• Welcome to RCCrawler Forums.

    It looks like you're enjoying RCCrawler's Forums but haven't created an account yet. Why not take a minute to register for your own free account now? As a member you get free access to all of our forums and posts plus the ability to post your own messages, communicate directly with other members, and much more. Register now!

    Already a member? Login at the top of this page to stop seeing this message.

B-MOW's SCX10 III JT Gladiator Trail Warrior

Great looking rig! I'm starting to feel nostalgia for these Axial Jeeps of any gen and type...

Who makes the VFD skid for this chassis? It would be very interesting to compare the weight of the two trans. The VFD COG is definitely going to be lower though simply because of the motor location.
 
sweet pictures, sweet looking rig that. Looks like it was a great place for a day out (y)
Thanks. It’s a fun place for sure.

Nice looking rig. Kinda makes me miss the one I had.
Thanks. I’m glad I kept this one. It’s more enjoyable to drive than my JLU.

Same here man… I enjoyed mine quite a bit for the short time I had it.

Looks fantastic as usual Brian
Thanks Tom!

Great looking rig! I'm starting to feel nostalgia for these Axial Jeeps of any gen and type...

Who makes the VFD skid for this chassis? It would be very interesting to compare the weight of the two trans. The VFD COG is definitely going to be lower though simply because of the motor location.
Thanks! Harley has a 3D print adapter that uses the stock Axial skid for the VFD. I may though try to shoehorn the VP skid in there if the link mounts line up.

I’ll weigh both and report back when the swap does happen.
 
Love this thread and build, I cannot believe I had missed it. Thanks @VoltSCX for bringing it up. Rig looks amazing, 10/10! I am still working on mine.

I was considering tinting the windows, as well, but - don't laugh! - do the stickers go on the INSIDE or OUTSIDE? I see you! You are laughing. Me noob ;)

Also love that you have highlighted the grooves in the doors etc. - did you use vinyl or a simple marker? I wanted to do the same and have both at hand but the vinyl approach is going to be way more time consuming than a 0.2 mm marker.
 
Last edited:
Love this thread and build, I cannot believe I had missed it. Thanks @VoltSCX for bringing it up. Rig looks amazing, 10/10! I am still working on mine.

I was considering tinting the windows, as well, but - don't laugh! - do the stickers go on the INSIDE or OUTSIDE? I see you! You are laughing. Me noob ;)

Also love that you have highlighted the grooves in the doors etc. - did you use vinyl or a simple marker? I wanted to do the same and have both at hand but the vinyl approach is going to be way more time consuming than a 0.2 mm marker.

Thank you!✌️ It was a fun build and even more funner to drive!😁

I used an ultra fine point Sharpie permanent marker on the door and hood grooves. Just requires a steady hand.

Lol, it's been a while but I've definetely asked myself that question in the past as well. They go on the outside.
👍
 
used an ultra fine point Sharpie permanent marker on the door and hood grooves. Just requires a steady hand.

Makes sense, that's how I like to do it, as well. I've seen people use tiny vinyl strips but 1) I don't have a way to cut them that precise at the moment (dull xactos 😆) and 2) it's a lot of work and the curves don't come up always nice, 3) it is not flat and sometimes looks a bit weird, even if it's very thin, and 4) it's harder to remove than a simple wipe of hand sanitizer and some cotton, and 5) it risks coming off if you get branches and generally nasty trail things. Which we do because we bada$$ ;)

So marker for the win! Steady hand is not that important with the grooves guiding you and with some cars not having very uniform tolerances 😆

If you do a Tesla you need to ask a 2-yo to hold the marker 😆
 
Back
Top