Mr.JayDeeM
Quarry Creeper
Aye fellas!
I heard about a hobby shop that was about 2 hours away and it supposedly a big hobby shop with out door track and what not. So, I went. Sure enough it was decent shop. I came across this truck made by Electrixrc and Ruckus is the model of the truck, I said to myself, $129.00 with spektrum 2.4ghz radio and a sr200 rx is not a bad deal. I gave it a thought and figured to buy it for bashing around and have a little fun with it.
It's a 2wd RTR with a stock 20T motor and 18 motor pinion. it's not too bad. It also comes with 1800 Mah battery which don't last long at all. lol. thinking about getting a battery around the 5000Mah area. The transmission is open diffs, I'm thinking about locking them if its possible. Any suggestions?
The 1st thing I did to the truck was ditch the huge monster truck wheels and tires in favor or 2.2 wheels from losi and unknown tires I had laying around with firm foam. besides who wouldn't want a bead lock wheels on a fast truck? Lock your tires down instead of gluing! Then, I ditched the thin oil that was in the shocks for Losi 40wt all around, that seem to help the damping and the rebound. i ordered a 15t motor and 19t motor pinion for shits and giggles before I go with brushless set up.
Is there an forum for 2wd trucks/buggy? I know this is a fairly new company and there is not aftermarket support for it yet.
Oh, and the body gotta go soon. lol.
I would need some advice about a brushless set up. Is 3800kv would do the job? I'm not sure if it's 2 or 4 pole. But heres the company offer them in and was wondering if its worth the buy.
Fuze 1/10 3800Kv ESC/MotorCombo (DYN3754C): ECX RC
Anyway, heres are some pics....
Aftering bashing around and fine tune the suspension, I think I got it all dialed in for now. It stopped bottoming out when taking a hard landing from jumps. the rear is a little stiffer and the front is a tad softer. I also changed the body as well.
I heard about a hobby shop that was about 2 hours away and it supposedly a big hobby shop with out door track and what not. So, I went. Sure enough it was decent shop. I came across this truck made by Electrixrc and Ruckus is the model of the truck, I said to myself, $129.00 with spektrum 2.4ghz radio and a sr200 rx is not a bad deal. I gave it a thought and figured to buy it for bashing around and have a little fun with it.
It's a 2wd RTR with a stock 20T motor and 18 motor pinion. it's not too bad. It also comes with 1800 Mah battery which don't last long at all. lol. thinking about getting a battery around the 5000Mah area. The transmission is open diffs, I'm thinking about locking them if its possible. Any suggestions?
The 1st thing I did to the truck was ditch the huge monster truck wheels and tires in favor or 2.2 wheels from losi and unknown tires I had laying around with firm foam. besides who wouldn't want a bead lock wheels on a fast truck? Lock your tires down instead of gluing! Then, I ditched the thin oil that was in the shocks for Losi 40wt all around, that seem to help the damping and the rebound. i ordered a 15t motor and 19t motor pinion for shits and giggles before I go with brushless set up.
Is there an forum for 2wd trucks/buggy? I know this is a fairly new company and there is not aftermarket support for it yet.
Oh, and the body gotta go soon. lol.
I would need some advice about a brushless set up. Is 3800kv would do the job? I'm not sure if it's 2 or 4 pole. But heres the company offer them in and was wondering if its worth the buy.
Fuze 1/10 3800Kv ESC/MotorCombo (DYN3754C): ECX RC
Anyway, heres are some pics....
Aftering bashing around and fine tune the suspension, I think I got it all dialed in for now. It stopped bottoming out when taking a hard landing from jumps. the rear is a little stiffer and the front is a tad softer. I also changed the body as well.
Last edited:
