DX5c Programming Throttle On/Off to Switch E

[3Gunner70]

Hello Fellows,

Need some help. Regarding DX5c Programming Throttle On/Off to Switch E.

I've been told that I can have a programmed switch that will drive the car constant by itself as high or low through the trails instead of using the trigger. I've been trying to do this by changing a few things and I have come up empty handed.

Can someone please give me some detailed steps on how to accomplish this with the DX5c.

Appreciate the help.

Many thanks,

Jim B.

 

[HumboldtEF]

I've never done this but you might be able to get there using Mixing.

EDIT: If that doesnt work you could also use the throttle trim. You'll need to change the step amount to get anything more than a snails pace. Go to the trim setup menu, scroll down to Throttle and change the value from 9 (default) to 20 which is the max, this changes how big the step is between button presses.
This will require more that one button press BTW

 

[3Gunner70]

Many thanks! The throttle trim to 20 did it. I was using small amount before and nothing was happening. It engages with the A switch now around 3+. Making a slow and controllable crawl with a good torque. Not sure why the default nine took more to engage.