2.2 Clod **Track Width under 10.5in**

[run2jeepn]

I had enough rings made up to do 3 sets of Wheels. I sold one to a buddy on here. And kept 2 sets for my Self. I'm doing one with the 2.2 BadLands and one set with the Losi Claws as soon as I get more in stock. Losi Claws should be back in stock by Nov.

I tryed to mount these wheels on my WK.... The wheels don't clear the steering arms. If you try these wheels on a WK make sure to narrow the wheels alot.

 

[scalecrawler]

Just by what I have read, It sounds like If I wanted to do this I couldnt use stock clod axles tubes and nuckels.?

 

[run2jeepn]

Just by what I have read, It sounds like If I wanted to do this I couldnt use stock clod axles tubes and nuckels.?

Correct.., but the Stock Plastic Tubes are the first things to break. And those stock plastic Knuckles bend very easy and become weak over time.

 

[scalecrawler]

Well I just got a used/new pimpcane. So This is up next, so maybe soon Ill be able to affoard to do this.

 

[scalecrawler]

Tonight I started to chop up some of my stampede rears, and some stock clodbuster wheels, and well the 2.2's are narrowed to 1" and I have a width of 10 3/4" just the wheels on the stock clodbuster axle so you have me, but eventually Ill get it there. Ill get pics ounce all of them are finished being glued.

 

[1beatjeep]

has this been ran in a comp yet.if so how did it do.........

 

[run2jeepn]

has this been ran in a comp yet.if so how did it do.........

I haven't had a chance to finish mine yet. One other person has these, but I'm not sure if he has ran them in a Comp.

My plan is to run Losi Claws on mine. It brings the track width down so Much. That I think Losi's would do well.

 

[BrandonW]

standard 2.2 losis or modded ones that are taller?

 

[run2jeepn]

standard 2.2 losis or modded ones that are taller?

Standard..

 

[run2jeepn]

Finally Tracked down some Losi 2.2 Claws. Mocked them up. Track width is around 10-3/8in maybe a little narrower. As soon as I rebuild the axles and finish up all the wheels. I get some pic's posted. If anyone is interested in what wheels and the info on the Rings. I can take pic's while I mod one of the wheels and do a How to on it...

 

[JeremyH]

Yep, Yep. Very interested!

 

[Cslax06]

Your diff. clearance must be horrible with the standard Losi's I would assume. Pictures?

 

[run2jeepn]

Your diff. clearance must be horrible with the standard Losi's I would assume. Pictures?

Not as much as you would think. But mine are Shaved. I'm talking about 3/8 to 1/4in diff between the Clods and the Axial/WK/TLT-1's.... But I have IN'ers more of Center Clearance. If I see it has an issue. I'll just make some Losi's that are 5.25in instead of 5in. I'll gain that .25in Back.

 

[run2jeepn]

With 5.84in 2.2 Badlands

With 2.2 Losi Claws

 

[crawl rookie]

Looks great!

Hopped by my LHS and i just saw some tamiya rear wheels with the wheelnut on the outside of the wheel completly!
I think im gonna buy a set an see how narrow i can go with normal wheels!
Alreade tryed tamiya drak impactw heels wich put a nice narrow offset but just wann see how narrow i can go;-)
Sorry for hijacking your tread"thumbsup"

Good work!

 

[1beatjeep]

Finally Tracked down some Losi 2.2 Claws. Mocked them up. Track width is around 10-3/8in maybe a little narrower. As soon as I rebuild the axles and finish up all the wheels. I get some pic's posted. If anyone is interested in what wheels and the info on the Rings. I can take pic's while I mod one of the wheels and do a How to on it...[/QUOTE

yes i am interested the rims can you show then.And the ring also.


thanks

 

[racerrandy]

Can we use these tubes and knuckles with stock axles or do we need cvds?

I have the straight axle kit I bought from you, I assume it will work as well?

Thanks for the heads up on these parts. I am signed up for the Midwest 2.2 challenge and I think these parts are going to be needed.


Later,Randy

 

[run2jeepn]

Can we use these tubes and knuckles with stock axles or do we need cvds?

I have the straight axle kit I bought from you, I assume it will work as well?

Thanks for the heads up on these parts. I am signed up for the Midwest 2.2 challenge and I think these parts are going to be needed.


Later,Randy

All these parts are already for Sale on my website. They work with TTR axles, Hot-Racing Axles and Stock Axles. Zero Issues with all of those.