What Powers Your Wraith?

[2500hdon37s]

swapped to-
Tekin RS esc with a 3s lipo
and Tekin 13.5t redline motor. :twisted:

 

[BoardN88]

So alot of MMP's... so you can program to make a good esc for crawling?

 

[BoardN88]

I know this is a newb question but whats the maintanace on a brushed motor? Only thing making me push towards brushless....

 

[GeauxFYourself]

I've done as much reading as I can currently stand. It started off the diffs were installed backward at the factory...they just reversed the channel on the radio. The motor should not run CW...the factory worker just messed up the assembly. Manufacturers sites say the Wraith uses a CW motor. So whats the answer? When assembled as Axial intended, is the motor CW or CCW?

 

[TheDude530]

So i have a rather newb question as well. if i upgrade my wraith to a sv2 castle creations esc with a 4 pole motor do i need to upgrade my radio to? Buddy of mine says his wouldnt work with stock axial radio. then again his radio has been dropped on to rocks one to many times

 

[jcsaxial]

Im new to the wrath and have been messin w a scaler so i gfuess this is a noob question. Brxl 25t intensity stock spur and 20t pinion. Motor went up in smoke today. Ive been told a 16t pinoinfor this app. Any suggestions? Also runnin sc1286 savox servo

 

[ynmech]

I have a BR-XL
19t JPH
60/13 32p & higher gears in the diffs
Spectrum 6030, steering
traxxas dig servo
stock tires on adjustable offset wheels
VP steering Ti & lower links.
Now wringing in lights.
Waiting for $$ for the sway bars. Runs good. The best dig I have used on that tranny.

 

[Hittman]

In my dad's wraith he has the dynamite fuze sensored brushless 13.5t combo. Its great. Super smooth and great low end speed. That is powered by hyperion 3300mah 35c 3s lipos. He also has a Hitec 7950 and a futaba receiver.

Super fun rig to drive"thumbsup"

 

[tjb]

-Mamba Max / CCBEC
-Trinity Co27 Pro (14/87)
-JR 8711 for steering
-Stock Diffs

 

[crawler nut]

Mamba Max with CC BEC set at 7.2v
Holmes Hobbies 27t torque master expert geared at 11/62
Savox 1268 for now. soon to be 7950
3s 1650mah 40c
FlySky GT3B
5.75" Claws on Axial Rockstars

 

[Tonysmini]

Mtroniks RV12 Assault, CC BEC, Tamiya Sport tuned black can, 80/15 gearing.

Hitec 5995mg servo and Suer Swampers, a good spread of power.

 

[knuckleBuster]

So after reading all the threads i'm more confused. I want good crawling and a fair amount of wheel speed. I'm thinking
Tekin RS PRO ESC
Tekin Pro4 3300KV motor
Opinions please, and what gearing should I go with?
Andrew

 

[Harley]

So after reading all the threads i'm more confused. I want good crawling and a fair amount of wheel speed. I'm thinking
Tekin RS PRO ESC
Tekin Pro4 3300KV motor
Opinions please, and what gearing should I go with?
Andrew

Check the motor thread, there is gearing info posted on the first page.

You will need drivetrain upgrades for that motor for sure.

 

[captain kirk]

rx8/4600kv combo 24/52 32p gearing 3slipo

 

[wraithfreak]

Very simply... Novak Wraith edition because I stumbled across this web site after I build my Wraith kit. Will be upgrading to better when I get the funds for better drive train and motor and esc. Will be going with Harley's bullet proof Wraith.

 

[frdtrkguy]

MMP
Pro4 3300
3s 2200's
11/60 32p

 

[Solitaire]

HH 16T Crawlmaster
BRXL
12/56 32P
3S 2800 LiPo
8.6 lbs AUW

 

[MonkishShihtzu]

Mamba Max Pro
Tekin pro-4 3300kv
Castle bec
3s 4000mah or 2s 5000mah

 

[Hittman]

HH BR-XL WP version
HH 10t Colbalt puller
Savox Sa-1230sg servo
Maxamps 1300mah 3s lipo

Stock diffs
19/87 gearing

 

[GMV]

MMP w/CC bec set at 6v
Tekin Pro4 3300Kv or Redline 13,5/17,5T....
14/56 32P or 19/80 48P (Depends on motor setup)
3S 3300.