Tamiya CR-01 Picture Archive - No talking

[EeePee]

A thread to post one or two pictures of your Tamiya CR-01!

Give us some specs too, as it's a tech forum. "thumbsup"

Chit chat, questions and posts with no pictures will be deleted. You can PM the poster for answers. 8)

 

[emaxxjeremy]

i'll start with my grill-less rig

 

[EeePee]

And here's mine:

Tekin FXR ESC
MaxAmps 5000HV 3S battery
Integy 35 turn motor
Airtronics 361 servo
Spektrum SR3000

Proline Bushwacker body

 

[cartronicshn]

Honduras style

Great idea EP, here's mine.
Novak goat system
Eritex 5 spoke wheels
Hammers m3
Proline Buschwacker body
Futaba radio
Tp 945mg servo
4.4 maxamps 7 cell batt

Build thread of course,

http://www.rccrawler.com/forum/showthread.php?t=117973

 

[genki]

And here's mine

Castle Sidewinder ESC
Waypoint 1350mah 2S battery
Atlas Hobby 50T Rockclimber motor
TowerPro MG946R
CCBEC
Spektrum SR3000

Tamiya body
No stabilisers and 35W front and 45WT Rear oil.

More info >>> http://www.rccrawler.com/forum/showthread.php?t=117032

 

[dholby5150]

 

[william g]

proline 80's chevy "thumbsup" on a CR01 chassis, just remove front bumper and wahlah

HPI Bronco

Rear links have been moved, and shortened to correct the wheelbase a lot more than it is stock.

.

 

[twisted]

mine :
futaba am radio
stock motor
hitec digital servo hs 5625mg
novak super duty

 

[Big_Lumpia]

Mine in all it's glory...

HPI Jeep Rubicon Body
Novak Rooster system w/ Novak 55-turn motor
Hitec HS 985MG x 2 for front and rear steering
Kimbrough servo savers
Spektrum DX6I radio w/ AR6200 full range receiver
Pro-Line Power Stroke By-Pass shocks w/ 40wt (original shocks leaked).
Mini 1/10th scale Recaro seats x 2
WWE Divas action figures (Candice Michelle & Melina)
Mini Asian Blue Dragon

I also had to extend the front bumper almost two inches to accommodate the longer body.

 

[Roc]

Here is mine
All stock except with a bushwacker body.

*update*
Swapped the spring round
Jta's mod
Moabs on aixial rims without foams (air tight)

 

[srcars]

Here is a couple of my Land Cruiser. Std Build. plus rear suspension mod and rear steer. Love this kit to bits, Well done Tamiya.

 

[theonek]

cr01 unimog

so eeeppp's build made me do it... i also was gonna sell the body but last minute change...

cr01 with a unimog body
dx3r
rooster crawler
2 cell lipo (5000 mah)
servo = still not sure yet
"thumbsup""thumbsup""thumbsup"

im still working on this build too

 

[Theibault]

Ok, here's mine with the botched bushwhacker basher body (that's B4 to you all).
3PJ
Tekin FXR
Hitech 5645
The rest is stock.

 

[Cob]

El Paso Crawler

Finished Sunday 6/1/2008

Great kit and surprisingly capable crawler.
Enjoy;
Cr-01 kit
Novak Rooster Crawler ESC
Hitec 985MG
Stock motor
Spektrum SR3000

If there happens to be anyone near El Paso and would like to get together for a day of crawling, feel free to pm me or post here. The spot the pictures were taken has unlimited potential and is a 5min walk from my house!

 

[UNGLEWD]

Icon CR01

Stock CR01 Kit
-Novak Rooster
-4200 SMS stick pak
-Cut foams, No torsion bars, Rear shocks relocated
Wanted to give it some good runs as a stock kit

A few shots with the final stock goodies and decals on...

 

[sandblaster87]

pretty much stock...
45t
645mg
tazer
mud slingers
shock mod
futaba radio
the white fj looks like my dads 1st one he had, the black fj kinda looks like his last one & the red one looks like my uncles old one.

 

[vtt]

my rig.

no electronics yet , will update later.

 

[Nobby]

Still stock for now, but with a light kit...

 

[metalry101]

Here are a few of mine. It's nowhere near done...and I know the pics aren't outside...but it is 1:45 AM afterall. I'll get some action pics this weekend.

 

[metalry101]

As promised, here are a few action pics from this weekend.