FLYSKY which one

[RCKELLEY]

I have an Element Trailwalker black that I am upgrading to Fusion SE 1800KV. From what I understand the stock radio will not allow me to get the most potential out of this Fusion SE. I want a radio that will complement the Fusion and get the most performance.


So, what is the best FLYSKY radio for me: GTB3 or GT5 or G7P?

 

[RCKELLEY]

I decided to go with a Fusion SE 1800KV. Less mess to mount and wire. Plus, this Fusion KV motors seem to be the motors to have. Only issue I will have to figure out is if the stock motor screws fit the Fusion. And as far as the radio I think the FLYSKY GP7 is the latest version of these radios. So I will go with that. I like the Nobel as well...

 

[hnoroian]

You need 3x6mm low profile, 8mm are too long.

 

[RCKELLEY]

You need 3x6mm low profile, 8mm are too long.

Okay, thanks for the recommendation.

 

[pwjm]

I have a GT5 and it's been pretty good. The steering pot got dirt in it and I thought I had a failed servo, but a quick blast of air and WD-40 and it was good again.

I'd consider the radiolink radios as well. They're more or less the same I've heard but use switches instead of potentiometer dials for the 3,4,5 channels.

 

[89Industries]

I have a GT5 and it's been pretty good. The steering pot got dirt in it and I thought I had a failed servo, but a quick blast of air and WD-40 and it was good again.

I'd consider the radiolink radios as well. They're more or less the same I've heard but use switches instead of potentiometer dials for the 3,4,5 channels.

The dumbo rc ddf-350 is pretty much a modernized radiolink. Lots of buttons and knobs. Same parent company but rx aren't cross compatible. Ddf-350 only has 10 model memory compared to radio link 20 or 30 model memory.

I have both of these. Both good but not able to compare to flysky or futaba, etc

 

[pwjm]

The dumbo rc ddf-350 is pretty much a modernized radiolink. Lots of buttons and knobs. Same parent company but rx aren't cross compatible. Ddf-350 only has 10 model memory compared to radio link 20 or 30 model memory.

I have both of these. Both good but not able to compare to flysky or futaba, etc

Oh wow, yeah that Dumbo RC controller is really good value for a 10ch remote. Not huge on the screens myself, but it's fancy for sure.

 

[89Industries]

I find the screen on the remote a lot better to set end points and other stuff than knobs or weird sequences of button pushing to do that stuff. Maybe some of the nicer high end stuff can be plugged into a computer and programmed or via your phone, etc but I am not that fancy.