• Welcome to RCCrawler Forums.

    It looks like you're enjoying RCCrawler's Forums but haven't created an account yet. Why not take a minute to register for your own free account now? As a member you get free access to all of our forums and posts plus the ability to post your own messages, communicate directly with other members, and much more. Register now!

    Already a member? Login at the top of this page to stop seeing this message.

servo

  1. G

    Axial SCX10 steering servo

    hey guys im new here and gotta ask one question. my axial scx10 has trashed 3 steering servos in past week? im running stock hubs, aluminium linkage and 30 grams of weights in each tire with no servo saver. all help highly appreciated.
  2. S

    Mounting Futaba round horn servo

    Sorry if my question sounds silly. I am planning to get Futaba BLS177SV. But from the picture it uses a round horn. Just wanted to know how I can mount this servo to wraith? Can I attach the link to the round horn directly, or any special thing required? Btw, anyone has experience with this...
  3. N

    savox sc1232sg servo waterproof?

    i just picked up and installed a new savox servo (sc1232sg) on my wraith and its not advertised as waterproof but was wondering if it was infact waterproof or water resistant, anyone submerged this servo?
    • Nemo
    • Thread
    • savox servo waterproof wraith
    • Replies: 4
    • Forum: Electronics
  4. lowlow

    Wtf!!?? Never had these servo problems

    Here's the deal.. Have been in the RC crawlers about three years, drive every day, and have built so many different rigs that I think I have experienced almost every problem possible. But this shit is weird.. I had a 7955 on one of my wraiths and it started acting funny, jiggering shaking...
    • lowlow
    • Thread
    • hitec 7955 servo servo help
    • Replies: 2
    • Forum: Electronics
  5. S

    CMS limits steering?

    Hey guys, still a bit of a newbie here but thanks to all the great threads and advice in the forums I feel far more confident then I ever used to. I installed an RC4WD CMS/Panhard kit on my wraith. I know there is no performance gain, but I like the idea of being able to easily separate the...
  6. B

    Parts for Axial AS-3 servo

    Any one know if it is possible to get parts for the AS-3 servo? Stripped a gear in it and was thinking if I can get parts for it cheap, than I could keep it as a spare. Got a Savox SC-1256 servo on the way which I'm gona use in my rig, and as I said, thinking about using the stock one as a spare.
    • Binni
    • Thread
    • as-3 axial servo wraith
    • Replies: 0
    • Forum: Electronics
  7. A

    Axial stock servo issue

    I'm having somewhat an issue with my never has any problems,cream of the crop stock Axial servo (sarcasm). Now obviously i do plan on replacing it but for now it has to suffice, ever since i switched out my receiver and possibly before, it does not turn "lock-to lock" as far as it used to. I do...
  8. Crawler Ted

    Servo repair on the winter trail

    Hey Guys ! Thanks for stopping by CTG ! This time I have a servo here I was going to install into the G-Made Sawback build . As I went to do so I realized the gear inside is broken . I was going to do the repair quick fast in the shop but thought I would instead take it outside in the cold...
  9. B

    Reversed steering??

    First of all, yes, I have looked and looked before I started this thread. I'm *NEW* to RC's and don't know jack about them. So don't hate. I replaced my stock wraith's steering servo, with a digital Savox SA-1230 SG. I was careful to note which way the factory servo was plugged in and plugged...
  10. S

    servo humming

    My digital servo hums whenever truck is on it is an scx10 with custom frame mounted hitec hi torgue mg servo tekin t35hd 19t pinion 87t spur tekin for ESC. Rc4wd wagon wheels dick cepek mud tires . spectrumdx3c and sr301 3racing winch. I'm running 8.4v NiMH and have no external bec am I going...
  11. C

    Steering Servo and Rod question

    I have a Savox (1238 I think) and I have adjusted the steering horn to allow for the best possible and equal turning and caster, but when I turn all the way to the right it seems as if my servo locks out and it won't turn the wheels back from the far right locked out position without some...
  12. M

    Steering Servo Trouble

    I recently put my losi night crawler back together. Also hooked my servo up to my connecting rod. But as soon as I turn it on the wheels go to the left.......did I do somethin wrong? I know its in the right spot on the reciever but cannot figure out why it is doing that? And the trim only moves...
  13. T

    ARRMA ADS-5 or ADS-7 Servo from Arrma

    My friend is doing a CC01 Landfreeder build and is on a VERY tight budget but would like a waterproof servo. I know that you can waterproof a servo by doing it DIY but he would like to not be taking the risk of mucking up as my servos haven't lasted too long :oops:. So I was looking for cheap...
  14. Y

    Custom Mad torque dig

    I just thought that i would show off my custom dig that i made our of a old servo, 3 position switch, some wire and a old cork place mat. I started off by getting a old servo and a circular servo horn and cutting a hole in the servo horn. With the switch i mounted it to the cork board with the...
  15. merin_83

    Steering issues

    Hi Guys, I have the new wraith poison sypider, and installed the castle BEC 10A and 3S lipo 2200mah (20C), the issue i face is that when on rock or hard surface, some times the tires wont turn even if i give steering inputs. But as soon as i move feet or so, the wheel turns, what...
  16. S

    BEC necessary with upgraded servo(s)?

    Some here are recommending adding a BEC to the stock ESC in order to: protect it from the higher current draw of more powerful servos provide more amperage to the higher-torque servos What's y'all's experience been? Is a BEC really necessary? If so, what amperage @ 6v? What are the chances...
  17. R

    Hitech 7954sh question

    Hey crawlers recently purchased a hitech 7954sh and it says its rated for 6V or 7.4V i understand you can hook this too battery power but i use lipo and its only increments of 4.2v? So the next one up is 8.4 too much voltage:/.... Can someone explain what and how i need too wire this? If all...
  18. Gear Head RC

    Gear Head RC Twin Hammers Shift Servo Plate

    Want to add a standard size servo to your Twin Hammers shifter? This laser-cut, .090" thick Delrin plate also gives you space to mount a small ESC or BEC. Get yous here: Gear Head RC Twin Hammers Shift Servo Plate Step-by-step instructions coming soon...
  19. M

    Want to buy Trail Finder 2- Need help

    Hey guys I'm looking to buy the Trailfinder 2 and I need some advice. I really like the TF2 and prefer it over SCX10 because there are more metal parts and it looks better than the SCX10. First off, I have Traxxas 2075 servos and I'd like to know if this will work or not for shifting? I also...
  20. 1

    what to do first?

    hi i am getting a axial wraith for Christmas and i was wondering what should:) do to it first?http://www.rccrawler.com/forum/images/smilies/icon_smile.gif
Back
Top