• Welcome to RCCrawler Forums.

    It looks like you're enjoying RCCrawler's Forums but haven't created an account yet. Why not take a minute to register for your own free account now? As a member you get free access to all of our forums and posts plus the ability to post your own messages, communicate directly with other members, and much more. Register now!

    Already a member? Login at the top of this page to stop seeing this message.

Choosing a motor and ESC for your Wraith - Gearing Added!

Re: Choosing a motor and ESC for your Wraith

Mamba max pro SCT edition 2400kv. Thought it would be perfect but the motor is too long and hits the lower rear link connection on the skid. Damn!
 
Re: Choosing a motor and ESC for your Wraith

Has anybody used the dual motor mount plate and used two motors? If so wat did you use? also what is the best motor esc for water crawling needs to be water proof. want faster than stock and enough torque for crawling. What do u recommend ?
 
Re: Choosing a motor and ESC for your Wraith

How bout the Venom 540 55T Brushed+60A Waterproof ESC Crawler Combo VNR13022

please help
 
That venom ESC may be ok, but it has a very weak internal BEC. 5v at 1amp isn't going to push much of a servo. Plus it doesnt say it has a Lipo Low voltage cut off. It jus says 5volt low voltage cut off.. 5 volts is way to low for a 2s lipo.
The 55t motor is gonna be slower a snail going up hill..
About walking speed is all you'll get out of it.. If your into crawling only it will be fine.. But as soon as you drive off the rock pile you'll be constantly wanting more speed.


Sent from my highly abused iPhone using Tapatalk
 
Re: Choosing a motor and ESC for your Wraith

Holmes Hobbies came through again. I ordered a custom motor and XBRL about a week ago and I already got an email that its ready and shipping.

Thank you. Now I can get my Wraith off the shelf again.

Thank you Harley for all the help and suggestions
 
Re: Choosing a motor and ESC for your Wraith

Ok I was wondering what you all thought about a tekin fxr esc with the pro heavy duty 35T motor. Will that motor do ok under water? Is stock gearing ok?
 
Re: Choosing a motor and ESC for your Wraith

I use a tekin 13.5t redline sensored brushless motor with a RS-Pro esc. I absolute love the combo and it works great for crawling and speedy runs.
 
Re: Choosing a motor and ESC for your Wraith

Does anybody have any suggestions on what kind of wires I need for my HH Crawlmaster? Does anybody have pictures on where I need to solder the wires so I don't mess this up.

Does anybody have any suggestions on my BRXL wires before I solder my dean connectors? Do I need to extend my wires or keep the length as it is?
 
Quiel said:
Does anybody have any suggestions on what kind of wires I need for my HH Crawlmaster? Does anybody have pictures on where I need to solder the wires so I don't mess this up.

Does anybody have any suggestions on my BRXL wires before I solder my dean connectors? Do I need to extend my wires or keep the length as it is?
Click to expand...

12 gauge noodle wire.

Where is very straight forward. There are large square areas on each side.

Mock everything up where it goes and see if the wires reach. Don't over complicate it.
 
Re: Choosing a motor and ESC for your Wraith

Harley said:
12 gauge noodle wire.

Where is very straight forward. There are large square areas on each side.

Mock everything up where it goes and see if the wires reach. Don't over complicate it.
Click to expand...

There are 4 square area on top. 2 on each side of the red and black what looks like a capacitor. One of the square has what it looks like a coil attached to it and one end has either the red or black capacitor.
 
Re: Choosing a motor and ESC for your Wraith

Harley
What do you think of a venom fireball 21d motor? Thanks for your info ahead of time. 8)
 
How's the build going so far, waiting for more stuff to come in? Roughly, what's your battery choice besides Gen Ace batteries. Hard to find in stock. Looking for high C rating but packed into a small sealed hard case. Any suggestions would be greatly appreciated. 3&2s batteries.
 
You must log in or register to reply here.

Similar threads

D
esc motor question
Replies
6
Views
873
cul8tr
C
E
Integrating eFPGA into My Rock Crawler ESC Setup
Replies
0
Views
447
eric12368
E
R
Choosing a platform for my first RECON G6
2
Replies
23
Views
2K
Reezo
R
T
Wratih Spawn 5K Kit Build The Last NIB Wraith Kit?
Replies
13
Views
2K
Goro Majima
G
OSRC
Ringing in 2025 with a........... TLT build?
Replies
9
Views
446
OSRC
OSRC
Back
Top