• Welcome to RCCrawler Forums.

    It looks like you're enjoying RCCrawler's Forums but haven't created an account yet. Why not take a minute to register for your own free account now? As a member you get free access to all of our forums and posts plus the ability to post your own messages, communicate directly with other members, and much more. Register now!

    Already a member? Login at the top of this page to stop seeing this message.

motor

  1. S

    Need help with finding the right electronics

    I'm very new in the rock racing world. What should I get for esc, tekin or castle? Prefer some water resistant. Plus some crawling time too. What about a motor tekin, castle or ? What about a servo with torque? What about a controller too? Need a battery too, 3c I've been looking...
  2. pingpaul

    Motor - 3500kv vs 3800kv

    Hi, I'm building my first kit, Yeti 1/10 and learning about electronic specs which is fun and I wonder if someone could explain is there a difference between a motor that is 3500kv vs 3800kv? I might start with a 2s lipo and switch to 3s if it's too slow for me. From what I've read and...
  3. G

    Help please!!!

    My steering just stopped working so I let the car cool down but now the car won't get any power now I think it might be the ESC because it was very hot. if so I need a good cheap ESC with a drag brake the car is a scx10 honcho stock ESC and a 35 turn motor, I've had it for 2 years
  4. tinyT1m7

    MMP with 1/8th scale motor?

    Will a MMP esc work with a Turnigy Trackstar 1/8 2100kv motor? I have had the mamba max pro, and have the new motor on the way. Going to gear it around 35mph.
  5. tinyT1m7

    Motor very hot - Tekin gen1 sensored

    In my Bomber I got a 17 tooth pinion and 56 spur. Esc is a mamba max pro, and motor is tekin gen 1 redline 13.5 turn sensored. After 10min or so of running, the motor is hot so that I can't even have my finger on it for a second. Is this OK to run the motor with this type of heat? The...
  6. J

    Scx10 motor and Esc help pleaseeee

    Hi ive had my scx10 dead bolt for a while now and i have 1.9 rock crushers on 5 lug wagon wheels by rc4wd.I want more torgue and less speed so i was thinking of putting a 35 turn ax10 motor on my stock esc would there be any problems with this or like malfunctions or will anything go wrong or...
  7. F

    High torque motor recommendation?

    Hi, newbie to rock crawling and brushless motors here. I want to pair a custom chassis(1/10 size) with two brushless motors for a robotic project that needs to be able to carry a payload of about half a kilo off road. I will probably have a two speed gearbox for high torque-low rpm and low...
    • fossil
    • Thread
    • custom chassis high motor robot torque
    • Replies: 36
    • Forum: Newbie General
  8. L

    Did I choose the right guts for my Axial Wraith?

    I've been assembling an Axial Wraith and I've gotten to the part where I need the motor and all that to put in it. Can anyone look over my list and tell me if these different parts will work together or will one part chew up another or will a motor get burned out or something...
  9. U

    MOW - Motor on wheel crawler

    Hi guys, this project was for a long time on my mind. I always wanted to build a crawler with a wheel hub motor. Finally I found electric components which seem to suit. I have already tested servo driven wheels, which was quite problematic. Now I m going for brushless gimbal motors. So let's...
  10. Olle P

    Motor theory... and practice.

    Investigating what’s behind the “Old Truths” and general advice regarding our typical use of electric motors. This apply to brushed and brushless motors alike, although for brushed motors I’m aware that some of the mathematical models used only work well within a narrower voltage range. The...
    • Olle P
    • Thread
    • efficiency motor motors power torque
    • Replies: 22
    • Forum: Electronics
  11. M

    Review of Leopard 4065 2700 KV motor

    So here it is, my review of the Leopard 4065 4 pole brushless motor in the Yeti. Well, I saw a good deal on ebay for the Leopard 4065 2700 KV motor for 45 bucks and free shipping. I bit. I have had experience with Leopard motors in the past, as I have the stock "Ripper" in my MT4G3 and it...
    • MeanTT
    • Thread
    • leopard motor motor and pinion yeti
    • Replies: 17
    • Forum: Axial Yeti
  12. M

    can i use my SC401V2 MOTOR on my D90?

    look for a motor for my new Fully Alloy Chassis D90,just check the Tenshock SC401V2,the size and KV is suit for my car ,did anyone have used it ?
  13. H

    help with ECU and Motor

    I'm new to crawling, I really need some help. I just bought a used SCX10, don't know which one it is. Would like help to find out what it is and help with the electronics. So, I have a XL5 ECU and 65x1 turns motor, not sure who makes it. Is that good for crawling? I'm having trouble with it...
  14. J

    Thoughts on HH TrailMaster BL in SCX10

    I am trying to decide on a motor for my SCX10 Dingo. I like to crawl, but it's also fun to speed around the yard too. My last motor was a Novak FortyFive (45t) motor, which seemed to be way to slow for my liking. I am thinking about mating my MMP with the HH TrailMaster BL, since Holmes has it...
  15. merin_83

    Question on Brush selection on CrawlMaster Expert 13t

    Hi Guys, I have a Wraith PS, for which i bought the CrawlMaster Expert 13t very recently and its good. But when i checked the brush length after 2 trail runs, it 8mm, and HH website says we should change after 7mm. So i guess it almost time to replace, but when i look the website there are many...
    • merin_83
    • Thread
    • 13t brush crawlmaster motor wraith
    • Replies: 19
    • Forum: Electronics
  16. N

    Axial wraith wheels stop and engine revs?

    so i was doing some crawling with my wraith and noticed that sometimes my wheels wouldnt move and the motor would rev. it happened when the car was pushing against the rock with its front tires. i have a 45t tekin heavy duty motor so it should be able to handle it. i took apart the transmition...
  17. S

    Iron shards/dust on motor can

    After putting about 8 packs through my Brushed Integy 55T, I noticed what appear to be either iron dust/shards or perhaps magnet shards stuck to the can. Is this normal? If not, what is going wrong? The motor is mounted to an RC4WD R2D trans and sits right next to the dig assembly. Could these...
  18. I

    Want speed and torque

    Hey, I have a scx10 honcho and I run a 19t motor for more speed and my gearing is 24/87 also for more speed. My battery is a 7 cell 8.4v nimh. I want my truck to be able to have lots of speed and torque like I see in some other trucks. How can I get mine like that. Do i need to build my own...
  19. R

    PLEASE HELP, burned out 3 motors in a week!!

    I have been burning out motors left and right. Tekin FXR, 35T motor, CC BEC, 32P gearing 9/60, Rockbeast 2 tires! Im Running 3s lipo, I have burned up 2 stock Axial 27T motors, and one Integy 35T motor. I got 2 new motors, a Traxxas 21T and a Integy 35T. I broke them in! I drive for like 5 min...
  20. S

    Motor Clearance Issues

    Guys, I am looking at installing an RC4WD R2 transmission in my R1 and am worried about how I'm going to shoe-horn the dig-servo, tranny, and motor into the little beast. I'm looking to go with a 55T brushed motor. Clearly what I am looking for are recommendations for a 540 motor with the...
Back
Top