Members' Rides - No talking

[heyisTi]

Honcho RTR /upgrade link & 2.2 tire/ waterproof

Gmade R1/ Traxxas electronic & Suspension / 27t motor

This one is a mix of Venom Creeper trans & axel / redcat rs10 suspension / axial chassis & link (not complete)

Just finish this one earlier today, it take me awhile to figure how to mount the honcho roll cage on the RC4WD Trail Stomper RTR & the tundra cap. It fit very nicely.

 

[rockin86runner]

here is my project based off the honcho as of now going to use the frame and get yota axles under her swap over to springs try my best to make it look like my 1:1

all stock axial trany, motor, axles, home made links custom shock mounts

 

[asian195]

Xr10 stock mostly

novak m2 esc
Hobico cs170
45t brood motors
Hb rovers white dot
Vp slw
3s lipo
Bent links and losi gold front losi white rear springs now.




Sent from my uber smart, smart phone....

 

[Hyde802]

Little late night snow run. My shocks were wicked stiff when I was done, the oil didnt like the -4 tempature.

Same crawler, different body

Trimmed the Madcrawler 10 "hummer" body to fit my Maxstone 16.

:mrgreen:

Hope everyone had a good Holiday season!

 

[mikro383]

Here's mine
LCC mamba max pro, tekin redline17.5
Honcho currently Traxxas vxl
Losi Mini stock with freebie mods and wheels

 

[Soulo747]

SCX10 and Micro Trekker

Both stock except for some cosmentic upgrades to the trekker (just got both this week, SCX10 today. Lots to do, lots to do!)


Uploaded with ImageShack.us

...like starting the replica of my 1:1 XJ...


Uploaded with ImageShack.us

Wraith

Vanquish knuckles, STRC hubs, Aluminum links (after this pic was taken), Savox SC-1256, G-Made G-Transition internal spring shocks, Titus 2.2 Beadlocks, Proline Swampers, Deans plugs all around.


Uploaded with ImageShack.us

Micro Crawler Bronco

HR internal spring shocks (with no springs) RC4WD Beadlocks, Mickey Thompson Baja Claws, Lots of custom styrene work, custom lightbar from an Advanced Autoparts led pocket light and some styrene and paint)


Uploaded with ImageShack.us

The family -

Micro DT - (full brushless and lipo, carbon fiber chassis, completely decked out, i dont think anything on it is stock at this point).

Mini Revo - (RPM upper and lower/front and back, integy wheels, aluminum steering post.... and... a bunch of other sh*t i cant remember cause i havent worked on it or driven it in ages.. im obsessed with crawling)

Micro Rally - STOCK


Uploaded with ImageShack.us

 

[smitty808]

Truck Base : Redcat Rockslide RS10

ESC:Stock

Motor(s): Bane Bots 395s

Servo(s): Ebay Chinese MG995

Trans: Stock(metal gears are in the mail)

Axles: Stock

Tires: White dot Rovers

WB: 11 3/4

Overall Width: 11

Diff clearance: 2 1/4

Center Chassis clearance: 4

Overall height: 12

 

[Rummie]

My first 1.5

Sorry for the crap cell phone pic

 

[OKJeepin]

My Comp Crawlers.

Losi MRC Pro
T1E XR10 Moonbuggy
AX10 Gatekeeper

 

[Knarly Nerd]

Crappy cell phone pics of my Beetlejuice Berg. Just need to swap motors and get some wheel weights.

 

[matt115k]

here is a pic of my venom creeper with integy 2.2 roll cage and home made body panels

here is a wheel when i took the picture above i was waiting on the beadlock paint to dry lol

 

[JParr90]

Still mostly stock except for cosmetic stuff.
Axial scx 10
RC4WD IROK 1.9's
RC4WD OEM steel black wheels
Pro-Line Jeep Cherokee body with Traxxas Summit fender flares

 

[slowrey]

my rides

 

[Hunter711]

BWD Mantis:

 

[Shadow Fox]

Truck Base : SCX-10

Body: 2003 Chevrolet 2500 hard body.Came off a 1/12 scale Dale Earnhardt R/C

ESC: Tekin FXR

Motor(s):Tekin35t

Servo(s): Traxxas 2075, upgrading to Hitec 645mg

Trans: Axial SCX10

Axles:Axial SCX-10

Tires: TSL Super Swampers

WB: 12-1/2''

Overall Width: 9-1/4''

Diff clearance: 1-1/4''

Center Chassis clearance: 2-3/4''

Overall height: 8-1/2''

 

[pastirolli]

AX10
Castle SCT, 55T, 1350mah 3s, china-bec, china-servo.

Losi Micro

Tamiya Midnight Pumpkin QD
2500mah nimh, ansmann esc, acoms-servo, 27mhz.

 

[Timbulb]

My SCX10 as it runs...

Custom 4 link front and back
Tekin FX-R, 20T Axial 84/23
1.9 Crazy Krawlers
Wilfort Industries bumper lift
All the goodies Plasti-Dipped®

 

[evil_monkey]

My first crawled (really RC)

Redcat rs10 with a few mods, tires, foam work, wheel weights and paint.
New CKRC 208 oz. servo with aluminum arm

 

[FreedomRiding]

FREEDOM RIDING Team

 

[BdoubleD]

My venom creeper with rmdw xrv2 chassis