock 390s (MOA)

Servo(s): Dynamite (Rear), Common Sense (Front)

Axles: Stock

Tires: Stock 2.2 (every other center tread cut out for improved grip)

Wheels: RC4WD 2.2 Steel wheels with RC4WD 12mm mini wheel widener kit

Chassis: Stock chassis with aluminum chassis extensions front and back to imitate scale truck frame

Shocks: Gmade XD Piggyback

Bumpers: Custom built from brass tube

Body: Proline VW Baja Bug

WB: 12 1/2 inches

Overall Width: 11 inches

Center Chassis clearance: 4 inches

Overall height: 10 inches

 

[Noll11]

My scx 10. Still stock body, but I'll be getting a hardbody for it ASAP. Bit of a mishmash of electronics - 2075 servo, ae-2 esc, Hk gt-2 receiver, as-3 tx.


Oh, and this seems to be my 1st post! Been lurking for a while though.

 

[renezfd]

Yes, I'm addicted!!

2 Maxstone
2 Mad Torque
1 Mad Crawler
1 Ridgecrest
1 Losi MRC
1 Maisto

[/URL][/IMG]

[/URL][/IMG]

[/URL][/IMG]

 

[Mike Flea]

Chassis: Axial Ridgecrest

Body: Dodge Raminator (Radio Shack?)

Motor: Integy 35t lathe

Wheels: Axial Rockster

Tires: Proline Super Swampers

Transmission: Stock

Axles: Stock

Front links: Stock

Rear links: Traxxas 102mm

ESC: Stock

Servo: Hi-tec s645mg

Shocks Stock

Phase II, Wroncho:
Chassis: SCX10
Axles: Wraith
Servo: Hi-tec s645mg
Wheels: Axial Rockster
Tires: 2.2 Super Swampers
Front links: 102mm Traxxas
Rear links: 108mm Traxxas
Steering links: STRC
Body: Traxxas SC Dodge
Motor: Integy 35t lathe
Trans: Ridgecrest

 

[arcanecrawler89]

A small look at the 20 plus I have

sent from my 5th scale

 

[CypressCrawler]

Heres mine. Im a complete and total newbie to this side ofbthe hobby and Im hooked. Ive had the Deadbolt just over a week. I have wheel weights, Gmade 2.2 Mudrocks and Hotbodies Rovers and a 14T pinion gear on its way.

 

[THE Creeper]

Creeper
Motor: 55t Integy
ESC : Axial ax2/with brake
Battery: lipo 2cell
Receiver : Axial AX3
Servo: HI TECH
Shocks: Wraith shocks, relocated position
Tires: awaiting arrival, RC4WD tires
Condition: ready to creep

 

[Bigblackjk91]

This is my slick rock I just picked up today. Built the light bar and doing all aluminium sheeting for body panels

Sent from my iPhone using Tapatalk

 

[THX_138]

A lot of members image links go dead resulting in the post being removed. If you have images hosted through an outside website and move it in your outside image account or delete it from your outside image account.. It in turn makes any images you have posted here gone and will result in your post being deleted.


A refresher of the Members Ride thread guidelines...

It's time to post up your rides and keep them all in one spot so others can view them and help give ideas.DO NOT post pictures of projects torn in pieces,they need to be driving and in one piece.Have at least one picture with the body on and not a bunch of chassis shots.Only post up 1-2 pics and answer the following questions( if you guys want to add another question,LMK ) if there is more than the 1-2 pics and the info requested, it will be deleted. Pics that DO NOT work( due to the host), will also be deleted.If you see something in the pics and want more info, please PM that person and ask. This will keep all the BSing to a minimum.

answer the following ( copy and paste if ya want)

Truck Base :

ESC:

Motor(s):

Servo(s):

Trans:

Axles:

Tires:

WB:

Overall Width:

Diff clearance:

Center Chassis clearance:

Overall height: