Tucky
Rock Stacker
I haven’t upgraded the motor and esc on my Capra yet and the drag brake is almost non existent. Other than turning the nob on the transmitter is there a way to program more brake into this thing until I can upgrade the motor/esc?
-
Welcome to RCCrawler Forums.
It looks like you're enjoying RCCrawler's Forums but haven't created an account yet. Why not take a minute to register for your own free account now? As a member you get free access to all of our forums and posts plus the ability to post your own messages, communicate directly with other members, and much more. Register now!
Already a member? Login at the top of this page to stop seeing this message.
Capra ESC program/drag brake
- Thread starter Tucky
- Start date
I searched the manual (link below) and it doesn't even mention a drag brake. Best bet is to buy a HobbyWing WP1080 brushed ESC when you can (second link below). The 1060 will also have a drag brake, but it is far less adjustable and not nearly as good. You get so much more for your money with the 1080.
www.hobbywingdirect.com
QUICRUN WP 1080 G2 brushed ESC (2-3S)
HOBBYWING WP 1080 G2 suits BEST brushed ESC for 1/10th Rock Crawler THE GAME-CHANGERThe First "Real Car Mode" Water-proof and dust-proof for all-weather Rack Crawler application Fully Water-proof and dust-proof, suitable for all-weather races. Small size, with built-in capacitor module. Four...
www.hobbywingdirect.com
Tucky
Rock Stacker
That’s what I was afraid of, thanks
You're welcome. That was definitely a terrible cost-cutting measure by Axial/Horizon by omitting the drag brake. Once you are able to upgrade to the 1080, I am sure you will realize it is a much better ESC in every way. The only problem is that Axial/Horizon took the super cheap way out and combined the ESC with the receiver. That means you will probably also need a new transmitter and receiver. Those can be had from cheap to insane prices. People rave about the Dumbo RC radio sold on AliExpress and I'm sure other Chinese stores. I have no experience with it. You can also put up a wanted ad on this site and ask if anybody is selling an RTR take-off 1080 and transmitter and receiver. You may find these items for super cheap.
Shape_Shifter
Rock Crawler
Yes. I recently got an RTR SCX10 III and was amazed it didnt have a drag brake.
I thought the rtr SCX10.3 had drag break out-the-box but was set low. My old memory tells me it was set to around 4 and all you needed was the program card to adjust ... which also happened to work with the 1080 esc which was a bonus as it was a great upgrade.
The Spektrum Firma 2-in-1 that now comes in the Capra? When it was released in 2019, it had a re-branded 1060 standalone ESC.
Yeah, I hadn't even been introduced to the hobby in 2019 my bad. My SCX10.3 had the Spektrum 2-1 I believe.
Shape_Shifter
Rock Crawler
I guess I should clarify - yes, the SCX10.3 CJ-7 came with a 2-1 brick, and yes it has SOME drag brake, but not 100% drag brag like you would expect in a crawler.
Interesting that the new/current Capra manual does not mention drag brake. But if you download the manual for the "Spektrum Firma 40 Amp Brushed SMART ESC with Receiver" it does mention an adjustable drag brake if you use the DYNS3005 programming card that does look like it came from HobbyWing. So maybe there is a chance @Tucky. Did the Capra come with a manual for the ESC/receiver?
Tucky
Rock Stacker
I didn’t see one but I’ll look
Tucky
Rock Stacker
I ordered that programer so we’ll see how it does.
Please keep us updated once you receive and try the programming box.
Tucky
Rock Stacker
It showed up and I increased all the brake settings and it stops great now but it still won’t hold itself in place on an incline. I guess I’m only out $14 and the motor/ESC/transmission are all going to get replaced soon so I guess I can live with holding the throttle a little on inclines
Gearing also plays a role in how strongly a drag brake will hold, the lower geared/more geared down the stronger. Since the Capra isnt geared down a lot out of the box it doesnt surprise me that it wont fully hold the rig on an incline. That should be a decent improvement though.
Tucky
Rock Stacker
Ok that makes sense, thanks
Well the good thing is that it appears that programming box will work with HobbyWing products so if you buy something like the Fusion SE or Fusion Pro, you already have the programming box.
Tucky
Rock Stacker
The Pro is on the horizon
I have 1200SE on a stock Capra transmission with a 10t pinion and does pretty good slow crawl and plenty of punch for half the price of the pro, leaving budget to stuff a better/stronger servo in your rig. Pro is great for unlimited budget but I have many projects and rigs so icing sparingly helps to keep the herd going.
Tucky
Rock Stacker
I get that, there’s lots of things that are nice to have but not completely necessary. I have this stupid personality defect that forces me to get the best stuff even if I’m not the best. It’s only money right?
