3A BEC for Savox 1210SG

[obadvw]

Hello there;
i am new to crawlers and recently got my TRX4 Kit built and add Bronco Body to it.

Noticed the weak stock servo immediately and ordered Savox 1210SG WP.

heared a lot about Stock traxxas ESC won't handle that Servo

my question is will a 3A UBEC from hobbywing is sufficient to run that servo?

thanks in advance

 

[Smokin' Joe]

I would guess it would be fine. I have one crawler that has 4ws with a 20kg servo at each end. I am using the hobbywing 3A ubec and have had no issues.

 

[QuesoDelDiablo]

It will probably work for 60-70% of your day. Savox servos are especially power hungry and will want more then 3Amps at peak load though

 

[MasteroFlego]

Skip that and get a Castle bec or a heyok no-brainer

Sent from my SM-G960W using Tapatalk

 

[Inspector86]

Install the HW1080 ESC and you won't need a BEC. Also note that you must run the stock RX and shift servos at 6v if you want them to live.

 

[Hydrocarbon92]

If you can get stuff from China, look for the Henge 8A BEC.

https://www.ebay.com/itm/HENGE-5v-6...166222?hash=item2ef208ea8e:g:lFYAAOSwsTxXkdPb