Members' Rides - No talking

[iwantoffroad]

sw2 comp rig

hummer

highlift

clod

waterproof rig

 

[brueblue]

custom strait axle duratrax diffs

[/URL] [/IMG]This is crawler I built after all my buddys got axle scorpions.

 

[blazinchuck]

here's my only junk right now...cheap a$$ new bright. I built the chassis,Chuck

 

[mysharona]

Axial AX10
Integy CF Chassis
Tcs four link mounts, servo front, boomerang rear.
losi rock claws
hpi bug body
TCS knuckle packs
novak rooster crawler
Integy 45t V11
towerpro 945 steering servo
stock gearing
Front dig
inboard mounted lower links
4oz of lead in each front wheel
stock shocks set up in droop fashion
DX3R

 

[Ax-hole]

Truck Base :Scorpion

ESC:Goat

Motor(s):Goat 18.5

Servo(s):Hitec 645mg (7955 tg soon)

Trans:stock axial

Axles:axial with rcp straight axle, alum c's and knuckles

Tires:Imex Swamp Dawgs

WB:12.5"

Overall Width:10.25"

Diff clearance:1.5"

Center Chassis clearance:2.5"

Overall height:9.5"

Remote operated lights, full interior, custom made folding side mirrors, 427 Corvette engine.
http://www.rccrawler.com/forum/showthread.php?t=111081

 

[JBHardwear]

Here are some of my rides, with more to come.

This is my comp 2.2
AX10
INTEGY 55T
NOVAK ROOSTER CRAWLER ESC
CUSTOM SUSPENSION AND CHASSIS WORK

Next is my trail rig
AX10
INTEGY 45T
ROOSTER ESC
CUSTOM CHASSIS AND SUSPENSION WORK

This is my back up rig. She is brand new never driven.
AX10
INTEGY 55T
ROSTER ESC ORDERED
STOCK EVERYTHING

This is my 1.9 scaler/tow rig
Tamiya F-350 High Lift
Stock Steel Can Motor
Rooster Crawler ESC
RC4WD Bead Locks
1.9 Mud Slingers

Here is a sneak peak at my up and coming trail rig project

And still to come this month,
Custom High Lift and PTI Goliath

 

[CoNCePT76]

My Hustler

I love this sport


Truck Base : Hustler

ESC: Mambas

Radio: DX6i

Receiver:AR6200 w/ satellite

Battery: Flight Power 2500 11.1v w/ Cc BEC

Motor(s): 2x BM16

Servo(s): 2x Hitech 5955TG

Trans: S.Clod w/ Integy gears

Axles: Thundertech CVD, JP Knuckles. Losi Lst2 17mm hubs w/ lock nuts (Not shown Integy Axle tubes)

Tires: Moab 40 XL

WB: 17in

 

[AdverseCity]

Some of this will change as I can afford it.....

Chassis
- Unitek Spider (on EBay)
- Made from ¼" lexan

Suspension - Came with chassis
- Solid aluminum 4 link
- Shocks unknown, comparable to stock T-Maxx shocks

Axles - Came with chassis
- Machined from solid T6061 Aluminum
- Hardened stainless steel axleshafts and internal gears

Gearbox - Came with chassis
- Case machined in T6061 Aluminum
- Hardened stainless steel internal gears

Driveshafts - Came with chassis
- CV slider shafts made from Aluminum and hardened stainless steel

Wheels / tires
- Axial narrowed beadlocks / Losi rock claws

ESC
- Novak Rooster crawler edition

Reciever
- Traxxas 3 channel micro receiver

Transmitter
- Traxxas TQ 2 channel

Motor
- Novak high torque expert 55T

Servo
- Hitec HS5645MG, aluminum servo arm and custom draglink steering

Wheelbase - 17"

Ground clearance
- 2 3/8" at lowest point (center of axle)
- 3 3/4" at center of chassis

Width
- 16" outside of tires
- 11" hex to hex

Height
- 8" to top of chassis without body mounts
- 10" to top of body

 

[bwcrwlr]

This is my rig, it's an AX-10 with an edge chassis, a Rooster ESC, a Matrix 55 motor, and Proline wheels with Losi Rock Claws

 

[andy27012]

My AX-10

My first crawler!!! It was a ton of fun to build. It is still all stock I am trying to decide between a tuber and the helios body. I like the tuber better but I am concerned about ease of getting it off and on to exchange the battery. Any suggestions would be appreciated.

