• Welcome to RCCrawler Forums.

    It looks like you're enjoying RCCrawler's Forums but haven't created an account yet. Why not take a minute to register for your own free account now? As a member you get free access to all of our forums and posts plus the ability to post your own messages, communicate directly with other members, and much more. Register now!

    Already a member? Login at the top of this page to stop seeing this message.

AnimalHippie's Trx-4 Adventure

Thank you to my awesome wife for my amazing birthday dinner & appetizers! Also for my RC goodies :-)

Steamed muscles, bread & bruschetta
e9298aab3114e818714eebe8efe91860.jpg

Chicken cordin bleu casserole
c0603bb09015329122a0521f669b4cdd.jpg


Sent from my SM-S975L using Tapatalk
 
Last edited:
I talked to Jon from promodeler yesterday. What a great dude he is. The 470 is still on backorder till the first week of August. By then I should have the funds to grab one. I can't wait! Going to spend some time getting my windows finished & doing some fender & fender flare mods in the next day or so. Maybe I can get a garage pass today since it is my b-day. :-) hope everyone has a great day!
 
Last night I had some tinker time in the garage. Found out how much fun it is to mount a tire on a beadlock :-) first one so it was interesting, but I figured it out without YouTube. I was curious to see how difficult it would be to swap tires. Found a little corrosion on the inside of the rim. Used my dremel with a wire wheel to clean that off. Didn't come out visually perfect, but it did smooth out all the ruff areas. Also E6000 all my fender flares to the body Again. Since I had a few flappers. Did some sanding around the windows to get the ruff areas knocked back from cutting. Thanks to Zohn for the suggestion. Used a piece of aluminum tube I had left over from making spacers for my rock sliders & super glued a small bolt into it. I Made this handy little tool for the tiny hex head bolts on the lock ring on the beadlocks.
278a4315e81bb550b627edf9338764d9.jpg
Edit cause I'm a total noob.... that's not the correct way to install tires on these beadlocks definitely unscrew the 6 center bolts to split the rim in half. I did it the hard way the first time. Learn from my mistakes!
c78e84b60a2dd72e3999fa6deec51cc6.jpg


Sent from my SM-S975L using Tapatalk
 
Last edited:
Working on the windows a bit. Have everything cut. Hopefully can grab some window tint & paint from the LHS. Going to paint my roof at sometime in the near future. Also working a 5 gate comparison crawl video. Cut Canyon Trail vs RC4WD Iroks vs Proline Hyrax. Will also be comparing no axle weight vs CODYBOY weights. Should be a good video if I can ever get it done :-) hope everyone has a great day!
 
carpetfuzz17 said:
That is a very nice little setup you have going on in the backyard.
Click to expand...

Thank you my friend! I've been building it since before I even had my Trx-4. Building the course is almost as fun as building & running your rig. I still have some stuff I'd like to do to it. Just haven't acquired the materials yet. Looking for a 18"-24" diameter section of corrugated drain pipe & some 1:1 mud tires that still have some good tread right now. Only thing I have paid for on that course is the screws. I will be doing a course tour & my Trx overview video some time soon.
 
Last edited:
AnimalHippie said:
Thank you my friend! I've been building it since before I even had my Trx-4. Building the course is almost as fun as building & running your rig. I still have some stuff I'd like to do to it. Just haven't acquired the materials yet. Looking for a 18"-24" diameter section of corrugated drain pipe & some 1:1 mud tires that still have some good tread right now. Only thing I have paid for on that course is the screws. I will be doing a course tour & my Trx overview video some time soon.
Click to expand...

You are very welcome. It also provides that extra family time for you and your daughters by the looks of it. Can't go wrong there.
It's great to source everything free and build what you want. I have been using the large tree roots in my backyard and started collecting rock from the local creeks. Up next is to hit up the tree service guys for some free mulch.
Keep up the good work "thumbsup"
 
carpetfuzz17 said:
You are very welcome. It also provides that extra family time for you and your daughters by the looks of it. Can't go wrong there.
It's great to source everything free and build what you want. I have been using the large tree roots in my backyard and started collecting rock from the local creeks. Up next is to hit up the tree service guys for some free mulch.
Keep up the good work "thumbsup"
Click to expand...

The girls love the truck. The wife even likes to run it. The girls are always out there with me. They like to add loose rocks all over the place & take any clay they find for "recipes".:mrgreen: They're all gonna go with me next weekend for a local comp.
It will be my first run with other rigs. I'm stoked! Don't have much for scale points. So I don't see myself placing, but I'll Damn sure give them a run on the rocks!

