A Ascent-18 jumped into my cart. . . . . .

[Gramps]

'm watching YouTube videos and all of a sudden a Redcat Ascent-18 pops up. Watched the video which peaked my interest to see if it was just this guy that was excited or were there more. I think of all the videos I watched except one were by what I call influencers, ones who are given products to review. So I mainly scrolled to the running section if there was one, how many unboxings can a person watch. I need to quit doing this because the next thing I know I had one in my shopping cart and was headed to the checkout. This happened at Redcat's web store so now I will have to wait for it to be shipped and delivered to my door to find out if the hipe was true or not. For $99.99 release price it was real hard to resist.

More to come when I get one in my hands.

 

[Jrob]

My buddy Harley Designs got one and absolutely thinks it’s awesome. Redcat shipping is fast and he has his cage file available if you’re wanna modify yours. Look forward to see what ya do with it [emoji1306]


Sent from my iPhone using Tapatalk

 

[ferp420]

I have 1 in a cart too only I didn't click buy yet I was thinking puting a wpl yota hard body on it I'm having a hard time justifying it this month though next month maybe

 

[Jrob]

I got the evo pro and katana fx18 so was hard to do this one too, but I’m sure I’ll end with one to add to the collection lol

Rad to see all the growth in the micro community


Sent from my iPhone using Tapatalk

 

[NXPRSS]

I ordered one yesterday from redcats website and a few hours later I recieved a shipping notice and it will be here Wednesday!!
And as someone mentioned above, I saw the YouTube vid where the guy modified the truck and 3d printed a cage, it looked awesome !
All the youtube vids I've watched are all great reviews, hard to pass up for $99.99!!

 

[Jrob]

I ordered one yesterday from redcats website and a few hours later I recieved a shipping notice and it will be here Wednesday!!
And as someone mentioned above, I saw the YouTube vid where the guy modified the truck and 3d printed a cage, it looked awesome !
All the youtube vids I've watched are all great reviews, hard to pass up for $99.99!!

Harley design made that cage file available for you if you have access to a 3d printer [emoji1306]


Sent from my iPhone using Tapatalk

 

[B-MOW71]

This release caught me off-guard. From the reviews that I watched, it looks pretty good for the price.

So...I ordered one in blue from Amain yesterday. Received shipping notice today and should arrive sometime this week.

I did buy and download the Harley Designs roll cage. I think the cage as a good look to the body with the roof chopped off.

Nice to see that this comes with bearings and Redcat has also released upgrade parts at the same time as the Ascent release.

 

[bgredjeep]

I was tempted when I saw it, and $99 is cheap, but I've already got a hopped up scx24 sitting on the shelf that I never use. I didn't feel like adding another mini to ignore. Lol

 

[B-MOW71]

I was tempted when I saw it, and $99 is cheap, but I've already got a hopped up scx24 sitting on the shelf that I never use. I didn't feel like adding another mini to ignore. Lol

The $99 bucks is what twisted my arm. I also have a couple obsolete SCX24's sitting on my shelf. With these new 1/18 scale rigs, I have no need to even look at the 1/24 rigs.


I also forgot to mention that I did use the AMain 15% coupon and got the Ascent for $80 bucks and change plus shipping. Hard to pass that up!!

 

[Gramps]

Got shipping conformation, delivery scheduled for Thursday.

 

[bgredjeep]

The $99 bucks is what twisted my arm. I also have a couple obsolete SCX24's sitting on my shelf. With these new 1/18 scale rigs, I have no need to even look at the 1/24 rigs.


I also forgot to mention that I did use the AMain 15% coupon and got the Ascent for $80 bucks and change plus shipping. Hard to pass that up!!

Almost got me again. It wouldn't apply any discount to the ascent in my cart so I'm saved from a micro again. Lol. I suspect amain updated their stuff to block the coupons sometime after you ordered.

 

[B-MOW71]

Got shipping conformation, delivery scheduled for Thursday.

