Michigan Roll Call

[saul]

ill go ....

lhs still dont have my links or my 2/3 cells in ..arg

the ax 10 has caused a back order of normal parts

 

[Crawlerguy851]

I'm finally going to competitively be in the 2.2 class. Just got my hands on a pair of WK axles.

 

[1badduk]

so sunday it is about what time?

 

[scalecrawler]

Hey guys, I was wondering is this like real rock comps? I was jsut wondering because I get my Drivers license soon and was thinking about coming to check it out, and I am in the middle of building a sweet little comp rig to mess around with but it would be sweet to do some real competitions.
Or is the competitions just like for fun not real competetive?

A long while ago I tried to meet up with you guys like when it was just Get 2 gethers, but It got rained out and I didnt have anyway of getting ahold of anyone.

 

[saul]

im pretty sure this will just be a crawl for the fun of it....

but im sure once we all get together a few times we can hammer out a real comp some time

bill over at dirt burners is talking about building an indoor crawl
not sure how serius he was ..but we will c

 

[JUSTGOINGSLOW]

im pretty sure this will just be a crawl for the fun of it....

but im sure once we all get together a few times we can hammer out a real comp some time

bill over at dirt burners is talking about building an indoor crawl
not sure how serius he was ..but we will c

Where will bill put it ? not in that building no room

 

[saul]

not sure...he was talkin bout it last week

said he would like to build an indoor rock crawl...


ill ask him on friday when i pick up my next project


starting a super
:twisted::twisted:

 

[1badduk]

I'm down to go I just am trying to figger out how I'm going to get out there

 

[saul]

where u live? im at wixom and glengary i can give ya a lift

 

[JUSTGOINGSLOW]

I would like to go just so I know who's who and meet all you guys

 

[saul]

yeh..thats mostly why im going....im not much for cold weather ...guess im in the wrong state ...but anyway um i heard someone say like 1pm ish?


ill be bringing my ax that for some reason is sitting at 12.55 wb....grrr...where the hell did that extra .05 come from i have no clue but its there

and maybee a mostly stock clod depending on how much sleep i give up to build it

 

[JUSTGOINGSLOW]

yeh..thats mostly why im going....im not much for cold weather ...guess im in the wrong state ...but anyway um i heard someone say like 1pm ish?


ill be bringing my ax that for some reason is sitting at 12.55 wb....grrr...where the hell did that extra .05 come from i have no clue but its there

and maybee a mostly stock clod depending on how much sleep i give up to build it

They where talking around 1pm Sunday. I would'nt worry about .5 of an inch Its cool with me

 

[saul]

yeh..not to worried for now..just really confused as to where it came from ...and its .05 guess i need a little sand paper on the end of my links

 

[JUSTGOINGSLOW]

Are they all stock links

 

[saul]

got bent links on both ends

from what i have red on here ...i should be at 12.5 even

my only thing is i have not installed the 70 mill uppers as they have not come in yet

so im using a little spacer on the Y link on the front and rear to add a bit of length on the upper so it will fit

not sure if this has leaned the axle forward or not adding the lenght

will find out when the links come in

and that brings me to the reason im starting a super



5b waiting on rear shock towers

axial waiting on 70 mill links

need another project so i have at least some chance of not waitng on parts for one of em

 

[JUSTGOINGSLOW]

I did a stage 2 and made my own 70mm upper links and also put big bores on it to lower it down and i'm just a little under 12.5. But I'm not running bent links. There where a few guys on here that said with the bent links it made it a little over 12.5 :?:

 

[saul]

how did u make your 70s? i have the stock lowers and im wondering if i can just cut them down to 70 mill

and i think i can shave down the bent links on my dremel to get my lenght right but dont want to mod till i get the 70s in and find out if thats causeing my issue

and this is basicly the stage 2 ..i just did it with parts from dirt burners
but the 70s are back order till the end of the month

 

[binaryterror]

Larry's had the Axial 70mm links in stock Friday night...give em a call they might still have them.

 

[JUSTGOINGSLOW]

how did u make your 70s? i have the stock lowers and im wondering if i can just cut them down to 70 mill

and i think i can shave down the bent links on my dremel to get my lenght right but dont want to mod till i get the 70s in and find out if thats causeing my issue

and this is basicly the stage 2 ..i just did it with parts from dirt burners
but the 70s are back order till the end of the month

Grab your self a tubing cutter and a 3mm tap and go to town and if you don't have them Ido I can make them for you

 

[saul]

when where u wanna hook up?

i been waiting like 3 weeks already ..its killin me