Discussion on the v2 of the Puller Pro starts here http://www.rccrawler.com/forum/holm...ler-motors-lay-down-power-20.html#post5996427
It is officially time to announce our Puller Pro BL lineup of motors! We have been working for years to bring together the right mix of quality, power, smooth startup, and great value. Now we are ready to tear things up with our own line of high quality 4 pole sensored motors!
Holmes Hobbies LLC
We have three lengths currently available. 540S "Stubby", 540, and 540XL.
-The 540S is a short can at only 44mm, yet packs the same length internals found in most regular "540" size 4 pole motors such as the Castle 1406 and Tekin Pro4. Don't let the small size and weight fool you, it has serious potential inside! The rotor and stator is tuned for extremely controllable startup, making it a great match for all sorts of vehicles.
-The 540 is a regular 540 size can at 53mm long, and has similar length internals to the Castle 1410 or Tekin Pro4 HD. 540 size but 550 power! The rotor and stator is tuned for extremely controllable startup, making it a great choice for rock racers and heavy rigs that need precise control.
- The 540XL is 63mm long, and could be classified as a 550 style motor if we cared about racing rules. We developed this motor for heavy and fast rigs like the Axial Yeti. It is basically an 1/8th scale motor crammed into a 36mm x 63mm case. We tuned the rotor and stator for best loaded efficiency and punch, so it gives up a little startup finesse in exchange for cooler running and highest power. Absolute beasts!
Currently the Kv choices range from 3300 to 3500 KV. Any tech questions or future KV suggestions? Post em up! For installation and specific vehicle support, please email or call us direct at Holmes Hobbies. Although I will try my best to answer questions here, I cannot always spend the time and you will get faster and more reliable support through my customer service department.
It is officially time to announce our Puller Pro BL lineup of motors! We have been working for years to bring together the right mix of quality, power, smooth startup, and great value. Now we are ready to tear things up with our own line of high quality 4 pole sensored motors!
Holmes Hobbies LLC
We have three lengths currently available. 540S "Stubby", 540, and 540XL.
-The 540S is a short can at only 44mm, yet packs the same length internals found in most regular "540" size 4 pole motors such as the Castle 1406 and Tekin Pro4. Don't let the small size and weight fool you, it has serious potential inside! The rotor and stator is tuned for extremely controllable startup, making it a great match for all sorts of vehicles.
-The 540 is a regular 540 size can at 53mm long, and has similar length internals to the Castle 1410 or Tekin Pro4 HD. 540 size but 550 power! The rotor and stator is tuned for extremely controllable startup, making it a great choice for rock racers and heavy rigs that need precise control.
- The 540XL is 63mm long, and could be classified as a 550 style motor if we cared about racing rules. We developed this motor for heavy and fast rigs like the Axial Yeti. It is basically an 1/8th scale motor crammed into a 36mm x 63mm case. We tuned the rotor and stator for best loaded efficiency and punch, so it gives up a little startup finesse in exchange for cooler running and highest power. Absolute beasts!
Currently the Kv choices range from 3300 to 3500 KV. Any tech questions or future KV suggestions? Post em up! For installation and specific vehicle support, please email or call us direct at Holmes Hobbies. Although I will try my best to answer questions here, I cannot always spend the time and you will get faster and more reliable support through my customer service department.
Last edited:
Thanks John
