Soze finally gets around to the Element Enduro Builder's Kit

[soze]

Soze finally gets around to the Element Enduro Builder's Kit (AKA: The Pirate Wagon)

I got this Enduro Builder's Kit when it first came out. I've been slowly accumulating parts for this build, and I think now is the right time to finally get it going now that my Sendero is close to being set as-is.

With this build I'll be trying some 3D prints and some other unique parts, but first we'll start with a stock kit build before we start the experimentation.

Follow this build on YouTube

Many of the items I used for this build are listed below on eBay. As an eBay Partner, I may be compensated if you make a purchase.


Kit:

Element Enduro Builder's Kit - https://ebay.to/3b4JSYs (eBay)


Parts:

Rock Pirates RC Rear Shock Towers - https://rockpiratesrc.com/products/rear-shock-towers-for-scx10-ii-elements
Rock Pirates RC Power Wagon Sliders - https://rockpiratesrc.com/products/pro-line-power-wagon-sliders
Rock Pirates RC Battery Tray - https://rockpiratesrc.com/products/battery-tray-for-elements-scx10-ii
SSD RC Brass Enduro Link Mounts - https://ebay.us/ibNDD3 (eBay)
SSD RC Brass Enduro Diff Cover - https://ebay.us/lEja5x (eBay)
SSD RC Brass Enduro Knuckles - https://ebay.us/NKhpqp (eBay)
SSD RC Aluminum Enduro C-Hubs - https://ebay.us/TbxkV1 (eBay)
Club 5 Racing Shock Bushings - https://ebay.us/IRvvBV
Club 5 Racing High Clearance links - https://ebay.us/iq2RBg
Brazin Scale RC Enduro Shock Towers - https://www.brazinscalerc.com/components/element-shock-hoops-builders-series
Hardcore RC Enduro Offset Panhard Link - https://hardcore-rc.ecwid.com/ELEMENT-ENDURO-OFFSET-PANHARD-p145908627
Junfac Driveshafts for Enduro - https://ebay.us/8XRBtD
1.9" Beadlock wheels - https://ebay.us/ccqxpL | https://s.click.aliexpress.com/e/_974jUM
Club 5 Racing +6mm RhinoHub - https://ebay.us/93eR9n
Pro-Line 1.9 BFG Krawlers G8 Compound - https://ebay.to/3pe9qrt
Pro-Line Dual Stage Foam - https://ebay.to/3jIoCM6
Samix 8mm Brass Wheel Hexes - https://ebay.us/VbjgD5


Electronics:

FlySky GT5 Radio - https://ebay.us/WWRQio
FlySky FS-BS6 Receiver - https://ebay.us/e1uXOI
Hobbywing Quicrun Fusion 1800kv - https://ebay.us/p0rEsi
HobbyStar 3700 Mah 3S Lipo - https://ebay.us/L6jCJ6
myTrickRC LED Wafer Lights - https://mytrickrc.com/collections/leds
Armory RC 500oz Servo - https://www.armoryrchobbies.com/product/armory-rc-katana-500-servo


Tools/Supplies:

Versachem Brake Caliper Grease - https://ebay.to/3p8bIZ7
Noleen SF3 Grease (available on eBay) - https://ebay.to/3jN9vB9
Permatex Anti Seize Lubricant (ebay) - https://ebay.to/3qpTbsN
Associated 1656 FT 1/4 in Driver Handle - https://ebay.to/3d31t5O
Tamiya Side Cutter - https://ebay.to/371SAWb
DEWALT DCF610S2R 12V MAX Cordless Lithium-Ion 1/4 in. Hex Chuck Screwdriver Kit - https://ebay.to/3tQqXcr
MIP Metric Speed Tip Set MIP9512 - https://ebay.to/3qdBMTU
Bob Smith Industries Blue Thread Locker - https://ebay.to/3jDR8i9
ProTek RC Shock Pliers (available on eBay) - https://ebay.to/372Lscs
Duratrax Shock stand - https://ebay.to/2MOyJ6l
Hakko FX-888D Soldering Station - https://ebay.to/3aXFmLj
Multistar Rubber R/C Work mat - https://bit.ly/2T3F4Zo
IWISS Crimping Tool - https://ebay.to/3jGKZll
Universal Servo Cable Wire Connector Crimp Pin Kit - https://ebay.to/3tSAAaW
E6000 Adhesive - https://ebay.to/2MZwtZV

 

[soze]

Once again, I'm starting this build thread by showing the build following the manual before I start doing upgrades and customization.

Part 1 - Main Chassis

You'll need Bags 1 and 2

Gate 1

Parts Needed

Completed

Gate 2

Parts Needed

Completed

Gate 3

Parts Needed

Completed

 

[soze]

Part 2 - Electronics

For this part, you'll need your choice of electronics. At the time of building, I didn't have the electronics that I wanted to use figured out yet, so for the time being, I used the stock electronics from my Element Enduro Sendero RTR.

Gate 1:

Parts Needed

Completed

Gate 2:

Parts Needed

Completed

Gate 3:

Parts needed

Completed

 

[soze]

Part 3 - Transmission

For this part, you'll need Bag 4

Gate 1:

Parts Needed

You'll need to choose which Overdrive gear set you wish to use. 27/53 (5.7%) or 26/54 (11.83%)

Completed

Gate 2:

Parts Needed

Completed

Gate 3:

Parts Needed

Completed

Gate 4:

Parts Needed

Completed

 

[soze]

Part 4 - Axles

For this part, you'll need bags 5 and 6.