Truck Base :Axial AX-10 Stage 1

ESCynamite Tazer 15t

Motor(s):Integy 55t

Servo(s):Hitec HS 645MG

Trans:Stock

Axles:Stock

Tires:Stock

WB:Stock

Overall Width:7.1"

Diff clearance:Stock

Center Chassis clearance:Stock

Overall height:5.25"

Pictures

 

[dkur]

This was my first attempt at building a crawler. SUCCESS!!!!! "thumbsup" I love my truck!!! It climbs very well. The frame and links are all custom designed and built by me. A lot of trial and error went into this puppy but the outcome is EXCELLENT! Hey. . . for a newbie first timer I did alright.

Truck Base : ClodBuster

ESC: Novak Rooster Crawler Edition

Motor(s): 2-75 turn Integy lathe motors

Servo(s): 2-Hitech 645mg's

Trans: No tranny. . . . . IT'S a CLOD!!!!!!!

Axles: ClodBuster with full bearings

Tires: Weighted Juggernaut tires on chrome bullet wheels

WB: 19"

Overall Width: 14"

Diff clearance: 2-2 1/2"

Center Chassis clearance: 7"

Overall height: 13"

Look at that clear blue Wyoming sky behind my truck! What an awesome pic. Thanks goes to Joel from our RC club for taking that pic. http://www.windycityrc.com/Home_Page.html

Here's my AX10 at a comp just last Saturday. New body and tires.

Here's my Super Crawler sporting a new body tires and wheels also at a comp last saturday.

I thought I would add my newest crawler to list of crawlers. Basic AX10 with custom chassis.

 

[dkur]

okay now. . . . . I couldn't stop at building one rock crawler. Can you?!?!?!?! Here is my second crawler. It is an AX10. You just can't beat an AX10. It is an awesome crawler and whole lotta fun to build to boot. I love the old Power Wagon body. I remember driving the old Power Wagon out on the ranch when I was a kid. What a hoot. Driving the crawler is pretty much the same, super slow and full of tenacious power!!!

I modified the lower links to get more ground clearance and still protect the driveshafts. Other than that "Betty" is stock.

Truck Base : AX10

ESC: Novak Rooster Crawler Edition

Motor: 65 turn Integy lathe motor

Servo(s): 2-traxxas 2055's. I have four wheel steering.

Trans: Stock AX10 tranny

Axles: Stock AX10 axles

Tires: Stock Rock Lizards on stock beadlocks

WB:12.5"

Overall Width: 10.5"

Diff clearance: 1 1/2" - 2"

Center Chassis clearance: 4"

Overall height: 10"

 

[breitenbach14]

no pics right now dont have a cam but in about 3 days ill have some,
im in the process of building a tube chassis
Truck Base : axial

ESC: rooster "not the crawler edition"

Motor:integy 55t

Servo:hi-tec 5955tg

Trans: stock

Axles:stock

Tires: stock with about 4oz inn the front tires

WB: 12.5"

Overall Width:stock

Diff clearance: stock

Center Chassis clearance:3"

clod with claw chassis will post pics when i get me camera
not bad for 18$ huh?

 

[SupaMan]

Truck Base : HPI wheely king

ESC: Duratrax intellispeed 16t

Motor(s): Integy 65T

Servo(s): Scanner RC SSV-9764MG (x2)

Trans: Stock WK locked slipper

Axles: Stock WK with rcguy lockers

Tires: Stock WK with cut lugs

WB: 11''

Overall Width: 13 3/4''

Diff clearance: 1 1/2''

Center Chassis clearance: 2 3/4''

Overall height:11 1/4''

 

[james22]

this is my chassis based off ax10 rc4wd silver tranny 75t motor 4500 orion battery punisher drivelines this was my first build next one coming soon

 

[pitass]

Truck Base : Savage

ESC: Evader ST

Motor(s): Novak 55T

Servo(s): Savage

Trans: Savage

Axles: Savage

Tires: Maxx Muchlers

WB: 17"

Overall Width: 17"

Diff clearance: 2.5"

Center Chassis clearance: 3.5"

Overall height:10"

 

[phatomstranger]

wheelie king axels, wheelie king trans,55 turn lathe motor, not finished yet need nerf bars and cage,body

 

[mexiCAN]

mr. pink/rc4wd tuber

 

[Rustlerguy]

heres a pic of my traxxas rustler

if you want to see more go to non crawler rigs its under traxxas rustler

 

[hardhead]

my junk

55t soft springs blah blah blah 8)