• Welcome to RCCrawler Forums.

    It looks like you're enjoying RCCrawler's Forums but haven't created an account yet. Why not take a minute to register for your own free account now? As a member you get free access to all of our forums and posts plus the ability to post your own messages, communicate directly with other members, and much more. Register now!

    Already a member? Login at the top of this page to stop seeing this message.

servo

  1. M

    hitec hs7980th servo problems.

    OK so I used some synthetic grease for the gears and clear coat painted the circuit board and the end of the motor, and then siliconed around it. I was playing in a puddle. It worked after that, then it just stopped even powering on. I took the connector apart and attached the power and ground...
  2. H

    battery cable problem

    Need help! I am newbie to MRC, first step I wanna do is move battery to front, but I find out the cable is not long enough. What kind of cable I should get? If change the battery to lipo with a EC3 connector, how could I connect to ESC then? Thank you guys very much!
  3. B

    servo help please...

    i have a redcat rs10 xt 2.4 ghz... do i need a digital servo or analog...
  4. LuckyDevil

    Hitec 7950 possible center case Mod, time will tell......

    I'd like to see what others think of this idea for improving the durability of the center case of my hitec 7950..... Here's a link to my build where I tried to explain what I did. I stripped the ti gears out once and broke 3 of the middle housings. You can tell it's broke when you get a lot of...
  5. V

    how many servos venom creeper

    hello all, I am wanting to order a venom creeper for myself as a first rock crawler, I have downloaded the instructions and am confused by one thing, How many servos do I need and what are the specs of those servos? any help would be greatly appreciated. Thanks, Vortex
  6. R

    Servo turning problem

    I have a axial ax-3 controller hitech(just opened today) hs-5646wp servo and my esc is a AE-2 Okay my problem is I only have steering when I turn my steering trim up, when I turn my steering trim all the way off I have no steering at all..
  7. R

    Which servo?

    Which hitech waterproof servo has the most ounces of turn?
  8. R

    Servo is going crazy!!!!

    I have a AE-2 ESC and a AX-3 controller and I have the stock axial servo.. when I turn my controller and truck on my servo goes all the way to the right and stays there and I have no steering at all :/ Please help its no fun having my rig not running :((
  9. R

    "waterproofing"

    I'm new to the rc rock crawling deal here i am a big fan of rc stuff and i own many toy-grade rc cars and i want to jump into something bigger. i have read that you do need plastidip and marine grease for waterproofing or should i say waterproofing as much as you make it. I have seen countless...
  10. P

    Crawler King ESC and Servo

    I don't imagine there is going to be an issue with this but I thought I would ask to be safe. Would it be ok to put a Traxxas XL5 ESC and a Traxxas 2075 high torque servo in the Crawler King?
  11. M

    Best servo for Axial Wraith

    Hi, i'm converting my Axial Wraith into a full on crawler. I have a 35T motor and an Axial AE-2 ESC. What servo would be the best one to turn 2.2 Ripsaws on RC4WD aluminum rims? I have a Hitec HS-645MG in it but it only has 133 oz. in. of torque.
  12. M

    Where can i buy servo bearings???

    Hi I need new bearings for my Hitec HS-645mg servo but I can't seem to find them anywhere. Does anyone know the dimensions of the bearings or where I could buy them?
  13. X

    scx10 Chassis Mounted Servo CMS mod detailed write up

    Hoping a mod can make this a sticky Hello well i was tinkering the other day after seeing they want about 50$! for a CMS kit and came up with this and figured id do a write up for you fellow scx10 guys and gals. All in all it should cost about 1$ and 10mins of your time. Tools needed: File...
  14. lordjasper1988

    how many servos on one channel?

    hey guys i have had a thought on modding my scx10 and tt-01. i want to put interiors in both but i wanna animate the drivers heads and the searing wheels. and i wanna run 3 servos off the steering channel. 1 for the steering 1 for the head and 1 for the steering wheel. so what i want to know...
  15. C

    Servo spline count.....what to use where...

    OK, I didn't find a single thread but bits & pieces here & there. For "standard sized" servos (Futaba 7955 as an example) (1.57" x 0.79" x 1.50" or for the rest of the world 40mm x 20mm x 38mm), the below is a guide on spline count. 23 splines: KO, Airtronics/Sanwa, JR, ACOMS, Solar, EXI...
  16. R

    steering and servo questions

    just wondering what you need to get steering in the back connected the the steering in front and where i can get it:?:
  17. P

    Servo problem...

    Hi, I was working on my losi mrc pro rig. After all ther wiring was done, I turned on the switch of my ESC and transmitter, my Hitec HS-645 MG servo started to turn to one side and keep trying to turn even though it reached to the end. I tried to control it with my transmitter but didn't do...
  18. S

    servo axial rtr am radio

    my buddy has a ax10 rtr rock racer an older one with am radio we upgraded to a 3305 futaba servo but we didn't realize that it is nicd only the servo that is. just wondering if u guys could point me out one that will work with nimh cause thats what batts we got for now and i read somewhere that...
  19. P

    Hitec HS-225MG servo?

    Hello guys, I just got MRC Pro and serching on the internet for electronics. It is first time trying rock crawling for me so I'm kinda having difficulties to choose fairly good products with my low budget. After reading threads in this forum for hours I decided to get stock motor this time...
  20. tbilz

    servo conversion to winch

    Hey, I saw a guy with a servo that he was using as a winch for winching down his suspension. I would like to know how to rig something like that up. Sure its an easy project, I just need some direction. Thanks
Back
Top