• Welcome to RCCrawler Forums.

    It looks like you're enjoying RCCrawler's Forums but haven't created an account yet. Why not take a minute to register for your own free account now? As a member you get free access to all of our forums and posts plus the ability to post your own messages, communicate directly with other members, and much more. Register now!

    Already a member? Login at the top of this page to stop seeing this message.

My dlux hall style berg rebuild

While the weather was bad the past few days i decided to check into some binding i had going on in my steering. so i made these new top hat bushings and now everything is butter.
133.jpg

here are a couple shots of the car while doing some testing today.
010-1.jpg

006-1.jpg

005-3.jpg

001-4.jpg
 
The top hats look sick man great job.
I wish I would have had time to crawl this weekend. Nice to see you got on the rocks for a bit.
 
Why yes they are pumice rocks. We have a bunch of pumice at the BYB compound from our pals at CASCADE ROCK.
Very nice! We've got a few of them in our club's course as well. I hadn't seen any other courses built with them before..."thumbsup"
 
Holly crap Geo thats worse then you made it sound on the phone. thats what happens when you let Raul put in the drain I saw the pic of him just holding the shovel:lmao:

At least the rocks will be really clean for tonight"thumbsup"
 
So iv been slowly trying to reduce the weight of the car. The car is around 4lb11oz and id like to try the 4lb 8oz mark. This is what she looked like at the start to the weekend.
004.jpg

005-4.jpg

006-2.jpg

007-2.jpg


I started by taking some grams off my hubs by putting them in the lathe. And i also drilled the hubs out and put 3mm Aluminum screws. A pic of before.

008-3.jpg

and after
010-2.jpg
 
When i took the body panels off i saw a bunch of stuff i could remove to save weight. Here is what it looked like.
014-1.jpg


Thats when my chassis builder said we cant have this. The hippy Mr.Hallstyle him self has brought me up to date with some of this space age carbon fiber stuff. This is the 2nd hand cut carbon chassis that John has made. He built himself one about a month ago now i am stoked to get the only other one out there. Here is a pic of my old chassis and its weight at 115.9g
015.jpg


and the new and improved Hallstyle and its weight at 65.4g
016.jpg


Thats where i saved most of the weight.
 
A few shots of the sickest chassis out there.
018-2.jpg

019-1.jpg

020-1.jpg


So with the new chassis i figured i needed to move the electronics out of the chassis. So i got Jake to come give me a hand redoing them. He Made everything nice and tight.
OLD look
022-1.jpg

1.96oz is what they weighed
024.jpg

new and improved at 1.38oz
025.jpg
 
Ill get to test her out tomorrow night and see how all this works. Here are some shots of it all together. Now she weighs in at 4lb8.3oz
027-1.jpg

029-1.jpg

030.jpg

032-1.jpg

033-1.jpg

035-1.jpg

036-1.jpg

037-1.jpg

038.jpg
 
Back
Top