Nice. Mine should arrive Saturday.

Almost got me again. It wouldn't apply any discount to the ascent in my cart so I'm saved from a micro again. Lol. I suspect amain updated their stuff to block the coupons sometime after you ordered.

I must've got lucky. @Outlore in this thread:http://www.rccrawler.com/forum/redcat-crawlers/632912-new-clearance-discounts.html#post6148442 said the same thing.

 

[surfishjoe]

I have 1 in a cart too only I didn't click buy yet I was thinking puting a wpl yota hard body on it I'm having a hard time justifying it this month though next month maybe

Do it!

 

[Doom!]

I ordered the blue one, it was here in two days. so far it seems pretty capable.

 

[Gramps]

The Ascent 18 arrived today but with other obligations & then the weather I was only able to make a pass on the indoor course which doesn't challenge the 1/18th scale rigs at all. The build quality looks nice I didn't open it up and check the portals, diffs, trans for grease.



I noticed when picking it up with the body on that the sides of the body crushed in. The body just barely slides across the top of the sliders. The actual slider bolts to a plate that is bolted to the frame. I separated the 2 and got out the calibers and ruler. In a few minutes I had an idea and it was time to fire up Freecad and start drawing. A little later I had a prototype & threw it on the printer. Didn't noticed that the mounting holes were offset and I had then centered. Back the drawing board shortly I had another prototype. This one fit great so I printed a pair (there's a left & right) out of PETG.

Stock slider



Should have taken a picture of the piece before I installed it. After a little more looking I think it needs to be maybe 1mm higher.

 

[Gramps]

The 1st run of the new RedCat Ascent 18 straight out of the box. It rained last night and was cool and windy so the rocks were cold and didn't have good grip. The stock tires and wheels are questionable.

My thoughts after the 1st run. I was impressed with how it handled out of the box, however it would benefit from some low weight and some more front weight bias. Many said theirs was 50/50 but mine was 51/49 which could be the difference in scales. Now that I have a baseline I think I'll move the rx to the front plate and maybe change the shock angle to get it a little lower.

 

[B-MOW71]

The 1st run of the new RedCat Ascent 18 straight out of the box. It rained last night and was cool and windy so the rocks were cold and didn't have good grip. The stock tires and wheels are questionable.

My thoughts after the 1st run. I was impressed with how it handled out of the box, however it would benefit from some low weight and some more front weight bias. Many said theirs was 50/50 but mine was 51/49 which could be the difference in scales. Now that I have a baseline I think I'll move the rx to the front plate and maybe change the shock angle to get it a little lower.

Nice job on the sliders. I have seen and heard that the tires aren't the best. My Ascent18 arrives today and I'll be swapping out the wheels and tires immediately.

 

[JimK]

I've seen a few YT videos and these look like they are going to be fun little trucks. That red one looks great Gramps. Availability here in Canada isn't the greatest yet but it looks like they're gonna be about $150 cad when I can get my hands on one. It's nice that all the upgrade parts are available right away for this truck too.

 

[Gramps]

Nice job on the sliders. I have seen and heard that the tires aren't the best. My Ascent18 arrives today and I'll be swapping out the wheels and tires immediately.

I watched a YT video of one that only had Injora brass wheels and tires on it and it was crawling amazingly.

I've seen a few YT videos and these look like they are going to be fun little trucks. That red one looks great Gramps. Availability here in Canada isn't the greatest yet but it looks like they're gonna be about $150 cad when I can get my hands on one. It's nice that all the upgrade parts are available right away for this truck too.

Can't you order one directly from Redcat while they are still $99.99 not sure that the exchange rate on that would be.

 

[Gramps]

Moved the esc from the back to the front. There is very little if any clearance between the hood and top of the esc. Don't think the esc will fit if I flop the mount. Maybe I will de-case it. Also checked the diffs for grease in my opinion there was none so I added some Lucas Red & Sticky.