Front Axle

Gate 1:

Parts Needed

Completed

Gate 2:

Parts Needed

Completed

Gate 3:

Parts Needed

Completed

Rear Axle

Gate 1:

Parts Needed

Completed

Gate 2:

Parts Needed

Completed

Front and Rear Axles Completed

 

[soze]

Part 5 - Links and Driveshafts

For this part, you'll need bag 7 and 8

Links

Gate 1:

Parts Needed

Completed

Gate 2:

Parts Needed

Completed

Gate 3:

Parts Needed

Completed

Gate 4:

Parts Needed

Completed

Gate 5:

Parts Needed

Completed

Gate 6:

Parts Needed

Completed

Gate 7:

Parts Needed

Completed

Drive Shafts

Gate 1:

Parts Needed

Completed

Gates 2 & 3:

Completed

 

[soze]

Part 6 - Shocks and Kit Completion

Shocks:

For this part, you'll need bag 9

Gate 1:

Parts Needed

Gate 2:

I will be using Noleen SF-3 Grease and Associated Factory Team 40wt Shock Oil

Gate 3:

Parts Needed

Completed

Gate 4:

Parts Needed

Make sure you make note of which are pivot balls, and which are shock standoffs

Completed

I love these shocks. They're so silky smooth. Hands down my favorite shocks.


Body Posts:

For this part you'll need bag 10

Gate 1:

Parts Needed

I did not end up completing this step, as I need to do body fitting before going futher. I haven't even decided what body to use!

 

[meatmonkey]

Appreciate the play by play coverage.

Funny how we take electronics out of one rig because they "need upgrading", yet there still plenty good to get the next project running.

 

[smog]

Awesome, I just love my Enduro. Honestly, a huge part of that is likely the shocks. I can’t disagree with your statement, they are definitely the best crawler shocks I have run. How exactly are you using the suspension grease?

 

[soze]

Awesome, I just love my Enduro. Honestly, a huge part of that is likely the shocks. I can’t disagree with your statement, they are definitely the best crawler shocks I have run. How exactly are you using the suspension grease?

The suspension grease is basically "green slime". I use it on the O-rings. At the bottom of the shock body, in the shock cap, even on the shock adjuster to help it move smoothly.


My problem right now is that I'm working on this rig, and building a Gatekeeper concurrently. I'll be putting my Gatekeeper build thread up soon as well, but that build will likely finish before this build.

 

[smog]

My problem right now is that I'm working on this rig, and building a Gatekeeper concurrently. I'll be putting my Gatekeeper build thread up soon as well, but that build will likely finish before this build.

Element junkie

 

[GA Dawg]

Funny how we take electronics out of one rig because they "need upgrading", yet there still plenty good to get the next project running.

That's how I fly under the radar on my household budget. My wife would shit if I spent a grand right off the bat, but as long as I get it up and running as cheaply as possible, all of the upgrades don't raise any questions.

 

[soze]

Element junkie

Yeah I have become one I guess....

They've made enough variations to keep things interesting and different enough to want to run multiple setups.

Overall though, my MO is to pretty much try at least 1 of each platform. I've got a GMADE GS02F sitting here waiting for me to complete my 2 Element projects, along with upgrades planned for all my other brand rigs.

I do need to start selling some of them off though...

 

[bluecusion]

Yeah I have become one I guess....

They've made enough variations to keep things interesting and different enough to want to run multiple setups.

Overall though, my MO is to pretty much try at least 1 of each platform. I've got a GMADE GS02F sitting here waiting for me to complete my 2 Element projects, along with upgrades planned for all my other brand rigs.

I do need to start selling some of them off though...

Wait, i thought gs02f is not available yet..? How did you get yours so fast?

 

[soze]

Wait, i thought gs02f is not available yet..? How did you get yours so fast?

Ordered from junfac.

Sent from my SM-G975U using Tapatalk

 

[bluecusion]

Ordered from junfac.

Sent from my SM-G975U using Tapatalk

Nice, what body are you thinking of going with this builders kit?

Cant wait to see your process of modding it.

 

[soze]

Nice, what body are you thinking of going with this builders kit?

Cant wait to see your process of modding it.

I think I might go with the MST JP1 or J45.

 

[Yto1312]

Hi all I'm new to this forum... Just so happen that i've just bought the enduro kit.
Planning for an upgrade for the build. Any suggestions whats the most important parts to upgrade first?
Btw thanks soze for the build videos. Its like a heads up sneak preview before i build mine.

 

[soze]

Hi all I'm new to this forum... Just so happen that i've just bought the enduro kit.
Planning for an upgrade for the build. Any suggestions whats the most important parts to upgrade first?
Btw thanks soze for the build videos. Its like a heads up sneak preview before i build mine.

You don't really need to upgrade anything yet if you got the kit.

Just add some front weight, some of those 3d printed chassis braces, and maybe later on change the links and add metal pivot balls.

After you drive it for a bit, then you can start looking at what else you want to change.

 

[Yto1312]

Nice thanks soze.