All Arizona Crawlers Post Up...

[jamesdicken]

i live in gilbert

i have a ax-10 2.2

its mostly stock except the shocks and rear links.

its four linked and i moved everything around to get a better cog. of course got the saddle pac bat .added some weight to the wheels cut the foams moved the lower links inboard cut up the bat tray and moved it down. you know the usual.

i mess around near my house and every where i go. i am gunna try to get to more P.A.R.C. comps. i went to the last one in dec and it was cool so see you there.


edit:every thing above is a lie.my baby is built

 

[xaruum]

Hey all,

Just getting back to the hobby again. Live in Mesa.

12" - tlt axles, stampede tranny, single vertical plate chassis, 4ws
16" - clod axles, custom chassis/susp, 4ws
18" - xf axles, custom trans, custom chassis/susp, 4ws

Backyard Crawling for a while now.

 

[RJD4CARS]

Hi,

Prescott, Yavapai

2.2s

SW2
Axial Beadlocks
Masher 2000 M3 Tires
Integy 55t
Pede Tranny
Droop suspension
Modified T maxx shocks
Aluminium Knuckles
Hitec 5645 Servo
Moped Esc (it won't die!)
DX3
7.2v 2/3A Saddle Pack

SW3
Revolver Wheels
Moabs/Claws
Integy 55t
AX10 Tranny
Integy 5645
RCP CVDs Up Front
RCP Max Turn Knuckles
Modified Tmaxx Shocks
Losi springs
DX3
8.4V 2/3a Saddle Pack
Sidewinder

Super:
Crawford Performance Claw
Tamiya Locked Axles
Integy 65T
Aluminum Axle Outers and Knuckles
Hitec 5645
Proline Beadlocks
Moabs
Full Four Wheel Sterring
Modified Traxxas 3 Channel
XL1



Crawl spots:
Side Yard
Watson Lake

Comps:
Not Yet

 

[ncgoose]

Hi,

Chandler, Maricopa

2.2

AX-10
Axial Beadlocks
Integy 55t
Hitec 5955TG Servo
LRP AI Esc
DX3R
Team Orion 4500 Rocket pack


Crawl spots:
backyard
front yard

Comps:
Not Yet

I bought the kit on Sunday and just got it all going today. This is my first crawler and I look forward to the gtg's. I am just getting back into R/C after a 8 year layoff. If any of you race offroad at SRS I will see you all there soon, campaigning Jayson Pangs old XXX CR and XXXT CR prototype.

One last thing, damn crawling is addictive. I know this will not be my last crawler.

 

[pencrazy]

north phoenix
just started crawling picked me up a axial off craigslist
drive at : papago,7th and deer valley,and cave creek
2.2 axial
pretty much stock
integy motor
futaba servos

 

[yz120]

lake havasu!
my son and i are new to crawlin and having alot of fun doing so.

 

[shaggy]

Phoenix glendale area.
Brand new into the rock crawling
Building a axial artr
Brother has the axial rtr

Where
Backyard
& Off of care free and 7th street

 

[Redlinerob]

Prescott, Az
Been crawling for two years now
N.A.R.C.C.A Competition Director
Proud Member of P.A.R.C.
CKRC Team Driver

HR MOA
GC2 1.9 MRC
Fubar Mini Skeeter 1.9 MRC
Yota Scaler
Slash ( Brushless )

Granite Dells / Watson Lake
All over Arizona
Arizona Summer Shootout '08 , '09
Moab '08 Nats
Nevada State Championships '08
WCC '09
Worlds '09

 

[VIOLENTJR]

Hello
Surprise,AZ
Axial scorpion kit final finished today.
lots of time spent at speedworld's Nitro pit with my 1/8 scale truggy and my wifes buggy.

 

[captainax10]

ax10

Gilbert, AZ

AX-10.
Integy 65t. VF digg. Straight Axle adaptors. Straight CVDs. Clockable C's. High Clearance knuckles. 4 link suspension. Panther tires. Axial Cvd's.

 

[2JSC]

The AX10 tuber project I was talking about -> http://www.rccrawler.com/forum/showthread.php?t=130306

 

[Rokbitr]

City: Flagstaff
County: Coconino
Crawler: 2.2 Axial ARTR chassis, Integy 55T, suspension upgrades
Spots: Around my apartment complex, Buffalo Park, and Sedona/Oak Creek Canyon
Comps: Not yet, but hopefully soon

Pic:

 

[J.DUKE]

Tempe Newbie

Hello. I'm new(ly addicted) to crawling. here my short list... ;-)

Scorpion RTR
Integy 55t
Losi shocks
TCS 4 link
STRC aluminum links (silver)
STRC aluminum skidplate (silver)
XC-1 body
Hitec Servo
Sexy wiring

Right by the law library at ASU, theres a 3 story tall hill covered in rocks the size of watermelons.

In guadalupe, about 1 mile south of the AZ Mills Mall, theres a place that sells rocks cheap. Build your own...:?:

 

[gpage13]

New Crawler in Gilbert

Gilbert, AZ (Pecos & Recker)

AX-10 Kit(first RC kit I've built)
Integy 45T Lathe motor
Novak Rooster Crawler edition
Futaba 2PH radio
Futaba S3003 Servo (going to upgrade to a HITECH 645MG in a few weeks)
built the Tranny in a mirrored config to help with torque twist
built the shocks in the limited travel config
stock wheels and tires

 

[bolibruch1]

ax 10 rtr

ax10 rtr to start just getting into this and I love it!

integrity 55t

JR Z650M High-Torque Metal Gear Servo

I live in Tempe

all over papago

 

[overkillphil]

I crawl any of the crazy rocks around town. Haven't been in a comp yet, but my rig crawls alright. Typical AX10, Novak 55/ Rooster Crawler, Losi Claws (worn out though, new ones on the way), twin mini LST packs (lots of run time, droop setup in front, soft springs in rear. Dig setup coming soon!

 

[jays96xj]

i live in phoenix. i have a clod buster with 55t motors,locked axles,nn chassis,16 inch wheel base,evx esc,futaba radio,emaxx shocks,f-650 body,moab xls.

 

[c.kisner]

hey guys,

i live in gilbert and work in tempe. me and a friend both have scorpions w/ misc mods, wheel weights, shocks, split batteries and all, try this and try thats.....oh yeah and the tires

do a lot of trips to the papago spots, we meet up and crawl every wednesday eve after work around 5-6 for a few hours or so.

anyone checked out the crawlin rock setup in hobby action, pretty good, but beware you will buy something new by the end.

if anyone is interested in meeting up, we go every wednesday, tonight was big hole in the rock@papago , we both broke later than earlier, so had fun!!!

heres a vid from a few months ago, you all know the spot tho:
http://www.youtube.com/watch?v=ffwgCPLih-k
enjoy
c.kisner

 

[Lilbro]

RTR AX-10 Slight mods.

Crawling over bricks in the front yard.

 

[mikedoug]

My name is Jed and I live in Tempe

AX-10 kit set up
645mg servo
novak 55 turn motor and associated lrp speed control
modded skid, losi shocks, 60wt all around with white springs in front and traxxas reds in back
home made ghetto link and saddle pack plates with help from my buddy bolibruch1
Aluminum front knuckles and C's
hammer m3's softened up with 9 oz in each front and 6.5oz in each rear

crawlin' at papago new and old, and at hobby action....met up with jamesdicken there this weekend, he's a cool dude with a sick rig.....