Yeah the first post basically covers it. With a brushed motor you aren't going to get much faster then stock. A 13t Crawlmaster or 27t Torquemaster.
-
Welcome to RCCrawler Forums.
It looks like you're enjoying RCCrawler's Forums but haven't created an account yet. Why not take a minute to register for your own free account now? As a member you get free access to all of our forums and posts plus the ability to post your own messages, communicate directly with other members, and much more. Register now!
Already a member? Login at the top of this page to stop seeing this message.
Choosing a motor and ESC for your Wraith - Gearing Added!
- Thread starter Harley
- Start date
Yeah the first post basically covers it. With a brushed motor you aren't going to get much faster then stock. A 13t Crawlmaster or 27t Torquemaster.
dogzpolo
Rock Stacker
Ok thanks. that is good to know
How is the 18,5T Novak Goat 3S gonna perform? I'm currently running 3S lipo on stock motor and ESC, but the motor is starting to smell funny.:lmao: What I'm looking for is some more torque and maybe a hair more wheelspeed. I also want to keep some dragbrake, maybe like the stock. Or maybe go a totally different direction and go for HH BR-XL and a brushed motor, I'm really pleased with the performance of the HH in my Wheely king running 3S.
I can justify that is an awesome combo as i am running that. Swap the pinion/spur to the 32 pitch and crank down your slipper. (I wanna get rid of my slipper but what do you need? Not helpin if its cranked down, Eh. Dont really care losin a $5 spur gear once in a while) second thought don't crank the slipper if runnin plastic transmissision gears. still a really good combo.
For the money there are much better choices. It works but if you have driven the other systems you'd understand.
madkawi650
Rock Crawler
UPDATE!
Upped the gearing to 22/87 and through in a 3s lipo.. Yee haw.. Low speed control and lots of speed.
10 minutes of beating the crap out of it in my yard with about 85 donuts and 50 sliding power turns. Did some crawling over the wood pile and then checked the temp on the motor. 105*f and I used 600 mah out if a 3000 mah 20c 3s zippy lipo.
Broke the bumper mount when I crashed into my wife's ford escape, but other than that it was Awesome..
Highly recommend this as a cheap upgrade.
Sent from my highly abused iPhone using Tapatalk
Started with a mmp & d317.5 (ok), went to hh11t alittle to hot it got but works great in my scaler and finally back to mmp w/ tekin pro4 3300 and for the 15min I played all I can say is wow !! Also went to 32p 12/54.wheely if u want and she seem to climb no problems on my little house course. True test to come this weekend!
I meant the Tekin 13.5& MMpro. Drag brake kinda sucks. I have the Holmes 13 turn and his Speedo on order. Tell John you video is good advertising.
bmf24
Quarry Creeper
After i burnt up a couple motors (the stock one, then a hpi 27t) i read up and changed the gears. i ended up with 87/18 48p and it made it crawl like a champ with another 27t, but it was slow. my 4yo could run faster than it. i picked up a 3s lipo today and threw that in. it crawls awesome still, but is fast like it was stock. after a good 30min of full throttle thru the leafs and 10 min in the rocks, the motor was warm, but i was able to touch it. a huge improvement. re-gearing should have been the first thing i did.
next is a holmes 13t and brxl (hopeing for a christmas present)
thanks for all the info everyone
next is a holmes 13t and brxl (hopeing for a christmas present)
thanks for all the info everyone
Last edited:
Elliott000
Rock Stacker
I just smoked the another axial 20 turn on mine... Stock gearing, mmp and 3s. I have spare axial 27t im gunna thdow in temporary or until another smoke show lol. I wanna go brushless but my lhs only has a couple tekins now bout 110. A piece
Sent from my GT-I9100M using Tapatalk
Sent from my GT-I9100M using Tapatalk
Regear first.
Elliott000
Rock Stacker
Im not super familiar with gearing would i b aiming for higher speed or torque... Can u suggest a good pair to start out with
Sent from my GT-I9100M using Tapatalk
Sent from my GT-I9100M using Tapatalk
Try out 84 spur 16 pinion. The stock gearing is too high and can cause motors to burn up quickly.
No that's fine. He wants to use a stock axial motor which is just a lower quality motor then a handwound. Lower gearing will just help it last.
Elliott000
Rock Stacker
Im all for spendin 100 for a can, just dont want to fry it lol
Sent from my GT-I9100M using Tapatalk
Sent from my GT-I9100M using Tapatalk
I'd throw that Axial in and get the gearing where you like it. Then upgrade. If you aren't super familiar with gearing it'll be a great exercise to practice.
trailertruck
Newbie
Question can the stock axial ESC AE-2 handle a 11 turn cobalt or is it limited to all 20 turn motors thank you.
