CC01/XC picture archive - no talking

[JS412]

 

[cc01lover/97/]

pajero

Did a little update..."thumbsup"

:mrgreen::mrgreen::mrgreen::mrgreen::mrgreen::mrgreen::mrgreen::mrgreen::mrgreen::mrgreen::mrgreen::mrgreen::mrgreen::mrgreen::mrgreen::mrgreen::mrgreen::mrgreen::mrgreen::mrgreen::mrgreen::mrgreen:"thumbsup":mrgreen::mrgreen::mrgreen::mrgreen::mrgreen::mrgreen::mrgreen:

 

[vtt]

 

[shanks]

 

[Digger]

Here's a few of my Hx. It has been changed a little since these pics were taken, but I haven't taken more since the changes...

Specs in the pics:
Chassis: Tamiya CC01/XC
Body: Fastlane RC 1/10 Hummer Hx
Rims/tires: Axial SCX-10 beadlocks/Proline 1.9 Flatirons
Other: Proline roof rack and tools, RPM lightbar with custom mount, Traxxas Slash front bumper with working winch, Working headlights and tail lights, Full waterproof electronics(Traxxas XL5, 2056 servo, w/p radio receiver case), 55turn motor, custom 4 link rear with GPM rear axle mount.

Since these pics I have added some more decals and swapped out the flatirons for 1.9 TSL/SX Swampers from Proline. Still a work in progress.

 

[FJ40Steve]

My CC-01 FJ40 & 1:1 FJ40

This is my first post. I have a full sized FJ40 and have built a CC-01 FJ40 to match it. It is a work in progress and is my 1st RC truck. I have made some skid plates out of sheet aluminum for it.
http://i1220.photobucket.com/albums/dd444/SSyzdek/RCFJ40IMG_0003.jpg
http://i1220.photobucket.com/albums/dd444/SSyzdek/RCFJ40IMG_0002.jpg
http://i1220.photobucket.com/albums/dd444/SSyzdek/RCFJ40IMG_0001.jpg
http://i1220.photobucket.com/albums/dd444/SSyzdek/FJ40.jpg
My 1:1 1979 FJ40

 

[FJ40Steve]

My CC-01 FJ40 & 1:1 FJ40

This is my first post. I have a full sized FJ40 and have built a CC-01 FJ40 to match it. It is a work in progress and is my 1st RC truck. I have made some skid plates out of sheet aluminum for it.

My 1:1 1979 FJ40

 

[Kuba93]

This is my second CC - Land Rover Discovery III

Thread of this build > http://www.rccrawler.com/forum/showthread.php?t=306155

Motor - Integy 65T
ESC - Tamiya TEU 101 BK
Baterry - 2S Turnigy Hard Case Lipo 4000mAh
Steering servo - Hitec 645MG
Tires - Team Losi Mini Rock Bashers
Rims - Tamiya Porsche Carrera GT ( :ror: )
Shocks - Stock Tamiya oil filled..
4link, skid plate, shock holders, body mounts - homemade..

All fotos of this build http://kubamynar.rajce.idnes.cz/Land..._Tamiya_CC-01/

 

[JS412]

:mrgreen:

 

[tlt-1]

hi
this is my tamiya cc-01 from israel! "thumbsup"
http://s804.photobucket.com/albums/yy327/tomeriki1/spar parts/tamiya cc-01 custom body jeep crawler/

 

[pardonmyn00b]

http://www.rccrawler.com/forum/showthread.php?t=295683

 

[Mckilroy]

Here is my restored Isuzu Mu, this photos are from my last vacation in south france (Cap Canaille)

If you want, you can take a look at my restored-report in the german-crawler-forum.

Greetings,
Matze

 

[seabeejeep]

 

[revo_d]

This is my cc01, standard motor and esc, savox high tourque servo and dsm 2.4, i have cut the front brick off, but i can still put the bar on.

Cheers,
Revo

 

[msmith0322]

 

[2forty3]

 

[prosavage]

cc01 in the lead :mrgreen:

 

[offacup]

My first CC01 LandCruiser 40:

-cutoff front brick w/ custom skid
-shaved front arms for more droop
-gearcase mod
-homemade 4-link rear
-stock shocks up front/ SCX10 in the rear
-Integy 65T
-GD-600 GRU (not installed yet)
-TEU-104BK ESC
-RC4WD hi-Torque servo
-RC4WD OEM steelies beadlocks (two rearsides put together)
-Dick Cepek Mud Country tires

 

[offacup]

My Second CC01 (got in a trade):

-front brick cutoff (still gotta make skid)
-shaved front arms
-stock shocks up front/ 90mm scale shocks rear
-custom rear 4-link
-Terra Claw 55T
-TEU-104BK ESC
-Traxxas waterproof servo
-Flat Irons on Axial beadlocks
-Humvee body (I know I gotta lower it a bit)

 

[xxCARLSONxx]

My Pajero

Haven't had a chance to take her out yet with the new stuff. Btw, that's a badass Humvee.