3s lipo motor reccomendations

[Yuendawg]

Looking for reccomendations on motor for my Yeti setup. I've done some research but still looking for updated opinions. I'm running my Yeti for bashing and speed. I've been looking at the HH 540XL puller, Tekin Pro4, HW 3656SD. Any others I should consider?

My esc is a MMP and I use a 3s 6500mah.

Should I go 3500 or 4000 kv units?

Thanks in advance!

 

[8000ft]

I can recommend the Pro4 HD. I'm running the 3500KV

 

[magic_yeti]

i'm running the cc 1410 3800kv with 5mm output. waterproof and lots of power.
happy with it so far, but it's unsensored. if it should be sensored i would go with the hh.


Gesendet von meinem T1-A21L mit Tapatalk

 

[baggg]

All the breakages happen on 3s. 2s is loads of fun and still pretty safe. Are you sure you want to go 3s.....

 

[mikemcE]

I just put the tekin Pro 4HD 3000 Kv sensored... Great smooth response , gobs of torque, sweet and smooth

 

[MeanTT]

I run a leopard 4065 2700kv but changed the gearing to get higher top speed since the KV is lower. I can't remember the gearing but remember that I geared to to be about 20% faster than stock. It's a non-sensored motor, but has amazing power. You can run up to 5S with it as well. I got my motor for 49 dollars. With massive 2.2 swamper XLs running on Method wheels, my motor temps are 130. Lots of capacity to move up the voltage but it already breaks enough parts as is. I am still using the stock ESC as well.


Sent from my iPhone using Tapatalk

 

[Caswell]

Toro Pro4-S. Very similar to the Tekin Pro4HD, but way cheaper. I love mine on 3s.

 

[Yuendawg]

I love the 3s setup on the stock motor but looking for a bit more speed. I've been looking at the toro s-pro as well but cannot find it anywhere. Just recently looked into the Maclan MR4....anyone use this brand yet?