• Welcome to RCCrawler Forums.

    It looks like you're enjoying RCCrawler's Forums but haven't created an account yet. Why not take a minute to register for your own free account now? As a member you get free access to all of our forums and posts plus the ability to post your own messages, communicate directly with other members, and much more. Register now!

    Already a member? Login at the top of this page to stop seeing this message.

servo

  1. P

    crawler hauler

    ok so I'm building a quad cab Chevy 3500 dually rig. gonna be a hauler for my scx10. it will be a flat deck with a wedge and flip down ramps. I'm starting to piece together the electronics now as I have pretty much everything else ordered or on the way. it will be front mount motor/2 speed trans...
  2. S

    Has anyone used an HH SHV500 LP servo on their Gspeed with G-LD servo mount?

    I’m wondering if the low profile servo will cause the servo arm to come into contact with the panhard.
  3. S

    MambaX BEC and High Volt Servo Question

    I’m wondering if the built in BEC in the Mamba X is sufficient when using a Savox 1210SG servo. It says the BEC can handle 8amp 8V. Does anyone have experience with it? Setup Mamba X: 8V 8amp BEC Savox 1210SG: 7400mA at 7.4v HH Puller Pro Stubby V2: Not sure of Amps FS-BS6 Receiver: 8.4v max...
  4. S

    Looking for help understanding external BEC’s and why I need one

    Hello everyone! My SCX10II build is almost complete and with that it’s about time to start installing electronics (the most foreign part to me). For a frame of reference here are the electronics I’m working with: Hobby Wing 1080 ESC Castle Creations 10 Amp BEC Savox 1210SG servo (7.4v...
  5. S

    Help programming Castle Creations 10Amp BEC with Mac computer

    Help programming Castle Creations BEC with Mac computer Is there any way around not having a Windows PC and programming the CC 10Amp peak to output with a 7.4v servo? I personally don’t own a computer, but my girlfriend has a Mac laptop for her work. It’s her works laptop so I can’t exactly...
    • SaltyDog
    • Thread
    • bec castle bec castle creations castle link servo
    • Replies: 10
    • Forum: Electronics
  6. S

    Looking for recommendations on a servo and servo horn that will fit SCX10 II

    Hello everyone. First time posting here but I’ve been using this forum as a learning resource for a couple months now. Figured it’s time to start asking some questions of my own. I ordered an SCX10 II builders kit yesterday with a HW 1080esc and Holmes Hobbies Trailmaster Sport 550 21t...
  7. H

    Steering servo twitchy, RX or TX problem?

    heya Crawlers! Long time lurker first time poster here with a problem I need to pick your brains on before i go out and spend more money on new parts. I just got a used Axial SCx24 and the steering servo "sometimes" twitches over to one side when I turn my TX dial/steering wheel. The...
    • Hawk3ye
    • Thread
    • problems receiver servo transmitter
    • Replies: 1
    • Forum: Electronics
  8. A

    Steering servo seems to have died in a way I've never seen, need some thoughts on it.

    Here's my set up: SCX10 II Holmes Hobbies motor Hobbywing 1080 ESC 3s 1300mah LiPo Spektrum DX5C TX Spektrum SR6100AT RX EcoPower WP120T servo My 1080 is set to put out 7.4 volts and, based on my receiver telemetry, it puts out a very consistent 7.3-7.4 volts. My servo is ran straight...
  9. T

    Sanity check my upgrade plan

    I have an old Wraith 2.2 that's been dead in a closet for 4-5 years and I recently got working again. I was still on the stock electronics but I had worked through replacing a lot of the linkage and suspension with metal, by way of breaking something plastic every single time I took it out. As...
  10. C

    TRX-4 build questions

    So, I'm planning on buying a TRX-4 Defender. I've read that the servo isn't good and that if I change the servo I should really get a BEC. These are the applicable things that I have sitting around already from my other RC cars and helicopters: An old unused Overlander UBEC (4.8/6v selectable...
  11. T

    Sanity Check

    Hey guys, Ok, so the used Summit I picked up has some peculiarities. One of which, and is why I'm starting this thread, is the steering servo. It's a Savox Digit SA1230SG. Says it's got 416ish oz-in of torque vs what, as far as I'm finding, is the stock Traxxas 2075 servo of 125 oz-in...
  12. V

    Help me upgrade SCX24 servo

    I like to upgrade the servo in SCX24. I found two possible options. 1. SH 0257MG 2. EMAX ES08MA II #1 is twice as expensive as #2, but I couldn't find any details of them. Could anyone provides how similar or different they are? Which one would you recommend me? p.s. For some reason, I...
  13. O

    Servo won't stop

    When I power on my Servo cranks over and keeps cranking. What is up?
  14. T

    AX10 Deadbolt doesn't like the 20kg PowerHD servo?

    I tried to use a servo I had lying around and the ESC constantly beeps, plus the servo turns weird (gets stuck a few seconds at full turn, reacts slowly or jitters. Servo is fine on my 1/8 buggy. Is the stock ESC a PoS? (its the one that takes max 2S) Do I need a BEC for a strong servo? Thanks...
  15. Talico

    Custom Servo Plate to accomodate diff lock servo

    Hi there! I'm looking for the post that showed how to modify the servo plate to accommodate a servo for the diff lock. I've searched high and low and can't seem to find it. Can anyone please help? Otherwise I have to design it myself and that would just be a schlep :ror:
    • Talico
    • Thread
    • creeper diff lock plate servo venom
    • Replies: 2
    • Forum: Venom Creeper
  16. M

    Servo glitching/cutt off?

    I have been the owner of an SCx10 II for 2 years now. Since its maiden voyage it has run a Holmes brxl esc and a Savox Waterproof servo. It has work perfectly untill recently. I have been experiencing random cut offs to my steering. Some times it doesnt turn the wheels when I ask it too. Other...
  17. S

    Servo questions

    Ok I have searched some threads with no luck on this subject. What I want to know is if you have a 7.2 volt battery is it 7.2 volts in the servo? I heard really briefly that it's from the ESC. If it is in the ESC how do I find out how many volts go to the servo? Also if I get a servo with the...
  18. J

    TRX-4 bronco needs some help!

    Hey need advice...new trx4 bronco ....I know stock esc and servo is gonna crap out out shortly so I need opinions o. Replacement....local shop preaches castle....solid option plus they're local but I'm open to order and I'm new and need all yall help! Help!
  19. S

    Can I run all 7.4v servos at 8.4 volts?

    Hi team, I believe all HV servos are designed to run on a 2s lipo. this fully charge is 8.4v my question is can I set my BEC to 8.4V and run the servo within spec? really keen to hear your thoughts thanks for looking
  20. S

    Which Tekin servo?

    So the T-440, T-360 and T-300 all are the same size and cost. Why would you get anything but the T-440? About to pull the trigger for my SCX 10 ii. Thanks!
    • Stewy
    • Thread
    • scx 10 ii servo tekin
    • Replies: 10
    • Forum: Electronics
Back
Top