Which screw size attaches servo to servo link on Gen8 v1, no info in manual

[Mario385]

Unfortunately, redcat did not include the size of the screw that attaches the servo link to the servo in their exploded views:x. I am searching everywhere. Man, only 15 minutes an the screw falls out. Super disappointed son. I hope the joy to repair ratio is better than this.


Please, I want to get this up and running for him, can anyone let me know which screw to purchase?

 

[Woundflatout]

I am pretty sure it's an M2 but not sure of the length. Mine fell out too, and I scavenged a screw from another Redcat car.

Sent from my KB2005 using Tapatalk

 

[Mario385]

I found it.

M3X16mm. I think a 14mm will d for future reference.

 

[meatmonkey]

You should torque check everything on an RTR if you want to ensure long term durability. Main ones to watch are wheel nuts, driveshaft through-pins, and steering hardware.

Things flex and give when being used/abused and kids tend to be extra hard on these toy trucks.

 

[Mario385]

You should torque check everything on an RTR if you want to ensure long term durability. Main ones to watch are wheel nuts, driveshaft through-pins, and steering hardware.

Things flex and give when being used/abused and kids tend to be extra hard on these toy trucks.

Thanks for the advice! I am finding that I definitely have to do this.