-
Welcome to RCCrawler Forums.
It looks like you're enjoying RCCrawler's Forums but haven't created an account yet. Why not take a minute to register for your own free account now? As a member you get free access to all of our forums and posts plus the ability to post your own messages, communicate directly with other members, and much more. Register now!
Already a member? Login at the top of this page to stop seeing this message.
Members' Rides - No talking
- Thread starter TwistedCreations
- Start date
Lvninprds
Newbie
My new rbx tlt!!
MY new rbx chassis i bought off of Turbo_Deisel. It's pretty sweet, i think, considering i had a mostly stock tlt
. 12t pinion, 87t spur, maxx shocks, aluminum to come, sticky weights all the way around front rims, usual star cut foams, one hole. Had to modify the drive shafts, modified the trans to sit flat with no spacers. OH!!! I want to thank robvbro81 for the helpfull info. and the help in selecting the parts to build this truck. The crawler store for making kick *** wideners, and for my tq3 Tx and Rx. I especially want to thank my girlfriend whom i love very much and whom i intend to marry, for all the patiance and help, despite her hate for my hobby, and for not chopping off anything that's attached for all the money i spent.
Truck Base : TLT
ESC: Tekin Rebel 2
Motor(s): Integy 65t lathe
Servo(s): Dual(4WS) HiTec HS-5625MG
Trans: Pede
Axles: TLT w/traxxas pede axles cut w/2females glued male, gmade wideners
Tires: Moabs mounted on narrowed 2.2 duratrax wheels
WB: 12.25"
Overall Width: 10.5"
Diff clearance: 1.75"
Center Chassis clearance: 3.5"
Overall height 11"
MY new rbx chassis i bought off of Turbo_Deisel. It's pretty sweet, i think, considering i had a mostly stock tlt
. 12t pinion, 87t spur, maxx shocks, aluminum to come, sticky weights all the way around front rims, usual star cut foams, one hole. Had to modify the drive shafts, modified the trans to sit flat with no spacers. OH!!! I want to thank robvbro81 for the helpfull info. and the help in selecting the parts to build this truck. The crawler store for making kick *** wideners, and for my tq3 Tx and Rx. I especially want to thank my girlfriend whom i love very much and whom i intend to marry, for all the patiance and help, despite her hate for my hobby, and for not chopping off anything that's attached for all the money i spent.Truck Base : TLT
ESC: Tekin Rebel 2
Motor(s): Integy 65t lathe
Servo(s): Dual(4WS) HiTec HS-5625MG
Trans: Pede
Axles: TLT w/traxxas pede axles cut w/2females glued male, gmade wideners
Tires: Moabs mounted on narrowed 2.2 duratrax wheels
WB: 12.25"
Overall Width: 10.5"
Diff clearance: 1.75"
Center Chassis clearance: 3.5"
Overall height 11"
Attachments
Last edited:
TLT1 Tuber
Here's my new tuber, many of you may be familiar with this tuber. I bought it recently, and thought I'd post a few pics for the people that may not have seen it.
TLT1 Axles locked and shaved, king blackfoot half shafts, shaved down for max steering, and to give the truck a wider stance.
Novak Super rooster ESC.
Stampede locked trans.
Integy piggyback shocks.
JR 650 z Servo.
HPI 5 star wheels with Rckjeeps second gen rock rings, proline masher 2ks.
Solid tube chassis
Here's my new tuber, many of you may be familiar with this tuber. I bought it recently, and thought I'd post a few pics for the people that may not have seen it.
TLT1 Axles locked and shaved, king blackfoot half shafts, shaved down for max steering, and to give the truck a wider stance.
Novak Super rooster ESC.
Stampede locked trans.
Integy piggyback shocks.
JR 650 z Servo.
HPI 5 star wheels with Rckjeeps second gen rock rings, proline masher 2ks.
Solid tube chassis
Last edited:
mt_power
Pebble Pounder
Here's mine.
Truck Base: Kyosho Mad Force
ESC: EXR PRO - soon a waterproof esc from LRP
Motor(s): Tracker 2 stock motor
Servo(s): Frontsteering: Dymond 7500 rearsteering: Futaba S3010
Trans: Tracker 2 transmission with a GD600 reducingbox
Axles: Locked MF/TF axels
Tires: Savage's
WB: 15.5"
Overall Width: 14.5"
Diff clearance: I don't know
Center Chassis clearance: 4.7"
Overall height: I don't know
Truck Base: Kyosho Mad Force
ESC: EXR PRO - soon a waterproof esc from LRP
Motor(s): Tracker 2 stock motor
Servo(s): Frontsteering: Dymond 7500 rearsteering: Futaba S3010
Trans: Tracker 2 transmission with a GD600 reducingbox
Axles: Locked MF/TF axels
Tires: Savage's
WB: 15.5"
Overall Width: 14.5"
Diff clearance: I don't know
Center Chassis clearance: 4.7"
Overall height: I don't know
Last edited:
FFRCJosh
Quarry Creeper
ESC: Associated LRP Quantum Forward/ Reverse
Motor: Integy 45T Lathe with 12T Pinion
Servo: HS-645MG
Trans: Stampede Tranny with 87T Spur locked with JB Weld
Axles: TLT Axles Locked with JB Weld
Tires: Pro-Line 2.2 Moabs on single narrowed black traxxas wheels
WB: 12.5"
Chassis: BENDER Custom's SW2
Motor: Integy 45T Lathe with 12T Pinion
Servo: HS-645MG
Trans: Stampede Tranny with 87T Spur locked with JB Weld
Axles: TLT Axles Locked with JB Weld
Tires: Pro-Line 2.2 Moabs on single narrowed black traxxas wheels
WB: 12.5"
Chassis: BENDER Custom's SW2
dezfan
I wanna be Dave
CrawlAZ
Pebble Pounder
unfortunately wheelbase is like 12.8" :sad: I will change that soon enough.
Truck Base : Bender Customs SW2
ESC:LRP Bullit Reverse
Motor(s):Integy 55t lathe
Servo(s):some crappy JR
Trans: pede
Axles: TLT
Tires: crap stock, soon to be MOABS
WB: 12.8"
Overall Width: 9.8"
Diff clearance: 1 1/4"
Center Chassis clearance: 3"
Overall height: 6.5" w/out body.
Truck Base : Bender Customs SW2
ESC:LRP Bullit Reverse
Motor(s):Integy 55t lathe
Servo(s):some crappy JR
Trans: pede
Axles: TLT
Tires: crap stock, soon to be MOABS
WB: 12.8"
Overall Width: 9.8"
Diff clearance: 1 1/4"
Center Chassis clearance: 3"
Overall height: 6.5" w/out body.
K_B
I wanna be Dave
PTI Goliath Crawler
Truck Base : PTI Goliath (stock chassis)
ESC: Quark Pro-Car 33A
Motor(s): AXI 2212/26
Servo(s): Hitec HS-645-MG
Trans: Transmission? Well, it's the stock "tranny" which just consists of a 13T pinion and 88T spur (GD-600 coming soon)
Axles: PTI
Tires: Pro-Line Moab
WB: 12"
Overall Width: 10"
Diff clearance: 1"
Center Chassis clearance: 3"
Overall height: 6.5"
Since these pics were taken I've relocated the servo and installed yellow springs all around.
Truck Base : PTI Goliath (stock chassis)
ESC: Quark Pro-Car 33A
Motor(s): AXI 2212/26
Servo(s): Hitec HS-645-MG
Trans: Transmission? Well, it's the stock "tranny" which just consists of a 13T pinion and 88T spur (GD-600 coming soon)
Axles: PTI
Tires: Pro-Line Moab
WB: 12"
Overall Width: 10"
Diff clearance: 1"
Center Chassis clearance: 3"
Overall height: 6.5"
Since these pics were taken I've relocated the servo and installed yellow springs all around.
Attachments
Last edited:
F
Flex
Guest
Just Another 2.2
ROAR CHASSIS
TRAXXAS LINKS
TRAXXAS SLIDERS
MAXX SHOCKS
55 TURN LATHE
SLOWER THAN SNOT ON A COLD DAY, TORQUEY AS A FAT GIRL CHASING A DOUGHNUT
ROAR CHASSIS
TRAXXAS LINKS
TRAXXAS SLIDERS
MAXX SHOCKS
55 TURN LATHE
SLOWER THAN SNOT ON A COLD DAY, TORQUEY AS A FAT GIRL CHASING A DOUGHNUT
Flash Burns
Pebble Pounder
My New CPE Crawler
She's hittin' the rocks this weekend!!!
She's hittin' the rocks this weekend!!!
Last edited:
Link
Quarry Creeper
mr.maxx
Quarry Creeper
The fleet
Maxx
Custom Chassis
18 1/2" WB
55T
Moped
Locked trans in 1st
F&R Spools
4 WS & 2 Hitec 645s
Imexs with 8oz of BBs in each front wheel
Clod
Junfac Chassis
16" WB
Dual 55T - 9t pinions
Rebel 2
Locked F&R
4 WS & 2 Hitec 645s
TLT
Cut down stock Chassis
12" WB
55T
Duratrax 8T reversable
Locked F&R
Pede Trans
Pede sliders
Maxx Shocks
2055 Servo
Dirt Hawgs with BBs in the front
Maxx
Custom Chassis
18 1/2" WB
55T
Moped
Locked trans in 1st
F&R Spools
4 WS & 2 Hitec 645s
Imexs with 8oz of BBs in each front wheel
Clod
Junfac Chassis
16" WB
Dual 55T - 9t pinions
Rebel 2
Locked F&R
4 WS & 2 Hitec 645s
TLT
Cut down stock Chassis
12" WB
55T
Duratrax 8T reversable
Locked F&R
Pede Trans
Pede sliders
Maxx Shocks
2055 Servo
Dirt Hawgs with BBs in the front
Attachments
zjguy721
Rock Crawler
Here it is, finally:
Truck Base : Bender SW2
ESC: Moped V16R
Motor(s): Integy 55t
Servo(s): Hitec 645MG
Trans: Pede 87t Kimbrough/12t pinion, JB locked
Axles: TLT, JB locked, g-made wideners, shaved
Shocks: Associated aluminum, Losi springs, inverted, 20wt/white front, 30wt/red rr, 40wt/silver lr
Links: Delrin, 5/16 lowers, 1/4 uppers and steering Traxxas ends, 55/45
Tires: Pro-Line M2K
Wheels: HPI Black Mesh, narrowed to 42mm, washers shoogooed to inside and Unimoger Scaler rock rings, cut foams
Shafts: Pede sliders, female-male-female with metal yokes on both ends
WB: 12.5
Overall Width: 11
Center Chassis clearance: 2 3/4
Overall height: 9
Truck Base : Bender SW2
ESC: Moped V16R
Motor(s): Integy 55t
Servo(s): Hitec 645MG
Trans: Pede 87t Kimbrough/12t pinion, JB locked
Axles: TLT, JB locked, g-made wideners, shaved
Shocks: Associated aluminum, Losi springs, inverted, 20wt/white front, 30wt/red rr, 40wt/silver lr
Links: Delrin, 5/16 lowers, 1/4 uppers and steering Traxxas ends, 55/45
Tires: Pro-Line M2K
Wheels: HPI Black Mesh, narrowed to 42mm, washers shoogooed to inside and Unimoger Scaler rock rings, cut foams
Shafts: Pede sliders, female-male-female with metal yokes on both ends
WB: 12.5
Overall Width: 11
Center Chassis clearance: 2 3/4
Overall height: 9
Attachments
Truck Base : CPE-EVO16
ESC: Tekin Rebel 2
Motor(s): Integy 55t
Servo(s): 2x Hitec 645MG for true 4WS
Trans: Clodbuster
Axles: Clodbuster with CPE axle stiffeners
Shocks: Traxxas Big Bore
Links: CPE
Tires: Stock Clod
Wheels: Stock Clod
Shafts: N/A
WB: 16
Overall Width: 16
Center Chassis clearance: 4
Overall height: 15 w/body
ESC: Tekin Rebel 2
Motor(s): Integy 55t
Servo(s): 2x Hitec 645MG for true 4WS
Trans: Clodbuster
Axles: Clodbuster with CPE axle stiffeners
Shocks: Traxxas Big Bore
Links: CPE
Tires: Stock Clod
Wheels: Stock Clod
Shafts: N/A
WB: 16
Overall Width: 16
Center Chassis clearance: 4
Overall height: 15 w/body
War Pig
I wanna be Dave
Truck Base: TS Designs stainless w/carrier bearing rear driveline
ESC: Rebel 2
Motor: Kyosho Mag Mayhem
Servo: Airtronics 359
Tranny: Stampede
Axles: TLT
Tires: Masher 2k w/cut tread
Wheelbase: 13.5 in.
Width: 10.5 in.
Belly clearance: 2.5 in.
Overall height: 9.75 in.
Special features: 3 link rear end
3/16" stainless links
Paint took 14 hours to complete
Custom stainless grill and brass bumper
Suspension has since been lowered, it just works better that way.
ESC: Rebel 2
Motor: Kyosho Mag Mayhem
Servo: Airtronics 359
Tranny: Stampede
Axles: TLT
Tires: Masher 2k w/cut tread
Wheelbase: 13.5 in.
Width: 10.5 in.
Belly clearance: 2.5 in.
Overall height: 9.75 in.
Special features: 3 link rear end
3/16" stainless links
Paint took 14 hours to complete
Custom stainless grill and brass bumper
Suspension has since been lowered, it just works better that way.
pvtjrt01550
Quarry Creeper
Truck Base : Nylint 18th Scale
ESC:Stock
Motor(s):Stock
Servo(s):Stock
Trans:Beefed Up Stock
Axles:Beefed Up Stock
Tires:2.2 Masher 2k
WB:12.5"
Overall Width:10.5"
Diff clearance:2.3"
Center Chassis clearance:4"
Overall height:?
eyerace
Newbie
Truck Base : TLT-1
ESC: Moped
Motor(s): 65t
Servo(s): HXT12K (MG995) 12kg Metal Gear Twin Bearing Servo
Trans: Stealth B4, Revo Shafts
Axles: TLT, Xtreme RC Hobbies axle ends, 32mm Tobee Craft Wideners
Tires: 2.2 Xtreme Red Rocks, 2.2 Xtreme RPM Wheels
WB: 15in
Overall Width: 12in
ESC: Moped
Motor(s): 65t
Servo(s): HXT12K (MG995) 12kg Metal Gear Twin Bearing Servo
Trans: Stealth B4, Revo Shafts
Axles: TLT, Xtreme RC Hobbies axle ends, 32mm Tobee Craft Wideners
Tires: 2.2 Xtreme Red Rocks, 2.2 Xtreme RPM Wheels
WB: 15in
Overall Width: 12in
