• Welcome to RCCrawler Forums.

    It looks like you're enjoying RCCrawler's Forums but haven't created an account yet. Why not take a minute to register for your own free account now? As a member you get free access to all of our forums and posts plus the ability to post your own messages, communicate directly with other members, and much more. Register now!

    Already a member? Login at the top of this page to stop seeing this message.

Will these batteries power lights?

TURBOxN3RD

Newbie
Joined
Jun 17, 2015
Messages
27
Location
Greenville
Ok, i'm new to the crawling/ car side of RC but used to run heli's. I have a few good lipo's laying around that I want to put to use (hopefully) when I get my scx10. The batteries are both 7.4v one of them is 900mAh (25c) the other is a 800mAh (10c). These are both heli batteries but was wanting to know if they would be capable of running a few leds or even a winch? Thanks in advance and happy crawling.
 
Short answer, yes.

The 900mah batt provides 22.5 amps and the 800mah batt = 8 amps
That should provide enough juice for what you need. Not ideal for powering the whole truck as the motor may pull more than 22 amps, but it seems you are aware of that.
 
Short answer, yes.

Not ideal for powering the whole truck as the motor may pull more than 22 amps, but it seems you are aware of that.

Yes I am"thumbsup", thanks for the input on it. I looked everywhere to see if they were capable of powering them with no luck. Now for the actual install:|
 
Back
Top