• Welcome to RCCrawler Forums.

    It looks like you're enjoying RCCrawler's Forums but haven't created an account yet. Why not take a minute to register for your own free account now? As a member you get free access to all of our forums and posts plus the ability to post your own messages, communicate directly with other members, and much more. Register now!

    Already a member? Login at the top of this page to stop seeing this message.

Wraith Electronics box

I just spoke with our shop guy and we will have another fresh bat h of wraith boxes sometime this week "thumbsup"

I'll post up once I have them in my hands and contacting everyone on the waiting list :mrgreen:

Merry Christmas everyone and thank you for the support "thumbsup"
 
Just got my wraith box & I am very happy!
Nice thick & solid construction & a perfect fit.
It is a bit smaller than I thought but I managed to fit it all in there.
Pics to come.
Thanks for a great product!
 
Just got my wraith box & I am very happy!
Nice thick & solid construction & a perfect fit.
It is a bit smaller than I thought but I managed to fit it all in there.
Pics to come.
Thanks for a great product!

Right on, glad you got it. We designed it with as much room as possible and be able to work with multiple set ups "thumbsup"
 
Great!

I see the cross brace is removed on the pics, any chance to mount it with little trim work?

Any idea?

Thanks a lot!
Sent from my iPad using Tapatalk HD

hi slim. my bad, didn't mean to disregard your post :oops: I haven't had any time to take pics with the cross brace.

You can mount the cross brace in the stock position by drilling holes 1/4" in the box. 2 in the bottom where the cross brace meets the main frame rails and 2 holes on each side where the cross brace attaches to the outer hood rails "thumbsup"
 
underhood.jpg

Ae-2 speed control
CC BEC
2000 MAH 2s lipo
stock Wraith Rx
All fits snugly. Box is held tight with 2 zippies, Closed cell foam under the hood kept out all water & debris from a trail test run with some axle deep puddles.
I want a Wraith drop bed molded from this material, any hope in the future?
 
underhood.jpg

Ae-2 speed control
CC BEC
2000 MAH 2s lipo
stock Wraith Rx
All fits snugly. Box is held tight with 2 zippies, Closed cell foam under the hood kept out all water & debris from a trail test run with some axle deep puddles.
I want a Wraith drop bed molded from this material, any hope in the future?


Thanks for posting this picture.
Answered my question about CMS compatibility - looks like plenty of room!
 
Great idea thanks for putting them out there. Will be looking to get a couple of them when you have them back in stock
 
Alrighty gang, thank you for everyones interest in the Da Box. I have PM'd everyone up to this point for orders and we'll be shipping out this batch when everyone replies back.

Michael, our plastic fab guy has a family and a full time job is working on more boxes when time allows and your patience is greatly appreciated "thumbsup"

We're going to start a waiting list in the next post, please copy and paste your name/screen name in order and we will contact you when we get more boxes in stock.

We will not take pre-order payments, we run a legit business and we don't believe in taking peoples money without product in stock "thumbsup"

I do have a couple pics of the box with a test fitted 2s hardcase lipo, it fits but sticks out the top of the box by just a bit, check it out and we'll be answering questions as quickly as possible.

IMG_0470_zps35292e20.jpg


IMG_0471_zpsa32529d8.jpg
 
underhood.jpg

Ae-2 speed control
CC BEC
2000 MAH 2s lipo
stock Wraith Rx
All fits snugly. Box is held tight with 2 zippies, Closed cell foam under the hood kept out all water & debris from a trail test run with some axle deep puddles.
I want a Wraith drop bed molded from this material, any hope in the future?
Dinky RC has a rear drop box. Looks like the same or simular material.
 
I'll talk to Michael, our plastics guy and get one designed. Let me know what you guys would want ie: ideas, comments, suggestions.

1 piece drop in box made as heavy & same material as under hood box in black.
Covered area above rear shocks outlined so you could cut it out for droop setup (rear shock mount inverted) or leave covered for stock rear shock mount setup.
 
Back
Top