1.9 scale rig picture archive - No talking

[SACCO]

rock racer
mamba 25
BM6
TLT axles
Tube frame by me
3s lipo
spektrum
GD600 into custom transfer case(using wk guts)

 

[storm4710]

f350

two weeks ago and now"thumbsup"
carson cup engine
hot bodies 4´/10mm shocks
3 linkede with custom made links
large crome wheels
towerpro from rockwerks for steering and a standart acoms for shifting
LRP runner series esc
cant see it but the bull bar is bent back in the drivers side

 

[mxer611]

 

[zumzum5150]

here's my 1.9 scaler

specs:

diaz 12 dtrail chassis
chino tranny motor plate
r2 tranny
K5 blazer
hpi super rear suspension shocks
turned down TLT front shocks
diaz bruiser leafs
995 winch serv0
JR 650
55T w/12t pinion

 

[Just Zach]

A couple of the best pics I've taken.

 

[METALHEAD]

I gotta throw my two boys in here:

Full custom build:

-Aluminum rail frame with custom bumpers
-35T lathe/TA02 trans/custom drivelines
-HPI wheels/SDI Trail Docs
-Custom 4-link suspension/TLT axles
-Hardshell bod with cut and buffed clearcoat (NOT the Walmart Earnhart SS Intimator )
-Working Headlights and tail lights (not turned on)

Straight up Highlift:

-Bone stock HL
-4 Channel FM Futaba brains
-4 LED headlights (2 x 3000 mcd & 2 x 6000 mcd) and 2 tail lights (2 x 2000 mcd red)
-Locked rear diff/open front diff (check out the right front unload on pic #2 "thumbsup")

 

[ranger0621]

my 1.9 blazer

 

[hiliftcrawler]

 

[PinchFlat]

Oh... Here are some pics & specs of my PeeWee 1.9...

Build Thread:http://www.rccrawler.com/forum/showthread.php?t=90973
TCS Gopher Tube Chassis
Tamiya onroad shocks
Axial trany
P2K2 27t Stock motor/18t pinion
Novak XRS
2 cell Lypo
JR125MG servo
TLT axles
Pajero rims w/narrowed & reduced Moabs
Finish Line RC Delrin & Lunsford titanium links
What ever else...

 

[chaman]

Loaded Blues

Custom aluminum/delrin chassis
TLT locked axles
55t motor
HPI rims on Tamiya tires
1980 Proline Blazer K5 body
Full custom scale detailing (still a work in progress)
Next: full exterior illumination, full interior)

 

[scalerfreak]

here my newest scaler

 

[carcrafter]

my scout

Specs:

Ambush body
MFM polished chassis
Integy 60 turn motor
Fastlane Machine Stampede tranny (locked)
Wheely King axles (locked fron and rear)
Hi Lift tires on hpi stock car wheels
112 mm links

 

[colonelangus]

just finished

 

[51WillysJeep]

Petersons 4 Wheel and Offroad Ultimate Tacoma

Heres My "Petersons 4 Wheel and Offroad -1.9 Ultimate Tacoma" project from a few years back. I sent pics of this truck into the magazine, and they were so impressed with the build, they actually published it into the mag, in the "Drivelines" section..!!"thumbsup" Enjoy..!!!

 

[chaman]

Updated pics for the haters!

 

[TEAM-JCJ]

Heres my HiLift kit, Pretty much box stock thus far, But all that will change in due time.

 

[BOWTIE]

updated pic.

now with rock stompers

 

[colonelangus]

updated pic high lift with mags and slingers

 

[KeithLuneau]

Here's some of my scale trucks...

First is the "Project Hummer" which started as a typical stock Tamiya Hummer, and ended up like this after much work:

 

[KeithLuneau]

Next is the Land Rover: