microrover
Newbie
my micro range rover classic full interior
-
Welcome to RCCrawler Forums.
It looks like you're enjoying RCCrawler's Forums but haven't created an account yet. Why not take a minute to register for your own free account now? As a member you get free access to all of our forums and posts plus the ability to post your own messages, communicate directly with other members, and much more. Register now!
Already a member? Login at the top of this page to stop seeing this message.
Losi Micro Crawler Picture Archive
- Thread starter 701 Technique
- Start date
Shape_Shifter
Rock Crawler
johnnyh66
Scale Detail Engineering
The body is currently just sitting on top of a TMC chassis...
I'm going to build a separate scalish monster out of it and keep the TMC for crawling.
I'm going to build a separate scalish monster out of it and keep the TMC for crawling.
Stormin2u
I wanna be Dave
Last edited:
I have mine posted in the micro scale forum, since I have a scale Chevy body mounted most of the time ( http://www.rccrawler.com/forum/showthread.php?t=284384 ), but I just figured out how to mount the stock body on my different mount system so I'll show a pic here as well.
-ESC decased & moved to front axle
-Battery over rear axle- running a 220mah nimh from the Micro Rally/SCT (& the stock one)
-PVC beadlock mod & solder in the wheels, cut foams
-Stretched to 4-3/4" WB by making longer rear links (MiniT rod ends & 2-56 all thread
-HiTech HS-65 servo
-Red MicroT springs on rear, a couple coils turned around shock ends
-stock front springs, several coils turned around shock ends (need to swap to the white MicroT's)
-ESC decased & moved to front axle
-Battery over rear axle- running a 220mah nimh from the Micro Rally/SCT (& the stock one)
-PVC beadlock mod & solder in the wheels, cut foams
-Stretched to 4-3/4" WB by making longer rear links (MiniT rod ends & 2-56 all thread
-HiTech HS-65 servo
-Red MicroT springs on rear, a couple coils turned around shock ends
-stock front springs, several coils turned around shock ends (need to swap to the white MicroT's)
Shape_Shifter
Rock Crawler
Shape_Shifter
Rock Crawler
Rubbaneck
RCC Addict
New for our Xmas tree. :ror:
rik
RCC Addict
yet another reincarnation...
Snow Trooper
Newbie
My Chevy
Griff
Newbie
the scizzle
latest body mods
latest body mods
SpeedyG
Quarry Creeper
Not sure if I've put the latest mods in here yet... Check out my "CreepyG" build thread for all the specs...
bpd964
Quarry Creeper
Mini me..
bluice
Pebble Pounder
Been spending all my time...and money...on the LNC. Needed to show the little guy some love ;-)
Blade TMC chassis, BWD wheel weights, and droop setup!
Blade TMC chassis, BWD wheel weights, and droop setup!
Dr. Kustom
Pebble Pounder
Arctic Trucks - Toyota Land Cruiser 80.
Dr. Kustom
Pebble Pounder
Thanks guys!
1 more...
1 more...
Hello guys... I am new at this forum..
Here is my little on going project, I got it over a month ago and constantly I am experimenting little mods.
I have got some great Ideas from this forum, thanks to all.. hope to participate and be an active member of this community...
MODS
Trimmed springs.
Rewired to soft wires.
Relocated electronics to top of servo.
Added a lipo meter.
3.7v 1050mah Lith. batt.
Added Lead bars to the lowest place I could hook them (diferentials F&R) but will
soon replace with soldering wire rolled to the inner rims.
Here is my little on going project, I got it over a month ago and constantly I am experimenting little mods.
I have got some great Ideas from this forum, thanks to all.. hope to participate and be an active member of this community...
MODS
Trimmed springs.
Rewired to soft wires.
Relocated electronics to top of servo.
Added a lipo meter.
3.7v 1050mah Lith. batt.
Added Lead bars to the lowest place I could hook them (diferentials F&R) but will
soon replace with soldering wire rolled to the inner rims.
Last edited:
