6x6 Peterbilt Semi Truck

[Tommy R]

As is typically the case for me, pics could be better. It looks nicer in person, but here ya go....

 

[Tommy R]

Progress.... Waiting for Semi Joe to get more Peterbilt aluminum grills in stock.

 

[Tommy R]

A member on another forum asked about the paint I used. It's all just Dupli-Color from the local auto parts store: Bahama Blue and Arctic/Dover White. The white is definitely a softer eggshell color. Kinda old school looking and precisely what I was going for (I got lucky!). The blue is nice, but I was really hoping for a teal.....just couldn't locate any I liked. Everything is cleared with Dupli-Color gloss, as well.

Anyway, here's the paints for those who may be interested:

 

[Mike Flea]

Paint and clearcoat turned out really nice, no runs or drips, "thumbsup""thumbsup"

 

[Tommy R]

Tommy, here's a pic of a small electric bulb remover, you can find them at electronic stores, or if you have a science and surplus store nearby. It's made out of rubber, with cups at both ends.

I work at a water plant, and we have little bulbs in recessed panels that make it hard for removal and replacement with just fingers, so these come in handy, and they're under a buck a piece."thumbsup"

You're the man, Mike! I picked up a tiny bulb R&R tool from ebay and it looks to be working like a charm. Thanks!

 

[Tommy R]

Just had to see what the painted body looks like on the chassis with the wheels/tires installed....

 

[Mike Flea]

Glad it worked out, and that is one beautiful rig "thumbsup""thumbsup"

 

[Tommy R]

Thanks, Mike!

 

[Tommy R]

On June 18th some Texas folks are getting together with some RC construction equipment and trucks to play around. I'm stoked about running my Peterbilt with some other rigs so that was enough motivation to finally get off my butt and work on the next step of the truck: mounting the transfer case.

I decided on an Axial trans as a t-case. It's going to hang down pretty darn low, but that's okay. This thing isn't a rock crawler. And if the low slung nature of the t-case causes too many hang-ups, I can always build a new bracket with the t-case oriented in a different direction. But with it the way it is, the front driveshaft easily clears the transmission so I figured I'd give it a whirl.

First I took some folder material and started mocking up the overall length of material needed and where I'd want to bend it (approximately, of course).

Then I transferred it to some 1/8" THK aluminum flat stock and began bending it. I just used my vice so the bends did not come out too cleanly. That's okay. It'll work for now and doesn't look awful.

Was able to re-use the stock rear driveshaft to join the trans to the t-case.

Using the stock main driveshaft for the front now. This may change soon, though.

The t-case sits a bit above the framerails so I had to trim away some of the sleeper cab floor.

Now it'll sit nice and flush. I just need a rear driveshaft to join the t-case and the middle axle.

 

[XSRCdesign]

Looks good, I bet this thing is a riot on the trails

 

[Tommy R]

Looks good, I bet this thing is a riot on the trails

Thanks! I hope it will be. Couple more pics....

Showing off the new Lesu aluminum grill.

Front driveshaft and t-case skid just visible below.

 

[R.Billy Rob]

I'm really loving this truck! It's given me so many ideas. Great job!

 

[Mike Flea]

Beautiful grill, very nice! "thumbsup"

 

[chino63]

Well, I have to say, it's a winner for sure.

Earlier today I was watching scale truck videos and came across a vid of an r/c semi with working hydraulic palfinger. Again stoking my fire to start messing with miniature hydraulics. All i can say is it's going to be expensive. Plans are for a dump truck and stuff...

Also, I gotta say I'm jealous you have people near by to run semi's with.

 

[Tommy R]

I'm really loving this truck! It's given me so many ideas. Great job!

Beautiful grill, very nice! "thumbsup"

Well, I have to say, it's a winner for sure.

Earlier today I was watching scale truck videos and came across a vid of an r/c semi with working hydraulic palfinger. Again stoking my fire to start messing with miniature hydraulics. All i can say is it's going to be expensive. Plans are for a dump truck and stuff...

Also, I gotta say I'm jealous you have people near by to run semi's with.

Thanks, fellas!

Dean, at the moment I really don't have folks to run semis with. However!! Yesterday at a crawl I met a fellow crawler who has several construction dozers/excavators and a semi. He's going to host a truck and construction meet on his ranch in a couple weeks. If it gets good support and participation, we're going to plan on a more pavement oriented get together sometime soon. We're hoping we can get it to take off around here!

 

[JatoTheRipper]

That's stunning! Great work.

 

[Tommy R]

Okay, folks, I need some suggestions! All throughout this build I've had the plan to paint the chassis the same blue as I used on the truck. I've toured a Kenworth and Peterbilt plant and on some chassis they would paint the entire chassis/suspension the color of the body. The entire rolling chassis would be assembled and then rolled through the paint booth so EVERYTHING would get painted. I love that look and it gives the truck a very "high end" appearance.

I'm 90% sure I'm going to do it (and soon!), but want some thoughts on it before I commit. Most trucks will have a plain gloss black chassis/suspension, but I want this truck to have a "well cared for" look to it and think a painted chassis would suit it, but I'd like to hear y'all's thoughts.

Here's a few trucks that I found inspirational. They look like work trucks that are taken very good care of, but they're not all out "show trucks". This is the look I've envisioned, for the most part....

Now take note of this one... The hubs were also painted the same color as the chassis/body. I'd like thoughts on this, as well. I'm leaning toward leaving mine black, though. Suggestions?

For what it's worth, the fuel tanks will remain chrome, but the straps will be painted blue. And here's a pic of the truck making a cameo appearance at the drift track in Houston last night:

In the background....

 

[Itali83]

I think you're spot on painting the chassis blue. I'd paint the hubs blue too because they'd be on the chassis when going through the paint process. Plus it'll really pop with your chrome wheels. Don't think twice, start painting. Great job so far for sure!
Ben

 

[Tommy R]

I think you're spot on painting the chassis blue. I'd paint the hubs blue too because they'd be on the chassis when going through the paint process. Plus it'll really pop with your chrome wheels. Don't think twice, start painting. Great job so far for sure!
Ben

Thanks, Ben! That's my train of thought, as well. I'm pretty sure the chassis getting painted, but am still open to hearing more opinions. And thanks for the input on the painted hubs. I guess I could always paint them black again afterward if need be.

 

[R.Billy Rob]

Definitely paint the chassis! It would be the perfect touch to really set it off. With the beautiful paint job you already did on the cab, it would just look incomplete if you didn't. There's my two cents for ya.