Look forward to seeing some pics of your course. Watch the mulch. Brings allot of bugs, deteriorates fairly quick & very loose. Might be better asking for some logs. But that's up to you
 
Finally put the Hyrax on my rig today. They crawl extremely good. Whatever foam Ernie put in those tires sure made a difference in the tire squat & the side hill. Thank you again Ernie! Getting everything together for my first comp this Sunday. Just a few odds and ends left before I'm ready to ride. Pics of both tires. Rc4wd irok & Hyrax.
bc837b899e15a7cc8760f2468b5c4f45.jpg
888b68de5e3c1697cbb2c7262885437c.jpg
3c6a3b485dca0501273e74d8042e54f0.jpg
ea8a7955f57260c4ac96a0ed8ce9fdcd.jpg
97518de3db2b615ee74267b9859b91e6.jpg
15703455479a9377aab76d403068b8c5.jpg
d68220c2696f1ee91ba7c01aa188ff85.jpg
888e2777917fedfd9c447d66e3413fd2.jpg
c2fefbd157be0f81830e9a22b8ba2072.jpg


Sent from my SM-S975L using Tapatalk
 
Hyrax are awesome. Your going to like them. They have good grip and good wear. They are my favorite tire so far.


Sent from my iPad using Tapatalk
 
Good luck at the comp Justin, and hope the new tires and foam help you out a little. I made a little larger outer foam to fill them more than the other tires. "thumbsup"
Ernie
 
Hey Animal, are you using the proline 2 stage foams? I had my Hyrax mounted with single stage foams and thought they were a little soft ( tires collapsed too easy) Got the 2 stage foams and couldn't believe the difference.
 
CODYBOY said:
Good luck at the comp Justin, and hope the new tires and foam help you out a little. I made a little larger outer foam to fill them more than the other tires. "thumbsup"
Ernie
Click to expand...
Thank you brotha! Wanna help me with the foam question? Are they CODYBOY designs foams?

Sent from my SM-S975L using Tapatalk
 
penguin1 said:
Hey Animal, are you using the proline 2 stage foams? I had my Hyrax mounted with single stage foams and thought they were a little soft ( tires collapsed too easy) Got the 2 stage foams and couldn't believe the difference.
Click to expand...

They are 2 stage. Not sure what brand. Think Ernie might have made them. Only got to run for a few mins after I got the tires on the rims. Mosquitoes were trying to carry me off. They seem to crawl allot better then the Irok. Are you gonna make it this Sunday or you outta town still?
 
penguin1 said:
Hey Animal, are you using the proline 2 stage foams? I had my Hyrax mounted with single stage foams and thought they were a little soft ( tires collapsed too easy) Got the 2 stage foams and couldn't believe the difference.
Click to expand...


They are a 2 stage foam with a closed cell in the center. I make them on my drill press, lathe and router. I've been doing my own foams since my comp crawler days. "thumbsup"
 
I keep wanting to call your rig "Mosquito Masher" lol. Good luck at the upcoming comp! As a guy that hasn't yet been to an event, I'll be interested to see what you have to say about it.
 
high plains drifter said:
I keep wanting to call your rig "Mosquito Masher" lol. Good luck at the upcoming comp! As a guy that hasn't yet been to an event, I'll be interested to see what you have to say about it.
Click to expand...

Thank you sir! I think I'll do alright in it. We shall see. I'll definitely give you my 2 cents on the comp. I'm extremely excited! Think the wife & the girls are going to come hang with me. Maybe I can talk the wife into videoing some of my run. That's a great name! Lmao! If I ever see that I've ran one over you'll be the first person I send the pic to. LoL! Mosquitos are crazy here bro! A couple times in my cave crawl video you can hear the little bastards. There's at least 20 of them that make an appearance in that video LoL! I'm not gonna let bugs or temperature stop me from having a good time. Spray down with a bunch of essential oils, drink some water & go have fun! Kinda sucks wearing pants & long sleeves in 90° weather to go run, but to me it's worth it.

Sent from my SM-S975L using Tapatalk
 
You must log in or register to reply here.

Similar threads

OSRC
Workbench - Take Two
Replies
18
Views
2K
eddievedder
eddievedder
Greatscott
GreatScott's Radiomaster MT12
Replies
19
Views
2K
Greatscott
Greatscott
D
Trying to use non Traxxas Batteries for TRX 4 Sport
Replies
6
Views
2K
twade984
twade984
T
Wratih Spawn 5K Kit Build The Last NIB Wraith Kit?
Replies
13
Views
2K
Goro Majima
G
T
Direct power servo issue
Replies
11
Views
2K
tigris99
T
Back
Top