• Welcome to RCCrawler Forums.

    It looks like you're enjoying RCCrawler's Forums but haven't created an account yet. Why not take a minute to register for your own free account now? As a member you get free access to all of our forums and posts plus the ability to post your own messages, communicate directly with other members, and much more. Register now!

    Already a member? Login at the top of this page to stop seeing this message.

What Powers Your Wraith?

cencal

Rock Stacker
Joined
Feb 4, 2009
Messages
81
Location
California
Just wanted to get an idea of what everyone is running.

My current setup:

MMP
4s/3s 2200
CC BEC
13.5 Sensored Tekin
Hitec 7950th
 
Tekin RX8
Tekin SC4X 4.5T ( 4800kv)
savox 1268
protek 2s 5000 65c
specktrum rx\tx ( switching to futaba)
54\14 32p
36\14 diff
 
Holmes BRXL (waterproofed)
13t Crawlmaster
Hitec 7954 front and rear
Castle bec
2200 3s

Hitec 5995 remote winch powered by 850 2s
 
Mostly stock except:

12t Crawlmaster, Checkpoint edition
2s 5000mah lipo or 2100 3s lipo

I need to swap in a BEC for 3s use or throw in a TorqueMaster speedo, my servo is cutting out on 3s. After that I am swapping in some Futaba servos.
 
novak 3s goat
18.5t brushless combo
futaba s9157
traxxas summit tx and rx (to utilize potential rear steering one day, and dig unit on an inexpensive platform)
BEC on esc for 3s setup (novak recomended)
 
Last edited:
Holmes BRXL ESC (waterproof)
20T Torque Master Pro
3s Lipo 4200 mah
JR servo for now switching to a Hitec soon.

You can't go wrong with anything Holmes just make sure to do your home work on the different turn motors.
 
Holmes BRXL ESC (waterproof)
20T Torque Master Pro
3s Lipo 4200 mah
JR servo for now switching to a Hitec soon.

You can't go wrong with anything Holmes just make sure to do your home work on the different turn motors.

Go by KV, it is easier than turns and helps the transitions between construction styles "thumbsup" Maybe I should do that on the site :lol:


These guys running the Tekin SC motors are nuts :twisted: They need some serious beef under the rig, like Twin force/ Mad Force axles :twisted::twisted:
 
Holmes BRXL ESC (Waterproof Version)
19T Torque Master
3s Lipo
5955 Hitec servo
CC Bec
80t/14t
 
Last edited:
OG Mamba max waterproofed
Trx titan 21t (till i can get another HH motor probably 20t ish) castle/Neu 1406 4600 4pole for when im feeling frisky
Hitec 7955
ccbec
Turnigy 3000mah 3s 40c
 
These guys running the Tekin SC motors are nuts :twisted: They need some serious beef under the rig, like Twin force/ Mad Force axles :twisted::twisted:

I played the Twin Force game years ago(05?) when they first came out. Novak HV4400 motor on 14.4 volts kept breaking dogbones. All 4 dogbones now have 2-3 spots where I welded them back together.:lmao:Hmmm, two short sides would be close to Wraith wide.......
 
Holmes BRXL - waterproofed
13t Crawlmaster - smoooth!
Hitec 5955TG
Castle bec (soon to be installed, but really don't need it yet)
3000mAh 3s Turnigy 25-50C
87/18 gears, going to install 87/20 and the speed will be perfect I think.
 
Mostly stock except:

12t Crawlmaster, Checkpoint edition
2s 5000mah lipo or 2100 3s lipo

I need to swap in a BEC for 3s use or throw in a TorqueMaster speedo, my servo is cutting out on 3s. After that I am swapping in some Futaba servos.


More then half of the people in here have said BRXL and you don't even have one of your own in yet:lmao:. The horror:mrgreen:
 
Back
Top