-
Welcome to RCCrawler Forums.
It looks like you're enjoying RCCrawler's Forums but haven't created an account yet. Why not take a minute to register for your own free account now? As a member you get free access to all of our forums and posts plus the ability to post your own messages, communicate directly with other members, and much more. Register now!
Already a member? Login at the top of this page to stop seeing this message.
------ Team LERK Night/Day GTG------
- Thread starter m&mkrawler
- Start date
Nitroguy360
Rock Stacker
Well i have a 27t trinity D3.5 with stock gears (14/87) it has speed behind it and has great power.
What motor are u running and specs? maybe that will help
EDIT:Actually i was about to post a short clip of its run.. its awesome for how vintage this motor seems
EDIT #2 http://youtu.be/EB-goclNYhE Here is the video =D
Last edited:
JRock
RCC Addict
Yea noodle I would say 18 tooth pinion for like a 2 cell setup and stock spur 87 tooth if your running a 35t motor or 20-22 tooth if your running a 45t motor. Let me know what your planning on using for the electronics-Battery, esc and motor?????
JRock
RCC Addict
Ok guy's looks like we'll be having a little GTG/Comp at my garage on friday the 20th. This is mini comp rigs only and we'll start around 5:00 pm. You can come at anytime as this is just going to be for fun. Hope to see everyone come out to play"thumbsup" Thanks, Fridays almost here lol
Jason
Jason
Nitroguy360
Rock Stacker
I think you will get some speed out of it though.now end at least is all u need
the stock axial Orange is a 55T, so you have a different brand or?
my 27t gets hot so i have to go 12 or 13 and 90 (13/90) =\
Personally i wouldnt get the same turn motor there based on all torque. some speed is good to run to next gates but. *shrugs*
oh i just realized your in livermore, ill be in newark this weekend we should meet up =p
Nitroguy360
Rock Stacker
all good man family first"thumbsup"
yea i think im wearing mine out to. Piece of shit plastic!!!
im looking at steel ones right now,
JRock
RCC Addict
Oh man I stumbled across this today and had to go back home to get my crawler:mrgreen: lol Anyways here's some pics of a 2.2 comp spot for sure"thumbsup"
mrG
Rock Crawler
Looks like a new spot"thumbsup" Where is it?
finishline
RCC Addict
Dude thats the spot i told you about like a year and a half ago, on river road bye the dog pound right?
JRock
RCC Addict
River road just off 108 at a river park, It's about 6 minutes from my house to the rock "thumbsup"
Same as above:mrgreen:
I was wondering if this was the spot you were talking about lol. Well I went there when I first moved to Oakdale and that rock wasn't there but yea thats a pretty fun spot. I took a few bridges there and set up a few courses and didn't even touch a hardly any of the rock thats there:shock: Can't wait to do a GTG there. I think with a little rock placing and some bridges we can do a comp with the minis.
Last edited:
JRock
RCC Addict
Hey Donnie we need your truck with the lift:shock::mrgreen: OH YEA LOTS OF ROCK LOL
Nitroguy360
Rock Stacker
Check it out jay, i took the inside out and set it on to see what it looks like now that droop is taking place. what you think? and I can re-drill new mounting holes once my part comes in =)
It keep the jk or sell it to some kid for 80 as it sits what you think?
It keep the jk or sell it to some kid for 80 as it sits what you think?
Nitroguy360
Rock Stacker
I need to find a decent body then.. There so damn exspensive atmodesto hobby omg... Any ideas.where.to shop
